Technical Specifications Part Number / Model 1SDA092548R1 Product Type Molded Case Circuit Breaker (MCCB) Series / Family S2N / ABB Circuit Breaker Number of Poles 4 Poles (4P) Rated Current (In) 160 A Model Designation S2N160 R160 4P FFC+RC212V Trip Mechanism Thermal‑magnetic protection Frame / Housing Plastic casing for compact installation Rated Operational Voltage (Ue) Up to typical low‑voltage AC systems (e.g., 230/400 V AC) Application Overload and short‑circuit protection in distribution boards and panels Accessories May include auxiliary contacts or releases such as RC212V Mounting Panel / DIN‑rail compatible depending on enclosure Standards Compliance Designed to meet IEC and relevant low‑voltage circuit breaker standards

Technical Specifications Parameter Specification Part Number / Model 2CDS251001R0634 Product Name Miniature Circuit Breaker — S201‑C63 Series / Family ABB System pro M compact (S200) Configuration Single pole (1P) Tripping Characteristic Type C (general purpose) Rated Current (Iₙ) 63 A Rated Operational Voltage 230/400 V AC (IEC 60898‑1); 230 V AC (IEC 60947‑2) Rated Insulation Voltage (Uᵢ) 440 V Rated Impulse Withstand Voltage (Uᵢₘₚ) 4 kV (air altitude); higher values at sea level Operational Voltage Range 12–253 V AC; 12–72 V DC Rated Short‑Circuit Capacity (Icn) 6 kA (AC) Rated Ultimate Short‑Circuit Breaking Capacity (Icu) 10 kA at 230/400 V AC Rated Service Short‑Circuit Breaking Capacity (Ics) 7.5 kA (230 V AC) Energy Limitation Class Class 3 Overvoltage Category III Pollution Degree 3 Power Loss ~4.8 W per pole Frequency 50/60 Hz Degree of Protection IP20 Operating Ambient Temperature −25 °C to +55 °C Mounting DIN‑rail (TH35) Terminal Type Screw terminals with lifted cylindrical design Endurance Electrical ~10,000 cycles; Mechanical ~20,000 cycles Contact Position Indication Red (ON) / Green (OFF) Standards Compliance IEC/EN 60898‑1; IEC/EN 60947‑2; UL 1077 Accessories Bottom‑fitting auxiliary contacts possible

Technical Specifications Parameter Specification Part / Model AL26‑30‑10 24 V DC Contactor Product Type Power Contactor Series / Family ABB AL Series Coil Voltage (Rated Control Voltage) 24 V DC Main Contacts 3 normally open (3 NO) Auxiliary Contacts 1 normally open (1 NO) Rated Operational Voltage – Main Circuit up to 690 V AC Rated Operational Current AC‑1 (Ie) 45 A (690 V, 40 °C) / 40 A (55 °C) Rated Operational Current AC‑3 (Ie) ~26 A (220–440 V AC) / ~13 A (690 V AC) Rated Operational Power AC‑3 (Pe) up to 15 kW (440–500 V AC) / ~11 kW (380–690 V AC) Rated Making Capacity AC‑3 10 × Ie Rated Breaking Capacity AC‑3 8 × Ie Rated Operational Current DC‑13 (Ie) 6 A / 144 A (24 V DC) Conventional Free‑Air Thermal Current (Ith) 45 A Max Mechanical Switching Frequency ~3600 cycles/hour Max Electrical Switching Frequency AC‑1: ~600 cycles/hour; AC‑3: ~1200 cycles/hour Operate / Release Times Close: ~55 – 110 ms; Open: ~12 – 18 ms Terminal Type Screw terminals Rated Insulation Voltage (Ui) ~1000 V (IEC 60947‑4‑1) Rated Frequency (Main Circuit) 25 – 400 Hz Ambient Operating Temperature –40 °C to +55 °C Mechanical Durability High cycle life per IEC standards Mounting DIN‑rail / panel mounting capable Standards Compliance IEC/EN 60947‑4‑1, IEC/EN 60947‑5‑1 Weight (approx.) ~0.75 kg Dimensions (approx.) Width ~54 mm × Height ~90 mm × Depth ~110 mm

Technical Specifications Parameter Specification Part Number / Model 1SBL323001R8810 ABB Type / Code AL40‑30‑10 DC Contactor Coil Voltage 220 V DC Number of Poles 3 main poles (3 NO) Auxiliary Contacts 1 normally‑open (1 NO) Rated Operational Current – AC‑1 (Ie) 60 A at 690 V AC free‑air thermal current Rated Operational Current – AC‑3 (Ie) 37 A at 415 V AC Rated Operational Power (AC‑3) 18.5 kW at 400 V AC Control Coil Consumption ~3.5 W (low‑consumption DC coil) Rated Insulation Voltage (Ui) 1000 V Rated Short‑time Withstand Current (Icw) 400 A for 10 s Terminal Type Screw terminals Mounting Panel / DIN rail capable (block contactor design) Rated Frequency (Control) DC control Rated Frequency (Main) 25‑400 Hz Ambient Air Temperature –25 °C to +55 °C (operating) Product Class Block contactor per IEC 60947‑4‑1 Weight (approx.) 0.85 kg Product Range ABB AL Contactors

