Technical Parameters Parameter Specification Manufacturer Part Number OXPW1-480V Product Line ABB XSeries (PLC / Smart Relay System) Module Type Power Supply Module (PSU) Input Voltage 480V AC, single-phase (+10%, -15%). Frequency: 50/60 Hz. Input Current Approximately 0.2A at 480V AC (typical). Output Voltage 24V DC (regulated), supplied to the connected XSeries CPU and expansion I/O modules via the backplane connector. Output Current / Power Typically supplies up to ~1.0A at 24V DC (≈ 24W) to the system. Note: This is shared between CPU and all connected I/O modules. Inrush Current Limiting Yes, to prevent nuisance tripping of the upstream fuse/circuit breaker. Internal Protection Input Fuse: Integrated, user-replaceable fuse (e.g., 2A, 250V, time-delay type). Output: Overload and short-circuit protection. Isolation Reinforced isolation between input (AC mains) and output (24V DC system) as per safety standards. Status Indicator (LED) Green PWR LED: Illuminates when input voltage is present and output is within normal range. Connection Input: Screw terminal block for Line (L) and Neutral (N) AC connection. Output: Via plug-in connector to the CPU backplane. Mounting Standard 35mm DIN Rail (EN 60715). Mounts to the left of the CPU module. Operating Temperature 0°C to +55°C (without derating). Storage Temperature -25°C to +70°C. Humidity 5% to 95% non-condensing. Altitude Up to 2000m without derating. Safety Standards Complies with UL 508 (Industrial Control Equipment), IEC/EN 61131-2 (Programmable Controllers). CE marked. EMC Standards Complies with IEC/EN 61000-6-2 (Immunity) and IEC/EN 61000-6-4 (Emission) for industrial environments. Dimensions (W x H x D) Approx. 45mm x 110mm x 75mm (Specific to the XSeries power module form factor). Weight Approx. 0.3 kg.

Technical Parameters Parameter Specification Product Range / Series System Pro M compact, S200 Series Type Miniature Circuit Breaker (MCB) Poles 1 Pole (1P) Rated Current (In) 13A Tripping Characteristic (Curve) C Curve (Medium Starting Current). • Thermal Trip: 1.13 to 1.45 x In (Time-delayed). • Magnetic Trip: 5 to 10 x In (Instantaneous). Rated Operational Voltage (Ue) 230/400V AC Rated Insulation Voltage (Ui) 500V AC Rated Impulse Withstand Voltage (Uimp) 6 kV Rated Frequency 50/60 Hz Rated Breaking Capacity (Icn) 6 kA (6,000 Amps) at 230/400V AC according to IEC/EN 60898-1. 10 kA (10,000 Amps) according to IEC/EN 60947-2. Utilization Category A (for general use, no intentional time delay) Terminals • Upper/Lower: Suitable for both incoming and outgoing connections. • Cable Range: 1 - 25 mm² (solid/stranded) • Torque: 2.0 - 2.5 Nm (for terminal screws M5) Mechanical Endurance 20,000 operating cycles (make & break at no load) Electrical Endurance 10,000 operating cycles (at rated current In) Ambient Temperature Range -25°C to +60°C (for calibration, reference temp is +30°C) Mounting DIN Rail EN 60715 (35mm) Width (Modular Size) 17.5 mm (1 module) Standards Compliance IEC/EN 60898-1 (Domestic and similar use). IEC/EN 60947-2 (Industrial use). CCC, CE, KEMA, etc. Pollution Degree 2 Protection Degree (IP Code) IP20 (when installed in an enclosure) Connection Capacity Up to 2 x 25mm² cables or 1 x 35mm² cable per terminal (depending on type).

Technical Parameters Parameter Specification Manufacturer Part Number YU-1SDA038292R1 (Commercial Reference) Product Series / Type CP-S (CP Series Switching Power Supply) Rated Output 24V DC, 2.5A Output Power 60W (24V * 2.5A) Input Voltage Range (AC) 220-240V AC, single-phase, 50/60 Hz. (Note: Often designed for a specific range like 200-240V or a global range 85-264V – this specific model is for 220-240V). Input Current Typically ~0.5A at 230V AC. Inrush Current Limiting Yes, to protect internal components and prevent nuisance tripping of upstream breakers. Output Voltage Adjustment Usually via a small potentiometer to fine-tune output (e.g., 24V ±5%). Line Regulation < ±1% for input voltage variation. Load Regulation < ±2% for load variation (0% to 100%). Ripple & Noise Typically < 150mV peak-to-peak. Efficiency Typically > 85%. Protections Output: Short-circuit (SC), Overload (OL), Overvoltage (OVP). Input: Fuse protection. Isolation Voltage (Input-Output) Typically 3000V AC or 4000V AC. Cooling Method Convection cooling (fanless). Operating Temperature -25°C to +70°C (with derating above ~60°C). Storage Temperature -40°C to +85°C. Housing Material Metal (for heat dissipation) or robust plastic. Mounting Standard 35mm DIN Rail (EN 60715). Terminals Screw clamp terminals for input (AC) and output (DC). Safety & EMC Standards Complies with IEC/EN/UL 62368-1 (Safety), IEC/EN 61000-6-2 (Immunity), IEC/EN 61000-6-4 (Emission). CE marked. Protection Class / Degree IP20 (for installation inside an enclosure). Dimensions (W x H x D) Approx. 70mm x 90mm x 55mm (varies slightly; example: 70x90x55mm).

