Technical Specifications Category Likely Specification Compatibility Designed for specific series of ABB PSR (Soft Starter Combination) or MMP (Modular Motor Protector) units. The exact host device model(s) must be verified. Function Type Most Likely: A communication interface module (e.g., for PROFIBUS DP-V1 or Modbus RTU). Alternatively: An application configuration module for a specific industry/load type. Physical Interface Standardized plug connector that mates with a slot on the host device. Status Indication May include LED indicators for power, communication activity, or module status. Power Supply Powered directly from the host device (typically 24V DC derived from the main control circuit). Environmental Rated for standard industrial panel environments (IP20). Certifications Inherits safety and EMC certifications from the host system (CE, UL, cUL). 4. Key Features & Purpose System Integration: Enables the motor starter or protector to communicate with higher-level automation systems (PLCs, DCS, SCADA). Quick Commissioning: Application modules allow for rapid setup by loading pre-optimized parameter sets for common motor-driven equipment. Modularity: Allows users to select and pay only for the required functionality, with the flexibility to upgrade later. Diagnostics: Communication modules often provide enhanced diagnostic data access from the network. 5. Common Applications This module is used as a critical interface or configuration tool within motor control centers (MCCs) and automated systems: Integration into PROFIBUS DP Networks: Connecting a soft starter or motor protector to a Siemens PLC or similar control system. Pump Station Control: Using an application module pre-configured for pump control logic (soft stop, pump cleaning cycle, alternation). Fan Control Systems: Applying optimized parameters for centrifugal fan loads.

Technical Specifications Category Likely Characteristics Physical Form Small, compact printed circuit board (PCB) assembly, possibly with a plastic housing or connector interface. Compatibility Dedicated to a specific series and model of a main ABB device. Communication (If applicable) If a communication module, it might support protocols like: • PROFIBUS DP • Modbus RTU • DeviceNet • EtherNet/IP Configuration (If applicable) If a configuration module, it preloads a set of parameters for a specific motor type (e.g., high-efficiency IE3) or application (e.g., pump, fan, conveyor). Power Likely powered directly from the host/base device (e.g., 24 V DC). Environmental Rating Designed for panel-mount (IP20) industrial environments. Certifications Inherits the main system's certifications (CE, UL, cUL).

Technical Specifications Category Likely Specification Input Voltage AC Input: Likely 110-120V AC or 220-240V AC, 50/60 Hz (single or wide range). DC Input: Possibly 110-240V DC (if it's a DC/DC converter). Output Voltage Most commonly 24 V DC for industrial control circuits. Output Current / Power Typically in the range of 2.5A to 10A (60W to 240W) for a power supply module. If an interface module, it handles signal-level currents. Protection Standard features include: Overload protection, Short-circuit protection, Overvoltage protection. Efficiency High efficiency (>85%) typical for modern switched-mode power supplies. Isolation Galvanic isolation between input and output. Cooling Convection cooling (no fan). Ambient Temperature 0°C to +55°C or +60°C for full rating. Safety & EMC Standards Compliant with IEC/EN 61131-2, CE marked, UL/cUL recognized. Connection Screw-clamp terminals for reliable wiring. Status Indication LED indicator(s) for power (ON) and fault conditions.

Technical Specifications Parameter Specification Product Code PSTX570-600-70 Series ABB PSTX Medium Voltage Soft Starters Rated Voltage 3300 V / 6000 V (selectable) Rated Current 570 A (continuous at 40°C) Starting Current Adjustable, typically 200% - 500% of motor Full Load Current (FLC) Motor Power Range Approx. 3000 - 5000 kW (dependent on voltage, motor power factor, and efficiency) Control Supply Voltage 110-120V AC or 220-240V AC, 50/60 Hz Starting Time Adjustable from 5 to 120 seconds Stopping Time Adjustable soft-stop (optional, 5 to 120 seconds) Cooling Method Forced air cooling (integrated high-capacity fans) Enclosure IP00 / Open Type (for installation in a customer/contractor-supplied floor-standing or wall-mounted cabinet) Ambient Temperature 0°C to +40°C (32°F to 104°F) for full rating; up to +50°C (122°F) with derating Altitude Up to 1000 m (3280 ft) without derating Standards & Approvals IEC, UL, CSA, CE; compliant with IEC 60947-4-2

