Key Features Type: Illuminated modular lamp block with integrated LED. Color: Green illumination — ideal for status indication. Mounting Style: Front‑mount for pilot device panels. Compatibility: Designed to be used with modular pilot devices such as pushbuttons, selectors, indicators, and joystick series. Indicator: Bright LED for reliable visual feedback. Electrical Ratings Rated Operational Voltage: 24 V AC/DC control supply. Current Consumption: Approximately 9–10 mA at rated voltage (characteristic of the integrated LED). LED Type: Integrated LED — no separate lamp needed. Mechanical & Environmental Housing and Terminals: Screw clamp terminals for secure wiring connections. Operating Temperature Range: Designed for industrial ambient conditions. Storage Temperature Range: Suitable for typical control panel storage conditions. Protection: Touch‑protected terminals when installed in an enclosure. Physical Dimensions Width: ~44 mm Height (front): ~10 mm Depth: ~35 mm Weight: Lightweight module suitable for compact panel designs. Typical Applications Visual status indicator in industrial control panels. Signal indication for machine automation systems. Feedback light for pushbuttons, selector switches, and other pilot devices. Human‑machine interface (HMI) panels requiring clear visual signals.

Key Features Single‑pole changeover output (SPDT) for versatile switching functions. Compatible with 24 V AC/DC control voltage for flexible control inputs. Compact design for DIN‑rail mounting in control panels. Spring terminals for secure and reliable electrical connections. Clear mechanical separation of control and load circuits for safety. Slim width saves space in automation cabinets. Electrical Ratings Rated Control Supply Voltage: 24 V AC or DC (control coil). Output Contact Configuration: 1 changeover (1 C/O / SPDT). Rated Output Voltage: Up to 250 V AC. Rated Current: 6 A at 250 V AC. Operational Current Categories: AC‑12: ~6 A at 230 V AC DC‑12: ~6 A at 24 V DC DC‑13: ~1 A at 24 V DC (for inductive loads). Electrical Isolation: Full isolation between control input and switched output. Mechanical & Installation Terminal Type: Spring‑loaded terminals for flexible and rigid conductors (up to ~2.5 mm² / 14 AWG). Mounting: DIN‑rail (TH35‑7.5) clip‑on installation for quick panel setup. Wire Stripping Length: ~7 mm. Tightening Torque: Approx. 0.5 N·m for terminal screws. Protection Rating at Terminals: IP20 touch protection when installed in enclosure. Environmental Operating Temperature Range: Approximately –40 °C to +70 °C ambient. Storage Temperature Range: Moderate storage range suitable for warehouse conditions. Designed for industrial environments where temperature and vibration vary within standard control panel ratings. Physical Dimensions Width: Approx. 6.2 mm — very slim module. Height: Approx. 76.6 mm. Depth (Length): Approx. 94.7 mm. Weight: Around 0.03 kg — lightweight and compact. Typical Applications Electrical isolation and amplification between control logic and field devices. Switching control signals to actuators, indicators, contactors, or other loads. Panel‑mounted automation systems where board space is limited. Control circuits requiring small footprint relays with reliable switching.

Technical Parameters Mechanical Shaft Fit: 6 mm square shaft interface. Handle Type: Pistol grip for easy manual operation. Length: 45 mm approximate handle length. Mounting Method: Back screw fixing — improves insulation and appearance. Environmental Protection Rating: Front and handle rated for IP65 (dust tight and protected against low‑pressure water jets). Enclosure Compatibility: Suitable for use in enclosures rated NEMA 1, 3R, and 12, offering protection against dust, rain, and splash conditions when properly installed. Safety & Locking Padlock Capability: Accepts up to three padlocks in the OFF position for safety lockout/tagout procedures. Door Interlock: Provides interlock with enclosure door when the switch is ON, enhancing safety in panel access control. Physical Color: Black. Finish: Durable industrial surface suitable for frequent use. Typical Applications Manual isolation of power circuits on disconnect switches and load‑break switches. Operator control for safety disconnects in industrial panels. Mechanically‑interlocked panel doors for maintenance safety. Retrofitting or upgrading handles on compatible ABB switchgear hardware.

