Technical Parameters Electrical Ratings Product Type: AC contactor relay / auxiliary contactor Number of Poles: 4 (typically 2 normally open + 2 normally closed contacts) Rated Control Circuit Voltage (Uc): 220–230 V AC at 50 Hz 230–240 V AC at 60 Hz Rated Operational Voltage (Main & Auxiliary): up to 690 V AC Conventional Free‑Air Thermal Current (Ith): 16 A Rated Operational Current (AC‑15) (Ie): 4 A @ 220–240 V AC 6 A @ 24 / 127 V AC 2–3 A @ higher voltages (380–690 V AC) Rated Operational Current (DC‑13) (Ie): 6 A @ 24 V DC 0.55 A @ 110 V DC 0.30 A @ 220–250 V DC 2.8 A @ 400 V DC 1 A @ 500 V DC Rated Short‑time Withstand Current (Icw): 140 A for 0.1 s 100 A for 1 s Rated Insulation Voltage (Ui): 690 V AC Rated Impulse Withstand Voltage (Uimp): 6 kV Rated Frequency: 50 / 60 Hz Mechanical & Switching Auxiliary Contacts: 2 normally open (NO) + 2 normally closed (NC) Maximum Electrical Switching Frequency: AC‑15: ~1200 cycles/hour DC‑13: ~900 cycles/hour Maximum Mechanical Switching Frequency: ~6000 cycles/hour Operate Times: Coil energization to NO contact closing: ~10–26 ms Coil energization to NC opening: ~7–21 ms Coil de‑energization to NC closing: ~9–16 ms Coil de‑energization to NO opening: ~4–11 ms Connections & Installation Terminal Type: Screw terminals Tightening Torque: ~1 N·m Mounting: Standard DIN rail or panel mount compatible Degree of Protection: IP20 at coil terminals Physical & Environmental Approx. Dimensions (W × D × H): ~44 mm × 74 mm × 74 mm Weight: ~0.315 kg Operating Ambient Temperature: approx. −40 °C to +70 °C (varies by installation conditions) Storage Temperature: approx. −60 °C to +80 °C Standards Compliance: IEC/EN 60947‑1, IEC/EN 60947‑5‑1

Technical Parameters Electrical Characteristics Input Voltage Range: 100 – 240 V AC / 100 – 250 V DC (universal input) Rated Output Voltage: 24 V DC Rated Output Current: 3.0 A Rated Output Power: 72 W Adjustable Output Range: 24 – 28 V DC (via front potentiometer) Power Reserve Capability: 150 % output for ~5 s for high inrush loads Regulation: Stabilized switch‑mode output DC OK Signal: Relay contact output for “DC OK” status Protection & Performance Protections: Overload protection, short‑circuit protection, overheat protection Power Factor Correction: Active correction for improved efficiency and reduced harmonics Parallel Operation: Supported for increased capacity and redundancy with accessories Output Characteristic: U/I characteristic optimized for reliable performance Mechanical & Mounting Mounting Type: DIN‑rail (IEC 60715 TH35 rail) Terminal Type: Screw terminals Degree of Protection: IP20 housing and terminals Dimensions: Compact footprint suitable for control cabinets Environmental Operating Temperature Range: approx. –25 °C to +70 °C Cooling: Convection cooling (no fan) Standards & Approvals Designed for global usage with extensive approvals suitable for industrial and marine applications Active EMC and safety compliance typical for industrial power supplies

Technical Parameters Electrical Characteristics Type: Potentiometer (adjustable resistor) Resistance Value: 10 kΩ Power Rating: 2 W Number of Turns: Single turn Function: Variable resistor for control input Illumination: Non‑illuminated Connection Type: Screw‑clamp terminals Rated Insulation Voltage: Up to ~900 V AC (panel device rating) Contact Performance: Self‑cleaning contacts for reliable long‑term use Mechanical & Installation Actuator Type: Rotary knob Knob Bezel: Chrome metal bezel with black knob Mounting: Panel mount via standard hole (usually 22 mm cut‑out) Terminal Style: Screw clamp Module Compatibility: Modular pilot device range Dimensions & Weight Width: ~30 mm Height: ~30 mm Depth / Length: ~57 mm Net Weight: ~0.036 kg Environmental & Protection Degree of Protection (Front): IP66 (high resistance to dust and water ingress) NEMA Ratings: Type 1, 3R, 4, 4X, 12, 13 (suitable for various industrial environments) Operating Temperature: approx. –25 °C to +70 °C Storage Temperature: approx. –40 °C to +85 °C