Technical Specifications Parameter Specification Product Code PSTX72-600-70 Series ABB PSTX Medium Voltage Soft Starters Rated Voltage 3300 V / 6000 V (selectable) Rated Current 72 A (continuous at 40°C) Starting Current Adjustable, typically 200% - 450% of motor FLC Motor Power Range Approx. 400 - 630 kW (dependent on voltage & motor PF) Control Supply 110-120V AC or 220-240V AC, 50/60 Hz (configurable) Starting Time Adjustable, typically 5 - 60 seconds Stopping Time Adjustable soft-stop (optional) Cooling Method Natural convection or forced air (model dependent) Enclosure IP00 / Open Chassis (for cabinet installation) Ambient Temperature 0°C to +40°C (32°F to 104°F) for full rating Altitude Up to 1000 m (3280 ft) without derating Standards IEC, UL, CSA, CE compliant

Parameter Category Specification Detail Model Designation DS7-34DSX070N0-D Product Series ABB DS7 Drive System Configuration Type Single Axis Drive Module Rated Output Current 70 A (Continuous, typical) Peak Output Current 140 A (Typically 200% of rated for short duration) Supply Voltage 3-phase, 400 - 480 V AC (+10%/-15%), 50/60 Hz DC Link Voltage 510 - 720 V DC Output Power 34 kW (Approximate, dependent on motor and application) Control Technology High-performance digital servo control with vector technology Communication Interface Integrated digital drive bus (e.g., DriveBus, SERCOS, or Ethernet-based) Feedback System Support EnDat, Hiperface, Resolver, Sin/Cos 1Vpp Control Modes Torque, Speed, Position (CSP, CSV, CST) Switching Frequency Configurable, typically 4 - 16 kHz Protection Class IP20 (Chassis unit for cabinet installation) Cooling Method Forced air cooling Ambient Temperature 0 to +45°C (32 to 113°F) for full rating; up to +55°C (131°F) with derating Relative Humidity < 95% non-condensing Standards & Approvals CE, UL, cUL, RoHS, IEC 61800-3, IEC 61800-5-1

Technical Specifications Parameter Specification Product Code PSTX300-600-70 Series ABB PSTX Medium Voltage Soft Starters Rated Voltage 3300 V / 6000 V (switch-selectable) Rated Current 300 A (continuous at 40°C) Starting Current Adjustable, typically 200-500% of motor Full Load Current (FLC) Motor Power Range Approximately 1500 - 2500 kW (dependent on voltage, motor efficiency, and application) Control Supply Voltage 110-120V AC or 220-240V AC, 50/60 Hz (configurable) Starting Time Adjustable from 5 to 120 seconds Stopping Time Adjustable from 5 to 120 seconds (soft stop option) Pulse/Triggering Advanced digital firing control Cooling Method Forced air (integrated fan cooling) Enclosure IP00 / Open Type (for installation in a customer/contractor-supplied cabinet) Ambient Temperature 0°C to +40°C (32°F to 104°F) for full rating; up to +50°C (122°F) with derating Altitude Up to 1000 m (3280 ft) without derating Standards & Approvals IEC, UL, CSA, CE; compliant with relevant sections of IEC 60947-4-2

Technical Specifications: Parameter Specification Product Code PST105-600-70 Series ABB PST Medium Voltage Soft Starters Rated Voltage 3300 V / 6000 V (switch-selectable) Rated Current 105 A (continuous) Starting Current Adjustable, typically 200-400% of motor full load current Motor Power Range Approx. 500 - 800 kW (depending on voltage and motor characteristics) Control Voltage 110-120V AC or 220-240V AC (configurable) Cooling Method Natural convection or forced air (depending on configuration) Enclosure Typically IP00 or IP20 (cabinet-mounted) Starting Time Adjustable from 1 to 60 seconds Stopping Time Adjustable from 1 to 60 seconds (optional soft stop) Pulse Frequency Typically 400-800 Hz Ambient Temperature -10°C to +40°C (14°F to 104°F) for full rating Altitude Up to 1000 m (3280 ft) without derating Standards IEC, UL, CSA, CE compliant