Key Features 2‑Pole Isolator: Disconnects both line and neutral (or two phases) in a circuit. Rated Current: 40 A, suitable for moderate load currents. Manual Operation: Simple toggle or handle for on/off isolation. Compact DIN‑rail Mounting: Designed for easy installation in standard control panels or distribution boards. Contact Position Indicator: Shows clearly whether the switch is ON or OFF. Modular Design: Compatible with System Pro M Compact series accessories and mounting systems. Electrical Ratings Rated Operational Current: 40 A continuous capacity. Rated Operational Voltage: Up to 440 V AC and 125 V DC typical for low‑voltage power distribution. Operational Frequency: Suitable for 50/60 Hz systems. Rated Impulse Withstand Voltage: Designed for several kilovolts protection against transient voltages. Provides safe isolation for load and control circuits within its voltage and current ratings. Mechanical & Durability Number of Poles: 2 (double‑pole) for full circuit isolation. Electrical Endurance: Built for repeated make/break operations. Mechanical Endurance: Designed for frequent use in control and distribution applications. Manual Actuation: Engaging handle toggles between ON and OFF. Environmental Operating Temperature Range: Suitable for typical industrial ambient temperatures. Storage Temperature Range: Broad range to withstand shipping and storage conditions. Protection Rating: IP20 when installed inside an enclosure, providing safe touch protection at terminals. Physical & Installation Mounting: DIN‑rail TH35 mountable for easy panel integration. Compact Size: Fits standard industrial panel layouts and uses minimal space. Screw Terminals: Secure, reliable connection for solid and stranded wiring. Color / Handle: Typically a colored handle (e.g., red/grey) for visual differentiation in panels. Typical Applications Main isolation switch in control panels and sub‑distribution boards. Safety disconnect for machinery and equipment during maintenance. Power circuit isolation in commercial and industrial electrical systems. Integration with modular distribution systems where compact, reliable switching is required.

Key Features Timer Function: OFF‑delay (delay on break) — output remains energized for a set period after the control input is removed. Adjustable Time Ranges: Selectable timing from 0.05 seconds up to 300 hours, allowing flexible configuration for many applications. Output Contacts: Two changeover (SPDT) contacts — can switch two circuits or provide both NO and NC outputs. DIN‑Rail Mounting: Compact housing that clips onto standard TH35 DIN rails for easy panel installation. Status Indication: LED indicators show timing and output status. Screw Terminals: Secure screw‑type connections for reliable wiring. Electrical Ratings Control Supply Voltage: Wide range 24–48 V DC or 24–240 V AC, suitable for many control applications. Output Contacts Rating: Rated for up to 250 V AC switching. Typical current capacity around 3–4 A depending on AC/DC load. Contact Configuration: 2 SPDT (changeover) output contacts. Minimum Switching Capacity: Down to small signal levels (low‑voltage control). Mechanical & Environmental Mounting: Snap‑on DIN‑rail TH35 installation. Housing Width: Compact 22.5 mm, ideal for space‑efficient panels. Operating Temperature: Designed for typical industrial ambient temperatures. Storage Temperature: Broad range for shipping and storage conditions. Terminal Protection: Terminals protected within enclosure when mounted correctly. Physical Dimensions Width: Approx. 22.5 mm Height: Approx. 85–86 mm Depth: Approx. 103–104 mm Weight: Roughly 0.14 kg Typical Applications Control sequence timing in machines where delay after signal removal is needed. Safety or shutdown interlocks that require a controlled delay before de‑energizing circuits. Automation logic in panel boards, PLC interfaces, and relay logic systems.

Technical Parameters Mechanical Operator Type: Momentary double pushbutton. Actuator Style: Flush with extended lower portion for ease of use. Contacts Required: Contact blocks not included — must be added separately. Mounting Size: Typically fits a 22 mm panel cut‑out. Mechanical Durability: High cycle life suitable for frequent use. Actuator Colors: Green for the upper button and red for the lower button. Environmental Operating Temperature Range: Approximately –25 °C to +70 °C. Storage Temperature Range: Approximately –40 °C to +85 °C. Front Protection: High level of dust and water resistance when correctly mounted. Terminal Protection: Basic protection at terminals when enclosed. Physical Width: Approx. 54 mm. Height: Approx. 30 mm. Depth: Approx. 43 mm. Weight: Approx. 0.025 kg. Typical Applications Control panel Human‑Machine Interface (HMI) panels. Start/Stop or dual‑function inputs in industrial automation systems. PLC or relay logic control circuits requiring two discrete momentary inputs. Modular pilot device installations where control logic flexibility is needed.