Technical Parameters General & Mechanical Product Type: Empty enclosure for pilot devices Operator Positions: 3 seats (for mounting pushbuttons, selector switches, indicator lights, etc.) Material: High‑quality polycarbonate / durable plastic Color: Dark grey over light grey Mounting Type: Rear mounting (panel or enclosure) Cover Type: Lift‑off screw cover Fasteners: Stainless steel screws included Dimensions Width: approx. 0.181 m Height: approx. 0.061 m Depth: approx. 0.075 m Net Weight: approx. 0.116 kg Environmental Protection IP Rating: IP66 (dust tight and protected against powerful water jets) NEMA Ratings: Type 1, 3R, 4, 4X, 12, 13 (suitable for various industrial environments) Operating Temperature Range: approx. –25 °C to +70 °C Storage Temperature Range: approx. –40 °C to +85 °C Compatibility Designed for use with ABB modular and compact range pilot devices and contact blocks Suitable for mounting indicator lights, pushbuttons, emergency stops, selector switches, etc. Standards & Compliance CE compliant RoHS compliant

Technical Parameters Electrical Ratings Rated Voltage: 250 V AC Rated Current: 13 A Frequency: 50 / 60 Hz Active Pin Terminals: 2 + Earth (UK standard 3‑pin) Safety Shutters: Yes (protective socket hole shutters) Power Loss: ~0.6 W Mechanical & Mounting Mounting Type: DIN‑rail mount for electrical distribution boards Terminal Type: Screw/Cage terminals for secure wiring Cable Cross‑Section Range: 2.5 … 16 mm² Tightening Torque: ~1.2 N·m Width (Modular Spacing): 3 modules Approx. Dimensions: ~53 mm (W) × ~85 mm (H) × ~60 mm (D) Approx. Weight: ~0.095 – 0.10 kg Environmental & Protection Degree of Protection: IP20 (indoor panel use) Operating Temperature: approx. −25 °C to +35 °C Storage Temperature: approx. −40 °C to +70 °C Standards: Conforms to British socket and modular DIN‑rail mounting standards

Technical Parameters Electrical Ratings Rated Operational Current (Ie): 20 … 25 A adjustable range Number of Poles: 3 Rated Operational Voltage: up to 690 V AC / 250 V DC Rated Service Short‑Circuit Breaking Capacity (Ics): ~50 kA @ 400 V AC Trip Class: Class 10 (thermal overload protection) Frequency: 50 / 60 Hz Rated Operational Power (Typical AC‑3): ≈ 12.5 kW at 400 V AC Phase Loss Sensitivity: Yes Disconnect Function: Built‑in Protection & Functional Features Overload Protection: Adjustable thermal overload trip Short‑Circuit Protection: Magnetic instantaneous trip Trip‑Free Mechanism: Yes, prevents “weld‑on” failure Clear Switch Position Indication: ON / OFF / TRIP Padlockable Handle: Yes, in OFF position Temperature Compensation: Included for consistent trip performance Mechanical & Installation Control / Actuation: Rotary handle Terminal Type: Screw terminals Mounting: DIN‑rail compatible / panel mount Degree of Protection: IP20 Pollution Degree: 3 Handle Lockable: Yes Physical & Environmental Width: ~45 mm Height: ~97.8 mm Depth: ~86.5 mm Weight: ~0.31 kg Operating Ambient Temperature: approx. –25 °C to +60/70 °C Storage Temperature: approx. –40 °C to +80 °C

