Technical Parameters Product Name: CM‑MSS.13S Thermistor Motor Protection Relay Device Type: Motor protection monitoring relay (thermistor/PTC based) Supply Voltage (Control Supply): 110–130 V AC 220–240 V AC Rated Frequency: 50/60 Hz Sensor Circuit: 1 sensing circuit for PTC thermistor input Output Contacts: 1 change‑over (SPDT) contact Output Contact Rating: Up to 250 V AC, 4 A (general control load) Connection Terminals: Screw terminal connections Mounting Style: DIN‑rail mountable for control cabinets Automatic Reset: Yes — relay resets automatically once the fault condition (overtemperature) clears Operating Temperature Range: Standard industrial range for control equipment Dimensions: Compact relay width approx. 22.5 mm, height ~85.6 mm, depth ~103.7 mm Weight: Around 0.155 kg Typical Applications: Motor overtemperature protection via PTC sensors Overheat monitoring and alarm signaling Control panel motor protection integration Industrial motor starter circuits requiring thermistor monitoring

Technical Parameters Product Name: OXP6X430 operating shaft Manufacturer: ABB Part / Model Number: OXP6X430 Mechanical Dimensions Shaft Cross‑Section: Square, 6 mm × 6 mm Length: 430 mm Weight: Approximately 0.11–0.14 kg (varies slightly by manufacturing tolerances) Construction Material: Robust metal shaft suited for mechanical actuation of external handles Shape: Square profile for positive engagement with pistol handle and mechanism Finish: Industrial grade suitable for electrical accessory use Compatibility Designed for use with switch disconnectors and pistol handle assemblies in multi‑frame switchgear Suitable for models that accept a 6 mm square shaft and extended handle accessories Typically paired with pistol grip handles and auxiliary components for manual switching Mounting & Use Application: Acts as the extension shaft transmitting user motion from an external pistol handle to the internal switch mechanism Installation: Inserted through a handle/shaft assembly and engaged with the switch disconnect mechanism Use Cases: Manual operation of disconnect switches and safety switches where remote or extended control actuation is needed Environmental & Operating Designed for use in industrial electrical panels and enclosures

Technical Parameters Product Name: AC Contactor Model / Type: C3SS1‑30R‑11 Number of Poles: • 3 main poles for switching the three‑phase load Auxiliary Contacts: • 1 auxiliary contact configured as 1 normally open (1 NO) Rated Operational Current: • Approximately 30 A for AC‑3 duty (typical motor control application) Rated Operational Voltage: • Up to 690 V AC Control Coil Voltage: • Designed for a specific coil voltage (e.g., 110 V AC, 220 V AC, 230 V AC, 440 V AC — depending on variant) Contact Configuration: • 3 main power contacts + 1 auxiliary contact Electrical Life: • Designed for high switching cycles in industrial duty applications Mechanical Life: • High durability for frequent operation Control Frequency: • Suitable for 50 / 60 Hz AC control circuits Connection / Terminals: • Screw terminals for line, load, auxiliary, and coil connections Mounting: • DIN‑rail or panel mounting in control cabinets Application Areas: • Motor control circuits • General AC load switching • Control panels, starters, and distribution boards • Automation and machinery control systems

Technical Parameters Product Name: ABB MT‑110B Modular Potentiometer Device Type: Potentiometer control operator Mounting Style: Panel mount (22 mm cutout) Actuator: Knob, black, non‑illuminated Bezel / Housing: Black plastic Resistance Value: 10 kΩ (10,000 ohms) Power Rating: 2 W (watts) Rotational Angle / Travel: Standard potentiometer rotational travel Contact Type: Variable resistor (potentiometer) Connection Style: Screw terminal or flat connector type for modular backblocks Series: MT series modular pilot device Operating Temperature Range: Typical industrial environmental range Environmental Protection: Suitable for use in industrial control panels; degree of protection depending on assembly and panel sealing Typical Use: Adjusting control signal levels in automated machinery, operator interfaces, and variable setpoint inputs Typical Applications Manual control of analog input signal setpoints Speed reference adjustment on motor drives with external potentiometer inputs Intensity or level adjustments in analog control circuits Part of modular pilot device assemblies in industrial control panels

Technical Parameters Product Name: MJS6‑40B Joystick actuator Device Type: Modular joystick actuator for industrial control panels Function: Directional control input (momentary) Control Action: Momentary / self-return to neutral when released Directional Positions: 4 directional commands (up, down, left, right) Mounting Hole Diameter: 22 mm panel cutout Actuator Collar / Bezel Material: Plastic bezel with frame for mounting support Operating Protection Rating: IP66/IP67/IP69K when correctly assembled with sealing accessories Color: Typically black actuator and bezel Contact Blocks: Not included; requires separate modular contact blocks to complete the switch function Electrical Ratings: Depends on installed contact blocks; suitable for industrial control circuits Mechanical Life: High durability for frequent actuation Typical Panel Use: Machinery control panels, operator interfaces, conveyor controls, manual directional inputs Typical Applications Manual directional control for motors and actuators Operator interface in industrial automation systems Panel-mounted joystick input for machine operation Custom control functions requiring momentary directional input

Technical Parameters Product Name: RC5‑2/440 surge suppressor Manufacturer: ABB Type: RC‑type surge suppressor accessory for contactor coils Operating Voltage Range: Designed for control circuits with AC supply between 250 V and 440 V AC, 50/60 Hz Function: Limits and attenuates overvoltage peaks and high‑frequency transient voltage spikes generated when contactor coils open Mounting Method: Clip‑on attachment to the contactor or contactor relay base (top or side depending on design) Typical Use Case: Installed with conventional AC contactors to protect control coil circuits and nearby electronics from inductive surges Suitable For Use With: Medium‑sized contactor ranges (e.g., A45 through A110 series and similar ABB contactors) Operating Temperature Range: Approximately –20 °C to +70 °C Construction: Compact module for direct attachment without increasing overall contactor dimensions Weight: Very light, suitable for auxiliary and control circuit applications Application Field: Industrial motor control panels, automation systems, control cabinets — wherever contactor coils are used under AC control conditions