Key Features 3‑pole switch disconnector for three‑phase circuits. Rated current: 32 A — supports moderate current loads. Manual operation via a toggle or handle actuator. DIN‑rail mountable for easy integration into control panels. Screw terminal connections for secure wiring. Compact design suited for System Pro M Compact installations. Contact position indicator showing ON/OFF condition. Electrical Ratings Rated operational voltage: Up to 440 V AC in three‑phase systems. Rated current: 32 A continuous load capacity. Designed to interrupt load currents when opening under rated conditions. Operating frequency compatible with 50 / 60 Hz systems. Suitable transient withstand and insulation levels for typical low‑voltage power circuits. Mechanical & Endurance Poles: 3 poles with associated contacts. Electrical endurance: Built for substantial cycling in switching applications. Mechanical endurance: Designed for long service life with numerous make/break operations. Terminal type: Screw clamp style for solid and stranded wiring. Environmental & Protection Operating temperature range: Typical industrial ambient range. Storage temperature range: Broad range to withstand transport and storage conditions. Protection rating (front and body): Basic IP20 touch protection at terminals when installed inside an enclosure. Contact state indicator: Clear ON/OFF position marking for operator safety. Physical & Installation Mounting type: DIN‑rail mountable (TH35 rail) for quick panel installation. Compact footprint: Saves space in distribution boards and control cabinets. Handle/Actuator: Manual control for disconnecting and reconnecting the circuit. Dimensions: Designed to fit standard industrial panel layouts. Typical Applications Main disconnect switch in motor control centers and control panels. Isolation device for three‑phase power circuits during maintenance. Safety disconnect in industrial and commercial electrical distribution. Integration with other System Pro M components for compact panel design.

Key Features 3‑Pole design: Enables switching of three phase main circuits or three separate poles. Compact construction: Space‑efficient design for control panels and motor starters. Auxiliary Contacts: Includes options for auxiliary contact blocks to extend functionality. Screw Terminals: Secure wiring with standard screw‑type connections. Wide Application: Suitable for motor control, lighting, and general power switching. Electrical Ratings Rated Control Circuit Voltage: Typical versions available for 220–230 V 50 Hz / 230–240 V 60 Hz AC. Rated Operational Voltage (Main Circuit): Up to 690 V AC. Rated Operational Current (AC‑3): 9 A at typical motor load duty. Rated Operational Current (AC‑1): Up to ~25 A for general resistive loads. Rated Insulation Voltage (Ui): ~1000 V AC. Rated Impulse Withstand Voltage (Uimp): High transient withstand capability. Contact Configuration: 3 main NO (normally open) contacts; auxiliary contact availability depends on variant. Coil & Performance Coil Voltage: Versions available in various AC coil voltages (e.g., 220–240 V AC). Coil Power Consumption: Designed for efficient operation with typical AC coil holding and pull‑in values. Operate / Release Times: Fast operation suitable for control applications with minimal delay. Mechanical & Durability Mechanical Life: Designed for many cycles of switching in industrial use. Electrical Life: Rated for continuous duty under normal load conditions. Mounting: Panel or DIN‑rail mounting depending on socket or accessory. Operating Temperature: Suitable for standard industrial ambient temperatures. Protection Rating: Terminal and body protection based on enclosure and installation. Physical & Installation Poles: 3 main poles. Terminal Type: Screw clamp style terminals for robust wiring. Dimensions & Weight: Compact form factor suitable for panels; lightweight construction. Typical Applications Motor starters in industrial automation systems. Switching of 3‑phase loads such as pumps, fans, and compressors. Control circuits requiring frequent switching and reliable performance. Power distribution and equipment control in manufacturing and process industries.

