Technical Parameters Mechanical Number of Positions: 2 maintained fixed positions (typically A and C). Handle Type: Short red handle/knob for compact panel mounting. Operator Type: Maintained — stays in the selected position until manually switched again. Mounting: Standard 22 mm panel cut‑out for control devices. Housing Material: Durable black plastic. Contact Blocks: Not included — requires separate modular contact block(s) to provide electrical switching functionality. Mechanical Durability: High mechanical life for frequent use. Environmental & Protection Operating Temperature Range: Approx. –25 °C to +70 °C. Storage Temperature Range: Approx. –40 °C to +85 °C. Front Protection Rating: Designed for dust and splash resistance when installed (e.g., front panel up to high IP rating). Terminal Protection: Basic protection at terminals with appropriate enclosure installation. Physical Dimensions Width: ~48 mm (operator body). Height: ~30 mm. Depth: ~55 mm. Weight: Approx. 0.024 kg. Typical Applications Mode selection in control panels (e.g., On/Off, Auto/Manual). Operator interfaces for industrial automation equipment. Human‑machine interface (HMI) logic selection in PLC and relay systems. Situations requiring a simple maintained two‑position control with modular construction.

Key Features Type: Single‑pole miniature circuit breaker (MCB). Trip Curve: B‑characteristic — trips quickly on overcurrents, suitable for protection of lighting, power outlets, and general circuits. Installation: DIN‑rail mounted design for compact control panels and distribution boards. Compact Size: Slim 17.5 mm width (1 modular unit) for space‑efficient installation. Toggle Actuator: Manual ON/OFF switching with clear position indication (ON/OFF marking). Safety: Finger‑safe or touch‑protected terminals when installed in enclosure. Electrical Ratings Rated Current: 10 A — designed to protect a circuit with a nominal load current up to 10 amps. Rated Operational Voltage: Suitable for 230/400 VAC control and distribution systems at 50 / 60 Hz. Control Voltage Range: Compatible across low AC/DC voltages into typical mains use (e.g., ~12 V up to 253 VAC). Tripping Mechanism: Thermal‑magnetic — provides overload protection (thermal) and short‑circuit protection (magnetic). Interrupting Capacity: Designed to interrupt faults up to several kiloamperes, providing reliable breaking performance in typical building circuits. Rated Insulation Voltage: Suited for standard low‑voltage system insulation requirements. Rated Impulse Withstand Voltage: Withstands standard electrical impulse levels used in low‑voltage protective device testing. Mechanical & Environmental Number of Poles: 1. Operating Temperature Range: Designed to operate reliably in typical panel environments (approx. –25 °C to +55 °C). Storage Temperature: Broader storage range for warehouse handling. Durability: Designed for a high number of electrical and mechanical cycles, supporting long service life. Physical & Installation Width: ~17.5 mm (1 module wide). Height: ~88 mm. Depth: ~69 mm. Mounting: DIN‑rail mounting (TH35 rail), accepted in control and distribution panels. Terminals: Screw terminals for solid and stranded conductors; suitable for common wiring sizes used in branch circuits. Typical Applications Circuit protection in residential distribution boards. Protection of lighting and small power circuits. Supplementary protection in control panels and industrial installations. General overload and short‑circuit protection for building wiring systems.

Technical Parameters Electrical Rated control supply voltage: 220 V DC Contact configuration: 4 changeover contacts (4 C/O — SPDT) Rated switching voltage: Up to 250 V AC Rated current per contact: Up to 6 A Operational current examples: AC circuits up to 6 A at ~230 V AC Control circuit switching at lower voltages Insulation: Designed for typical industrial control circuit voltages Contact indicator: Integrated LED shows coil energization Mechanical & Environmental Mounting: Pluggable into CR‑M series socket with snap‑on DIN‑rail installation (via socket) Test / manual actuation: Built‑in test button for manual contact actuation and locking Operating temperature range: –40 °C to +70 °C (approx.) Storage temperature range: –40 °C to +85 °C (approx.) Protection: Basic enclosure protection around the relay body (typically IP40 when plugged in/on socket) Physical Dimensions Width: Approx. 21.2 mm Height: Approx. 35.6 mm Depth: Approx. 27.5 mm Weight: ~0.033 kg Typical Applications Interface relay between control logic (e.g., PLC outputs) and field devices Switching and isolation of multiple circuits from a common control signal Industrial automation, machine control panels, and relay logic systems Applications requiring visual indication of relay status and easy manual testing