Technical Parameters Product Name: CP2‑10R‑10 pushbutton Manufacturer: ABB Pushbutton Type: Compact, maintained pushbutton Contact Action: Maintained (latching) Actuator Style: Flush, red actuator Illumination: Non‑illuminated Bezel / Housing Material: Black plastic Contact Configuration: • 1 normally open contact (1 NO) • 0 normally closed contacts (0 NC) Rated Insulation Voltage: Up to 300 V Rated Operational Voltage: Up to 300 V AC/DC Electrical Ratings: • AC rating suitable for control circuit loads (typical AC‑15 rating up to around 1 A at 240 V) • DC rating suitable for control loads (typical DC‑13 around 0.3 A at 24 V) Connection Type: Screw clamp terminals Degree of Protection: • Front face rated for high ingress protection in panel use • Terminals protected to industrial safety standard levels Mechanical Durability: Designed for many cycles of operation (hundreds of thousands) Mounting Cutout Diameter: Standard 22 mm panel hole Operating Ambient Temperature: Approximately −25 °C to +70 °C Storage Temperature: Approximately −40 °C to +85 °C Typical Applications: • Control panel operator interfaces • Start/stop and control sequencing buttons • Human‑machine interface in industrial automation • Machinery control circuits

Technical Parameters Product Name: ABB CM‑MSE Thermistor Motor Protection Relay Product Type: Temperature monitoring / motor protection relay Sensor Type: PTC thermistor temperature input Output Contact: 1 normally open (1 N/O) contact Rated Switching Capacity: Up to 250 V AC at 4 A (typical) Control Supply Voltage Options: Common versions include 110–130 V AC, 220–240 V AC, and 24 V AC (model‑dependent) Output Contact Configuration: Single SPST (single pole, single throw) normally open Function: Monitors motor temperature via PTC sensors and triggers output on trip condition Automatic Reset: Yes (relay can reset automatically once normal conditions return) Mounting: DIN‑rail (35 mm) mounting for control cabinets Terminal Type: Screw terminals for power and sensor connections Dimensions (approximate): Width ~22.5 mm, Height ~78 mm, Depth ~78.5 mm Housing Protection: Standard industrial enclosure (IP20 at terminals) Operating Temperature Range: Approximately –20 °C to +60 °C Connection Wire Size: Supports typical industrial wire sizes (stranded with ferrules or solid) Weight: Around 100–120 g Standards & Compliance: Designed to meet relevant IEC/EN standards for monitoring relays and immunity/EMC requirements Typical Applications: • Overtemperature protection for motors with PTC sensors • Motor control panels and automation systems • Industrial machinery where thermal monitoring and motor protection are needed

Technical Parameters Product Name: ABB MP3-30G Product Type: Momentary Pushbutton Switch Actuator Style: Extended head design, green color Illumination: Non-illuminated Modular System: Part of ABB’s modular pilot device range Bezel Material: Chrome metal bezel Mounting Hole Diameter: 22 mm panel cut-out Contact Block: Not included (requires separate contact block if needed) Mechanical Durability: Designed for millions of operations (approx. 2 million typical) Operating Temperature Range: –25 °C to +70 °C Protection Ratings: Front face rated to IP66; terminals rated to IP20 Construction: Durable plastic/metal hybrid suitable for industrial control panels Typical Use: Control panel pushbutton input for machinery control, start/stop functions, and status inputs

Technical Parameters Product Name: ABB PSKP-1 Product Type: Soft Starter Keypad / User Interface Module Function: Operator interface for soft starter control and configuration Compatible With: ABB soft starters (PSTX / PST / PSTB series–generally for models like PST30…300 and PSTB370…1050) Control Interface: Connects to compatible soft starter via keypad communication port Display/Controls: Integrated keypad buttons for parameter input and navigation Mounting: Flush or panel mounting on soft starter housing or control panel Use Case: Local control and parameter setting of soft starter functions including start/stop commands, parameter entry, display of status and fault codes Environmental Suitability: Suitable for industrial cabinet environments when mounted on the appropriate panel cut-out Weight: Very lightweight (approximately several grams) Typical Dimensions: Compact form factor appropriate for panel mounting Application: Industrial motor control applications where a soft starter is used and local operator interface is required

Technical Parameters Product Type: AC contactor Model / Series: A2X32-30-10 (also referenced as AX32-30-10) Number of Poles: 3 main poles Auxiliary Contacts: 1 auxiliary contact (normally open) Rated Operational Current: ~32 A under AC-3 duty (motor control) Rated Operational Voltage: Up to 690 V AC Control Coil Frequency: 50/60 Hz Design: Block type AC contactor with screw terminals Main Application: Control and switching of three-phase motors and general power circuits Mechanical Design: Modular contactor design suitable for control panels

Technical Parameters Product Type: Low-voltage protective fuse (cylindrical fuse) Model / Type: OFAFC000GG40 Rated Current: 40 A Utilization Category: gG (general purpose, full range protection) Rated Voltage: 500 V AC (typical for this family of fuses) Breaking Capacity: High interrupting capacity suitable for industrial circuits Standards Compliance: IEC 60269 series for low-voltage fuses Construction: Cylindrical enclosed fuse element for clip or fuse holder mounting Application: Overcurrent and short-circuit protection in low-voltage electrical distribution and motor circuits