Technical Specifications: Parameter Specification Product Code ACS880-01-105A-3 Series ABB ACS880 Industrial Drives Rated Power 75 kW / 100 HP Output Current 105 A (at 400V, continuous) Supply Voltage 3-phase, 380 - 415 V AC (-15%/+10%), 50/60 Hz Output Voltage 0 - Supply Voltage Output Frequency 0 - 500 Hz (standard), optional 1200 Hz Control Principle Direct Torque Control (DTC) or Scalar Control (V/Hz) Control Board Standard I/O board (INUXX11) included Enclosure IP00 / Open Type (for cabinet installation) Frame Size I4 Overload Capacity 110% continuous, 150% for 60 seconds, 200% for 2 seconds Cooling Method Air cooling with internal fans Ambient Temperature 0 to +40°C (32 to 104°F) without derating Up to +50°C (122°F) with derating Relative Humidity < 95% non-condensing Altitude Up to 1000 m (3280 ft) without derating 1% derating per 100 m above 1000 m Vibration 0.7 g (5-200 Hz) Standards & Approvals CE, cULus, RoHS, IEC 61800-3, IEC 61800-5-1, IEC 61800-5-2 (with safety options)

Technical Specifications: Parameter Specification Product Code ACS880-01-206A-3 Series ABB ACS880 Industrial Drives Rated Power 160 kW / 215 HP Output Current 206 A (at 400V, continuous) Supply Voltage 3-phase, 380 - 415 V AC (-15%/+10%), 50/60 Hz Output Voltage 0 - Supply Voltage Output Frequency 0 - 500 Hz (standard), up to 1200 Hz (optional) Control Principle Direct Torque Control (DTC) or Scalar Control selectable Control Board Standard I/O board included Enclosure IP00 / Open Chassis (cabinet-built module) Frame Size I6 Cooling Method Air cooling (internal fans) Ambient Temperature 0 to +40°C (32 to 104°F) without derating, up to +50°C (122°F) with derating Relative Humidity < 95% non-condensing Altitude Up to 1000 m (3280 ft) without derating Standards CE, cULus, RoHS, IEC 61800-3, IEC 61800-5-1