Key Features Emergency Stop Function: Designed to provide a reliable manual emergency stop input in control systems. Actuation: Large 40 mm red mushroom head for easy and quick activation. Release Mechanism: Twist‑to‑release — button stays engaged until released by twist. Contact Configuration: 1 Normally Open (NO) + 1 Normally Closed (NC) auxiliary contacts. Range: Part of ABB’s compact pilot device series — minimal installation footprint. Non‑Illuminated: No built‑in lighting — simple mechanical design. Terminals: Screw‑type terminals for secure wiring connection. Panel Mounting: Fits standard 22 mm panel cut‑out for control devices. Electrical Ratings Rated Operational Voltage: Suitable for a wide range of control voltages up to typical industrial values (e.g., 24 V to 300 V AC/DC). Current Rating: Designed to carry control circuit currents — up to around 10 A at 250 VAC/VDC in typical configurations. Contact Type: Combination of NO and NC contacts suitable for both signaling and circuit interruption in safety circuits. Mechanical & Environmental Operating Temperature: Approximately −25 °C to +70 °C. Storage Temperature: Approximately −40 °C to +85 °C. Mechanical Durability: Designed for high usability with a substantial number of mechanical cycles. Protection Ratings: Front Panel: High degree of protection against dust, water jets and high‑pressure wash (e.g., IP66 / IP67 / IP69K rated front). Terminals: Protection rating at terminals typically IP20.

Technical Parameters Timing Operation Mode: OFF‑delay timing — delay occurs after control voltage is removed. Time Range: Adjustable delay typically from 0.1 seconds up to 100 seconds. Electrical Control Voltage: Operates on 24 to 240 V AC or DC control supply. Contact Configuration: Includes both a normally open (NO) and normally closed (NC) auxiliary contact. Rated Current (Approx): Suitable for control duty — typical ratings include multiple amperes at lower and higher voltages. Rated Operational Voltage: Designed for control circuit voltages up to the specified range. Connection Type: Screw terminal connections for secure wiring. Environmental & Mechanical Operating Temperature: Around –25 °C to +70 °C. Storage Temperature: Around –40 °C to +80 °C. Protection: Basic enclosure protection (typically IP20) at auxiliary terminals; front panel parts are protected when installed. Mounting: Direct front connection to compatible contactor or relay without additional wiring. Physical Dimensions Relatively compact form factor suitable for modern control cabinets, with typical dimensions around 43 mm (W) × 67.7 mm (D) × 41.6 mm (H). Typical Applications Delayed OFF functions in motor control and automation systems. Timing interlocks for safety or sequencing in industrial cabinets. Front‑mounted timing solutions for contactor control without standalone timers. Ideal wherever controlled shut‑off delays are needed after power removal.

Technical Parameters Electrical Ratings Rated operational voltage: Up to 300 V AC/DC. Contacts: 2 normally open + 1 normally closed (2NO + 1NC). Current ratings: Typical control circuit currents suitable (e.g., 1 A @ ~230 VAC, smaller DC currents). Rated insulation voltage: Typical low‑voltage switch class. Rated impulse withstand voltage: Designed to IEC/EN low‑voltage standards. Mechanical & Environmental Handle type: Short rotary handle. Number of positions: 3 maintained positions. Mechanical durability: Designed for many operational cycles. Operating temperature: Approx. –25 °C to +70 °C. Storage temperature: Approx. –40 °C to +85 °C. Degree of front protection: High dust and water resistance when properly installed (front up to IP66/IP67/IP69K). Terminal protection: Basic IP20 at terminals when installed. Physical & Installation Panel cut‑out: Standard 22 mm industrial mount. Mounting: Snap‑on panel installation for quick assembly. Bezel material: Chrome metal with black handle. Terminal type: Screw terminals. Typical Applications Mode selectors (e.g., Off/Auto/Manual) in industrial control cabinets. Operator interfaces for machines, conveyors, and equipment. Multi‑position control inputs for PLCs and relay systems. General purpose selector for control logic panels.

Technical Parameters Electrical Rated operational voltage: Up to 300 V AC/DC. Contacts: 2 normally open (2 NO). Mechanical Positions: Three fixed positions with return action from C to B. Panel cut‑out: 22 mm standard industrial diameter. Terminal type: Screw terminals. Handle type: Short handle for compact panel mounting. Environmental & Protection Operating temperature: –25 °C to +70 °C. Storage temperature: –40 °C to +85 °C. Front protection rating: IP66 / IP67 / IP69K (when properly installed). Terminal protection: IP20. Mechanical durability: Designed for long operational life. Physical Dimensions Width: ~30 mm Height: ~30 mm Depth: ~72 mm Weight: ~0.032 kg Typical Applications Mode selection in industrial control panels (e.g., Auto/Off/Manual). Operator interfaces for machinery and process equipment. Multi‑position control for system functions.