Technical Specifications Parameter Specification Product Manual Motor Starter Model / Part Number MS325‑16 Rated Operational Current (Ie) 16 A Setting Range (Overload Protection) 12.5 – 16 A Number of Poles 3 poles Rated Operational Voltage (Ue) up to 690 V AC and 440 V DC Rated Service Short‑Circuit Breaking Capacity (Ics) 100 kA at 230 V AC, 60 kA at 400 V AC, 40 kA at 440 V AC, 25 kA at 500 V AC, 4 kA at 690 V AC Rated Ultimate Short‑Circuit Breaking Capacity (Icu) Same as Ics Rated Instantaneous Short‑Circuit Current Setting (Ii) 240 A Rated Operational Power AC‑3 ~7.5 kW (400 V AC) Trip Class Class 10A Control / Handle Rotary ON/OFF handle with clear indication Functions Manual switching, overload protection, short‑circuit protection Disconnect Function Built‑in Temperature Compensation Yes Trip‑Free Mechanism Yes Poles in Series for Single‑Phase 3 poles can be used in series Auxiliary / Accessory Options Auxiliary contacts, signalling contacts, undervoltage release, shunt trip (optional) Enclosure Protection IP20 Operating Temperature Range –25 °C to +50 °C (typical) Mechanical Durability High cycle life (thousands of operations) Dimension (approx.) Width: 54 mm, Height: 87.5 mm, Depth: 75.5 mm Standards Compliance IEC/EN 60947‑4‑1 / IEC/EN 60947‑1 series

Technical Specification Parameter Specification Part / Model ABB XT1N160 TMD80‑800 FF 3P Product Type Molded Case Circuit Breaker (MCCB) Series / Family ABB Tmax XT Number of Poles 3‑pole (3P) Trip Unit Type Thermal‑magnetic (TMD), adjustable (80–800 A) Rated Current (I_n) 80 A Rated Uninterrupted Current (I_u) 160 A Operational Voltage (U_e) 690 V AC / 500 V DC Rated Insulation Voltage (U_i) 800 V Rated Impulse Withstand Voltage (U_imp) 8 kV Rated Ultimate Short‑Circuit Breaking Capacity (I_cu) up to 65 kA (at lower AC voltages) Rated Service Short‑Circuit Breaking Capacity (I_cs) up to 50 kA (at lower AC voltages) Rated Instantaneous Short‑Circuit Setting (I_i) 800 A Frequency 50/60 Hz Mounting Type Fixed installation (front terminals) Terminal Connection Front bolt connections Mechanical Durability ~25,000 operations Electrical Durability ~8,000 operations Power Loss per Pole ~4.8 W Standards Compliance IEC 60947‑2 Typical Use Power distribution protection in industrial/commercial installations

Technical Specifications Parameter Specification Part Number / Model 1SBL283001R8110 Product AL30‑30‑10 Power Contactor Contact Configuration 3 main poles + 1 auxiliary contact (1 NO) Rated Control / Coil Voltage 24 V DC Rated Operational Voltage (Main Circuit) up to 690 V AC Rated Operational Current AC‑3 (Ie) ~30–33 A (at 380–415 V AC) Rated Operational Current AC‑1 (Ie) ~55 A (at 690 V AC) Rated Operational Power AC‑3 (Pe) up to ~15 kW (at 380–415 V AC) Rated Breaking Capacity AC‑3 8 × Ie Auxiliary Contacts 1 Normally Open (1 NO) Max Switching Frequency up to ~1200 cycles/hour (AC‑3) Coil Consumption Low consumption DC coil (~3.5 W) Terminal Type Screw terminals Mounting DIN‑rail / Panel mount compatible Operating Frequency 50–60 Hz Rated Insulation Voltage (Ui) 1000 V (IEC) Rated Impulse Withstand Voltage (Uimp) 8 kV Ambient Temperature (Operating) –40 °C to +55 °C Degree of Protection IP20 Mechanical Life High mechanical durability typical for IEC 60947‑4‑1 block contactors Standards Compliance Designed to IEC 60947‑4‑1 and related industrial standards