Parameter Category Specification Detail Model Designation ACS355-03U-01A9-4 Product Series ABB ACS355 General Purpose Micro Drive Rated Power 0.75 kW (1 HP) Output Current 1.9 A (at 400V, continuous duty) Supply Voltage 3-phase, 380 - 480 V AC (±10%), 50/60 Hz Control Method Scalar Control (V/Hz) with flux optimization Enclosure Rating IP20 / UL Type 1 (Open Chassis) Frame Size R1 Standard Features - Built-in Modbus RTU (RS-485) - 3 digital inputs, 1 analog input - 1 analog output, 1 relay output - Flying start - Automatic energy optimization - DC braking - IP20 protection 3. Option Module B063: Safe Torque Off (STO) Specification Details Function Safety function that prevents unexpected motor start-up Safety Standard Complies with EN/IEC 61800-5-2, EN ISO 13849-1, EN 62061 Safety Integrity Level SIL 3 according to IEC 61508, IEC 62061 Performance Level PL e according to ISO 13849-1 Safety Category Category 3 Description The B063 option provides two safe digital inputs for implementing the Safe Torque Off function. This safety function ensures that no torque-generating power is delivered to the motor, preventing unexpected start-up during maintenance or emergency situations. It meets strict international safety standards for machinery applications. 4. Option Module F278: I/O Extension Module Specification Details Module Type Digital and Analog I/O Extension Additional Inputs - 2 digital inputs (24V DC) - 1 analog input (0-10V/0-20mA selectable) Additional Outputs - 1 analog output (0-20mA/0-10V programmable) - 1 relay output (changeover contact, 250V AC/30V DC, 2A) Installation Pluggable module, mounts directly to the drive Description The F278 module extends the control capabilities of the base ACS355 drive by providing additional I/O points for more complex control scenarios. This is particularly useful when the base drive's I/O is insufficient for the application requirements. 5. Complete Package Specifications Aspect Combined Capabilities Total Digital Inputs 5 (3 base + 2 from F278) + 2 safe inputs (from B063) Total Analog Inputs 2 (1 base + 1 from F278) Total Analog Outputs 2 (1 base + 1 from F278) Total Relay Outputs 2 (1 base + 1 from F278) Safety Features SIL 3, PL e Safe Torque Off function Communication Built-in Modbus RTU (RS-485) Control Flexibility Enhanced with additional I/O for complex control sequences 6. Key Application Features Safety Integration: Safe Torque Off (STO): Enables safe maintenance and emergency stop functionality Dual-Channel Safety Inputs: Redundant safety circuit design Safety Monitoring: Continuous monitoring of safety circuits Enhanced Control Capabilities: Expanded I/O: Suitable for applications requiring multiple control signals Flexible Configuration: Additional inputs for sensors, switches, and safety devices Extended Outputs: Control of external devices, indicators, and auxiliary equipment

Technical Specifications: Parameter Category Specification Detail Model Designation ACS310-03E-25A4-4 Product Series ABB ACS310 General Purpose Drive Rated Power 11 kW (15 HP) Output Current 25.4 A (at 400V, continuous duty) Supply Voltage 3-phase, 380 - 480 V AC (±10%), 50/60 Hz Output Voltage 0 - Supply Voltage (Uin) Output Frequency Range 0.1 - 500 Hz Control Method Scalar Control (V/Hz) with selectable characteristic curves Control Performance - Speed control range: 1:40 - Speed accuracy: ±0.5% of max speed (20-50 Hz) - Starting torque: Up to 160% at 0.5 Hz - Overload capacity: 150% for 60s, 200% for 2s Enclosure Rating IP20 / UL Type 1 (Open Chassis) Physical Frame Size R4 Key Features - Application Macros: 5 pre-programmed configurations - Flying Start: Catches rotating motors - Energy Optimizer: Reduces motor losses - Built-in PID Controller: For process control - Automatic Restart: After fault or power loss - DC Braking: Standard feature - Motor Thermal Model: I²t protection with PTC option Input/Output Configuration Digital Inputs: 3 (24V DC, configurable) Analog Input: 1 (0-10V/0-20mA selectable) Analog Output: 1 (0-20mA/0-10V programmable) Relay Output: 1 (changeover, 250V AC/30V DC, 2A) Optional I/O: Expansion modules available Communication Interfaces Standard: - Modbus RTU (RS-485) Optional: - PROFIBUS DP - DeviceNet - CANopen (via plug-in adapters) Protection Features Motor Protection: - Thermal overload (I²t) - Stall prevention - Phase loss/imbalance - Earth fault Drive Protection: - Short circuit - Overcurrent - Overvoltage/Undervoltage - Heatsink overtemperature - IGBT protection Energy Efficiency - Power factor: >0.98 - Efficiency: >97% - ECO mode for light loads - Sleep/wake function Cooling System Forced air cooling with temperature-controlled fan Environmental Specifications Operating Temperature: -15°C to +50°C (derating above 40°C) Storage Temperature: -40°C to +70°C Humidity: <95% non-condensing Altitude: 0-1000m without derating Vibration: 0.7G (5-200 Hz) Electrical Standards - CE compliant - cULus listed - RoHS compliant - EN/IEC 61800-3 (EMC) Physical Dimensions Height: 247 mm Width: 140 mm Depth: 177 mm Weight: 3.2 kg