Technical Parameters Electrical Ratings Rated Current (In): 16 A Number of Poles: 3P (three-pole) Tripping Characteristic: D-curve (high inrush tolerance) Rated Operational Voltage (Ue): Up to 400 V AC (IEC 60898-1) Up to 440 V AC (IEC 60947-2) Rated Insulation Voltage (Ui): up to 440 V Rated Frequency: 50 / 60 Hz Rated Short-Circuit Breaking Capacity (Icn / Icu): ~6 kA at 400 V AC (short-circuit interrupt level) 20 kA at 230 V AC ultimate breaking capacity Rated Service Short-Circuit Capacity: ~7.5 kA at 400 V AC Energy Limiting Class: 3 Overvoltage Category: III Pollution Degree: 3 Mechanical & Connection Mounting: DIN-rail (35 mm) Terminal Type: Screw terminals Contact Position Indication: Red “ON” / Green “OFF” Modular Width: 52.5 mm (3 modules) Approx. Dimensions (W × H × D): 52.5 × 88 × 69 mm Approx. Weight: ~0.375 kg Electrical Endurance: ~20,000 AC cycles Mechanical Endurance: ~20,000 cycles Connecting Capacity: Solid conductor: 0.75 – 35 mm² Stranded conductor: 0.75 – 35 mm² Flexible with ferrule: 0.75 – 25 mm² Tightening Torque: ~2.8 N·m Environmental Operating Ambient Temperature: approximately –25 °C to +55 °C Standards & Compliance Designed for compliance with international norms for miniature circuit breakers suitable for residential, commercial, and industrial use

Technical Parameters Electrical Ratings Product Type: Molded Case Circuit Breaker (MCCB) Frame Rated Current (Iu): 160 A Number of Poles: 3 Trip Unit Type: Thermal-Magnetic (TMD) Adjustable Thermal Setting Range: 17.5 … 25 A Instantaneous Magnetic Setting (Ii): 300 A Rated Operational Voltage: up to 690 V AC / 500 V DC Rated Insulation Voltage (Ui): 1000 V Rated Impulse Withstand Voltage (Uimp): 8 kV Rated Frequency: 50 / 60 Hz Conventional Free-Air Thermal Current: 160 A Rated Service Short-Circuit Breaking Capacity (Ics): 85 kA at 220-240 V AC 50 kA at 380-415 V AC 36 kA at 500 V AC 25 kA at 525 V AC 12 kA at 690 V AC Rated Ultimate Short-Circuit Breaking Capacity (Icu): Same as Ics for corresponding voltages Short-Circuit Performance Level: S Mechanical & Installation Mounting Type: Fixed Terminal Connection: Front terminals with bolt/lug type connections Recommended Tightening Torque: ~6 N·m Connecting Capacity: Compatible with busbar up to 32.5 … 100 mm² Electrical Durability: ~8000 operations Mechanical Durability: ~25,000 operations Environmental & Physical Operating Temperature: Standard industrial ambient range Standards Compliance: IEC 60947-2 series Compact Size: Typical MCCB form factor for panel and distribution use

Technical Parameters General Characteristics Product Type: Manual pistol-type handle / handle operator Model: OHY45J6 Application: Designed to operate manual switch-disconnectors with 6 mm shaft diameter Handle Style: Pistol handle Color: Red / Yellow Mechanical & Mounting Handle Length: 45 mm (approx. 2.6 inches) Shaft Compatibility: fits 6 mm square shaft Operator Type: Non-defeatable pistol handle with ON/OFF (I-0) indication Mounting: Front panel mount via rear screw fixing for double insulation Protection & Safety Degree of Protection: IP65 (dust tight, water jet protected) NEMA Rating: NEMA 1, NEMA 3R, NEMA 12 environments Padlockable: Yes, accepts padlocks in OFF position for lockout/tagout procedures Insulation: Double insulation design (no exposed mounting screws on front) Physical Data Approx. Width: 78 mm Approx. Height: 66 mm Approx. Length: 45 mm Net Weight: ~0.13–0.30 kg (depending on market packaging)