Technical Specifications Parameter Specification Part / Model GSH202 AC‑D25/0.03 Product Type Residual Current Operated Circuit Breaker (RCD / RCCB) Number of Poles 2 poles (2P) Rated Current (In) 25 A Rated Residual Current (IΔn) 30 mA Residual Current Type AC‑D (AC sensitivity with enhanced response) Rated Operational Voltage (Ue) 230 V AC (typical for low‑voltage systems) Rated Insulation Voltage (Ui) 500 V Rated Impulse Withstand Voltage (Uimp) 4 kV Operating Frequency 50/60 Hz Tripping Characteristic Instantaneous residual current trip Mounting DIN‑rail mounting Terminal Type Screw terminals Protection Functions Earth leakage / residual current protection Applications Protection against earth leakage and shock hazards in AC circuits Standards Compliance Designed to meet residual current device standards for type AC/D protection Typical Dimensions Standard modular width (~2 modules) and DIN‑rail footprint Typical Use Cases Final circuit earth fault protection in residential and commercial panels

Technical Specifications Parameter Specification Part Number / Model 1SBL417001R7211 Series / Family AF Series (AF75‑30‑11) Product Type 3‑Pole Contactor (Control Unit) Coil Voltage 20 – 60 V DC Main Contact Configuration 3 poles (4 NO) Rated Contact Current 75 A (typical) Rated Operational Voltage (Main Circuit) up to 690 V AC Rated Power (AC‑3) ~37 kW at rated voltage Control Supply Type DC coil Operating Frequency DC control Auxiliary Contacts Integrated as per configuration (4 NO) Mounting DIN‑rail or panel mounting (screw terminals) Protection Class IP40 Ambient Temperature Range –40 °C to +70 °C Connection Type Screw terminals Function Motor and power circuit control

Technical Specifications Parameter Specification Part Number / Model 1SDA000174R1 Series / Family S1 / S1N Molded Case Circuit Breaker Product Type Automatic Circuit Breaker (Molded Case) Poles 3-pole (3P) Rated Current (In) 125 A Trip Unit Type Thermal-magnetic protection Rated Operational Voltage Typical low-voltage AC distribution (up to 480–690 V) Breaking / Interrupting Capacity High short-circuit breaking capability (specific ratings depend on variant) Terminal Connection Fixed terminals (front connection) Mounting Panel / switchgear installation Standards Compliance IEC/EN 60947-2 Application Protection of power distribution circuits, motors, feeders, and branch circuits Operation Manual toggle operator (lever)

Technical Specifications Parameter Specification Part Number / Model 2CSR255180R1164 Series / Type DS201 C16 A30 RCBO Product Category Residual Current Circuit Breaker with Overcurrent Protection Poles 1P + N Rated Current (In) 16 A Rated Residual Current Sensitivity (IΔn) 30 mA Rated Operational Voltage (Ue) 230 V AC Rated Frequency 50–60 Hz Residual Current Type Type A Tripping Characteristic C curve Rated Short‑Circuit Breaking Capacity (Icu) 10 kA Rated Service Short‑Circuit Breaking Capacity (Ics) 7.5 kA Rated Insulation Voltage (Ui) 500 V Rated Impulse Withstand Voltage (Uimp) 4 kV Overvoltage Category III Pollution Degree 2 Number of Modular Widths 2 modules Contact Position Indication Red ON / Green OFF Fault Indication Blue flag on toggle Mounting DIN‑rail (35 mm) Terminal Type Screw terminals Electrical Endurance ~10,000 cycles Mechanical Endurance ~20,000 cycles Operating Temperature −25 °C to +55 °C Degree of Protection IP20 / IP40 Connection Capacity Solid: 0.75–25 mm², Stranded/Ferruled: 0.75–16 mm² Standards Compliance IEC/EN 61009‑1, IEC/EN 61009‑2‑1 Color / Housing Black toggle, grey body Weight (approx.) ~0.20 kg Dimensions (W×H×D) ~35 mm × 85 mm × 69 mm

Technical Specifications Parameter Specification Part Number / Model AF265‑30‑11‑13 Product Type 3‑Phase Contactor Series AF Series Control / Coil Voltage 100–250 V AC/DC wide‑range coil Poles 3 Main Poles (3NO) Auxiliary Contacts 1 NO + 1 NC Rated Current 265 A (AC‑3) typical Rated Operational Voltage (Main Circuit) up to 1000 V (IEC) Impulse Withstand Voltage 8 kV (Main Circuit) Insulation Voltage 1000 V (IEC 60947‑4‑1) Mounting Type DIN rail / Panel mount Operating Temperature approx. −40 °C to +70 °C Mechanical Durability ~5,000,000 operations Auxiliary Contact Configuration 1NO + 1NC Standards Compliance IEC/EN 60947‑4‑1, UL, CSA Features Built‑in surge suppression, low coil power consumption, energy‑efficient electronic coil design Typical Applications Motor control, power switching, industrial automation, HVAC, pumps & compressors