Technical Parameters Electrical Ratings Rated Operational Voltage: Suitable for control circuits up to typical industrial voltages (e.g., 24 to 240 V AC/DC). Current Ratings: ~1 A at 220–240 VAC ~1.5 A at 24–127 VAC ~0.2 A at 125 VDC ~0.3 A at 24 VDC Mechanical & Environmental Positions: 3 maintained fixed positions (A, B, C). Mechanical Durability: Designed for significant operation cycles (approx. hundreds of thousands of mechanical operations). Operating Temperature Range: Approximately –25 °C to +70 °C Storage Temperature Range: Approximately –40 °C to +85 °C Degree of Protection: Front panel protections rated IP66, IP67 and IP69K (when properly installed), terminals typically IP20. Physical & Installation Mounting Hole / Panel Cutout: Standard 22 mm panel cut‑out for industrial controls. Handle / Actuator: Short black rotary handle for easy selection. Bezel Material: Chrome metal front ring for durability and corrosion resistance. Connection Type: Terminals designed for screw connections. Typical Applications Operator control panels for industrial machines. Mode selectors (e.g., Auto/Manual/Off) in automation systems. Pilot devices in manufacturing control cabinets. Multi‑position control interfaces where a maintained selection is required.

Technical Parameters Physical & Mechanical Panel cut‑out: 22 mm standard mounting hole. Dimensions (approx.): 29 mm (W) × 29 mm (H) × 33 mm (D). Weight: ~0.012 kg. Mechanical durability: Up to 2 million operations. Bezel/housing: Black plastic. Environmental Operating temperature: –25 °C to +70 °C. Storage temperature: –40 °C to +85 °C. Protection & Standards Front protection rating: IP66 — dust tight and protected against powerful water jets (front panel). Terminal protection: Typically IP20 (terminals not protected without proper blocks). NEMA enclosure compatibility: Type 1, 3R, 4, 4X, 12, 13 (when assembled appropriately). Standards compliance: CE, RoHS.

Technical Parameters Electrical Ratings Rated insulation voltage (Ui): 300 V Rated impulse withstand voltage (Uimp): 6 kV Rated operational voltage: Up to 300 V AC/DC AC‑15 current rating: 1 A at 240 V DC‑13 current rating: 0.3 A @ 24 V DC, 0.2 A @ 125 V DC Maximum power loss: Approx. 5 W Mechanical & Environmental Operating temperature: –25 °C to +70 °C Storage temperature: –40 °C to +85 °C Mechanical durability: ~0.5 million operations Protection & Installation Front protection rating: IP66, IP67, IP69K (front only) Terminal protection: IP20 Connection type: Screw clamp terminals Wire stripping length: ~6 mm Tightening torque: ~0.8 N·m Connecting capacity: solid & ferrule‑terminated wires 0.5–1.5 mm² Physical Dimensions Width: ~30 mm Height: ~30 mm Depth / Length: ~55 mm Weight: ~22 g Typical Applications Industrial machine control panels PLC operator interfaces Equipment on/off or reset buttons Control circuits requiring a compact momentary push action

Technical Parameters Product Name: CP9‑1087 Pushbutton Device Type: Flush pushbutton switch (pilot operator) Series: CP9 compact pilot devices Actuator Color: Red Illumination: Non‑illuminated Actuator Style: Flush, low‑profile button Bezel / Housing Material: Black plastic Contact Configuration: Two changeover contacts (1 NO + 1 NC) Contact Operation: Momentary or maintained based on variant (most common is momentary) Mounting Hole Diameter: Standard 22 mm panel cutout Rated Insulation Voltage: Up to 300 V Rated Operational Voltage: Up to 300 V AC/DC (control circuits) Electrical Rating: Suitable for control and signaling circuits (low current) Connection Terminals: Screw clamp terminals or modular accessory blocks Protection Rating: Front panel rated to IP66/IP67 when correctly installed; terminals rated to industrial standard (IP20) Mechanical Durability: Designed for many actuation cycles typical of operator pushbuttons Operating Temperature Range: Standard industrial environments Typical Applications: Ideal for STOP or control command functions in industrial automation panels, operator control stations, and electrical enclosures

Technical Parameters Product Name: ABB S1‑M1‑25 Power Infeed / Feeder Block Device Type: 3‑phase feeder terminal block accessory Part / Model Number: S1‑M1‑25 Electrical Ratings: Rated Operational Voltage (AC): Up to 690 V Rated Operational Voltage (DC): Up to 250 V Rated Operational Current: 65 A for three‑phase connection Poles: Number of Poles: 3 (three phase) Connection & Terminals: Terminal Type: Screw terminals Cable Cross‑Section Capacity: • Rigid cables: up to 25 mm² • Flexible cables with ferrules: up to ~16 mm² Tightening Torque (typical): Appropriate torque for secure screw connection Wire Strip Length: Standard for feeder wiring Mechanical & Physical: Degree of Protection: IP20 (terminals and body) Mounting Form: Flat design for direct accessory connection Dimensions: Approx. 38 mm (height) × 44 mm (width) × 25.5 mm (depth) Weight: Approx. 0.038 kg (lightweight accessory) Standards & Suitability: Designed to interface with manual motor starters and compatible with standard industrial protection and distribution assemblies Suitable for solid core and stranded conductors with appropriate cable preparation Operates in typical industrial ambient conditions (panel enclosures and electrical cabinets)