Technical Parameters Electrical Ratings Type: Electronic overload relay Number of Poles: 3 Current Setting Range: 5.7 to 18.9 A Trip Class Options: Class 10E, Class 20E, Class 30E Auxiliary Contact Configuration: 1 NO (signal) + 1 NC (trip) Rated Operational Current: up to 18.9 A Rated Insulation Voltage (Ui): 690 V AC Rated Operational Voltage: up to 690 V AC Rated Impulse Withstand Voltage (Uimp): 6 kV Frequency: 50/60 Hz Protection & Performance Motor Protection: Overload protection with phase failure detection Reset Function: Automatic and/or manual reset options Temperature Compensation: Included for accurate trip behavior across temperature range Trip-Free Mechanism: Prevents weld-on in overload trip condition Test and Stop Functions: Built-in test and stop operation for safe maintenance Mechanical & Installation Mounting: Designed to be paired directly with compatible contactors Terminal Type: Screw terminals for main and auxiliary connections Protection Rating: IP20 Pollution Degree: 3 Dimensions: Approx. 74.6 mm (H) × 44.4 mm (W) × 57 mm (D) Weight: Approx. 0.15 kg Environmental Operating Ambient Temperature: –25°C to +70°C Storage Temperature: –50°C to +85°C Maximum Service Altitude: ~2000 m Standards & Compliance IEC/EN 60947-1 IEC/EN 60947-4-1 IEC/EN 60947-5-1 UL 60947-1 / UL 60947-4-1

Technical Parameters Electrical Ratings Contactor Type: 3-pole non-reversing contactor Main Contacts: 3 Normally Open (3 NO) Auxiliary Contacts: 1 Normally Open (1 NO) Rated Operational Current (AC-1): 28 A @ 690 V AC Rated Operational Current (AC-3): 12 A @ 220–240 V AC (typical for motor control) Rated Operational Voltage (Main Circuit): up to 690 V AC Control Voltage Range (Uc): AC: 24–60 V 50/60 Hz DC: 20–60 V DC Suitable Load Type: Motors, non-inductive and slightly inductive circuits Coil & Control Coil Type: Electronic interface accepting wide voltage range Low Holding Power: Designed for reduced coil consumption and direct PLC control Built-In Surge Protection: Minimizes need for external suppressors Mechanical & Connection Terminal Type: Screw connection for main, control and auxiliary circuits Mechanical Switching Frequency: Up to ~3600 cycles per hour Connecting Capacity (Examples): Flexible with ferrule: 0.75…6 mm² Rigid conductors: 1…6 mm² Wire Stripping Length (typical): ~10 mm Standards & Compliance IEC/EN 60947-1, IEC/EN 60947-4-1 compliance for industrial contactors UL/CSA ratings available for applicable configurations Environmental & Physical Operating Ambient Temperature: Approx. –25°C to +60°C Storage Temperature: Approx. –60°C to +80°C Altitude: Suitable for up to ~3000 m installation Rated Insulation Voltage (Ui): up to 690 V AC Rated Impulse Withstand Voltage (Uimp): 6 kV Compact Dimensions: Width ~45 mm, Depth ~77 mm, Height ~86 mm Approx. Weight: ~0.31 kg Typical Motor & Power Ratings Horsepower Ratings (UL/CSA): ~3 HP @ 220–240 V AC (three-phase) ~7.5 HP @ 440–480 V AC ~10 HP @ 550–600 V AC General Use Rating (UL/CSA): 28 A @ 600 V AC

Technical Parameters Electrical Ratings Rated Operational Current (Ie): Adjustable range 4–6.3 A Rated Operational Voltage: Up to 690 V AC Rated Insulation Voltage (Ui): 690 V Short-Circuit Breaking Capacity: approx. 50 kA @ 400 V AC Frequency: 50/60 Hz Trip Class: Class 10 (thermal overload protection) Motor Power Ratings (typical): ~1.5 HP at 220–240 V AC ~3 HP at 440–480 V AC ~5 HP at 500–600 V AC Protection & Function Protection Type: Manual motor starter with thermal overload and short-circuit reaction Phase Loss Sensitivity: Yes Disconnect Function: Built-in Overload Setting: Adjustable within 4 – 6.3 A range Trip Mechanism: Trip-free thermal overload Clear ON/OFF/TRIP Position Indication Mechanical & Installation Number of Poles: 3 Control Type: Rotary handle for manual operation (ON/OFF) Terminal Type: Screw or threaded connections Mounting: Panel or DIN-rail compatible (depending on installation) Compact Width: Approx. 45 mm Operating Cycles: Up to ~100,000 operations Environmental & Physical Data Operating Temperature: approx. −25 °C to +70 °C Degree of Protection: IP20 (front) Dimensions (typical): ~90 mm (H) × 45 mm (W) × ~85–86 mm (D) Mechanical Life: High operational durability (industry standard)