Technical Parameters Electrical Contact Blocks: Not included — must be added separately. Intended Control Voltage: Determined by the contact blocks and LED/lamp block selected. Insulation Rating: Designed to meet low‑voltage control circuit requirements. LED Voltage: Depends on the LED/lamp module used (sold separately). Mechanical / Environmental Function Mode: Maintained — pushbutton remains engaged until manually toggled. Mechanical Life: High cycle life suitable for frequent operation. Operating Temperature Range: Approximately –25 °C to +70 °C. Storage Temperature Range: Approximately –40 °C to +85 °C. Protection Rating (Front): High ingress protection (front panel) for dust and water resistance. Protection at Terminals: Basic terminal protection when properly mounted in enclosure. Physical Dimensions Width: ~29 mm Height: ~29 mm Depth: ~33 mm Weight: ~0.012 kg Panel Cut‑out: Standard 22 mm diameter hole. Typical Applications Human‑machine interfaces (HMIs) for industrial automation. Control panel operator stations requiring a maintained push input with visual indication. PLC or relay control circuits where illuminated status feedback is needed. Any application requiring reliable, modular pushbutton operation with flexible contact configurations.

Technical Parameters Mechanical Shaft Cross‑Section: Square, 6 mm × 6 mm. Shaft Length: 400 mm total length. Weight: Approximately 0.10–0.11 kg. Material: Robust metal construction (steel) for reliable mechanical performance. Design & Fitment End Style: Square shaft intended for pistol‑handle coupling at one end and switch input at the other. Mounting: Fits into compatible disconnect switch and pistol handle assemblies designed for a 6 mm square shaft. Usage: Manual operation only – extends reach for switch levers or handles. Environmental & Operational Operating Conditions: Suitable for typical industrial control environments where manual disconnection or switching is needed. Protection: As a mechanical accessory, its protection is dictated by the switch housing/enclosure it is installed into. Typical Applications Extending the reach of disconnect switch actuation in control panels. Use with pistol‑style handles on load or safety disconnect switches. Applications requiring remote mechanical actuation of switches from outside an enclosure or panel.

Technical Parameters Electrical Contact Configuration: 1 Normally Closed (NC) auxiliary contact — opens when actuated. Conventional Thermal Current (Ithe): Rated for up to 16 A under normal thermal conditions. Rated Operation Current (AC‑15, 230 V): Suitable for typical control duty currents. Rated Insulation Voltage: Suitable for low‑voltage control circuits (commonly up to ~690 V). Connection: Screw terminal connections for wiring. Mechanical & Installation Mounting Style: Side mounting on compatible disconnect or load switches. Housing: Compact block consistent with modular accessory design. Mechanical Durability: Designed for extended operational life in industrial environments. Physical Dimensions Approximate Size: ~40 mm (W) × ~30 mm (H) × ~11 mm (D). Weight: Lightweight, easy to mount on switchgear assemblies. Environmental Operating Temperature: Designed to function reliably within typical control panel temperature ranges. Storage Temperature: Wide range suitable for warehouse or installation environments. Protection: When installed correctly, terminals should be protected within the enclosure; block itself contributes to overall safety compliance. Typical Applications Adding auxiliary feedback or interlock functions to disconnect switches and load switches. Enabling control circuits to detect switch position changes (e.g., open/closed status). Integration into motor control centers, distribution panels, and industrial automation systems requiring auxiliary signalling. Expansion of control logic for safety interlocking and machine sequencing.

Technical Parameters Mechanical Number of Positions: 2 maintained fixed positions (typically A and C). Handle Type: Short red handle/knob for compact panel mounting. Operator Type: Maintained — stays in the selected position until manually switched again. Mounting: Standard 22 mm panel cut‑out for control devices. Housing Material: Durable black plastic. Contact Blocks: Not included — requires separate modular contact block(s) to provide electrical switching functionality. Mechanical Durability: High mechanical life for frequent use. Environmental & Protection Operating Temperature Range: Approx. –25 °C to +70 °C. Storage Temperature Range: Approx. –40 °C to +85 °C. Front Protection Rating: Designed for dust and splash resistance when installed (e.g., front panel up to high IP rating). Terminal Protection: Basic protection at terminals with appropriate enclosure installation. Physical Dimensions Width: ~48 mm (operator body). Height: ~30 mm. Depth: ~55 mm. Weight: Approx. 0.024 kg. Typical Applications Mode selection in control panels (e.g., On/Off, Auto/Manual). Operator interfaces for industrial automation equipment. Human‑machine interface (HMI) logic selection in PLC and relay systems. Situations requiring a simple maintained two‑position control with modular construction.