Technical Parameters Parameter Specification Product Range DXN Q Series Type RCBO (Residual Current Breaker with Overcurrent protection) Poles / Protected Poles 2 Poles (1P+N) Rated Current (In) Typically 20A (Other ratings like 16A, 25A, 32A, 40A may exist in the Q35 series – verify specific model code). Tripping Characteristic C Curve (Medium start-up characteristic, suitable for inductive and general loads). Rated Residual Current (IΔn) 30 mA (Standard for personal protection against electric shock). Residual Current Type Type A (AC and pulsating DC sensitive). Rated Operational Voltage (Ue) 230V AC Rated Insulation Voltage (Ui) 500V Rated Impulse Withstand Voltage (Uimp) 6 kV Rated Breaking Capacity (Icn) Typically 6000A (6 kA) at 230/400V AC. Utilization Category AC: According to IEC/EN 61009-1 Mechanical Endurance 20,000 operating cycles Electrical Endurance 6,000 operating cycles (at In) Terminal Torque 2.0 - 2.5 Nm Connection Capacity (Rigid Cable) 25 mm² Connection Capacity (Flexible Cable) 16 mm² Width (Modular) 35 mm (2 modules) Mounting DIN Rail EN 60715 (35mm) Standards Compliance IEC/EN 61009-1, IEC/EN 60947-2 Ambient Temperature -25°C to +60°C (Operation) Pollution Degree 3 Protection Degree IP20 (installed in enclosure)

Technical Parameters Specification Details Product Type Low‑Voltage Molded Case Circuit Breaker (MCCB) Series / Model ABB Tmax XT5N 400 TMA 720 4P Rated Current (In) 400 A Number of Poles 4 (3 phases + neutral) Trip Unit Type TMA (Thermal‑Magnetic Adjustable) Trip Setting Range Adjustable for overload/current protection (typical range includes 280–400 A) Rated Insulation Voltage (Ui) 1000 V Rated Impulse Withstand Voltage (Uimp) 8 kV Rated Operational Voltage (Ue) Up to 690 V AC / suitable DC range depending on installation practice Interrupting Capacity (Icu / Ics) High interrupting capacity for AC and DC systems, suitable for heavy distribution systems Connection Type Front (FF) terminals Standards Compliance Designed to meet IEC / EN low‑voltage circuit breaker standards Mechanical Durability High cycle life typical for industrial breakers Electrical Durability Designed for many electrical switching operations Mounting Style Fixed‑mounted breaker for panel installation

Technical Parameters Specification Typical Value / Function Product Type Medium-voltage motor-operated earthing switch system Core Mechanism EK6 earthing switch Actuator / Drive ST‑E motorized actuator Motor / Accessory Module MT585 Rated Voltage 12 kV – 40.5 kV (depending on EK6 variant) Rated Short-Circuit Making Current Up to ~80 kA (depending on configuration) Mounting Indoor switchgear compartment Operation Type Remote / motorized earthing switch actuation Control Interfaces Motor drive control, limit switches for position feedback Mechanical Endurance High cycle mechanical lifetime typical for MV active parts Applicable Standards IEC 62271 series for MV earthing switches Typical Uses Grounding busbars or circuits for maintenance or safety locking Drive Supply Auxiliary low-voltage AC/DC for ST‑E/MT585 module Feedback Signals Limit switches or auxiliary contacts for status monitoring Environmental Suitability Typical indoor switchgear conditions

Typical Technical Parameters Specification Details Product Type Electronic Trip Unit Test Device Name Ekip TT accessory Intended Use Trip test for ABB electronic trip units on breakers Compatible Breakers Moulded‑case and LV breakers with Ekip trip units (e.g., Tmax XT2/XT4, Emax²) Key Functions Trip test, LED test, latest trip status indication Power Supply Self‑contained (battery powered) to energize the trip unit Connection Interface Front test port on the Ekip trip unit Form Factor Handheld / portable test unit Status Indication LEDs to show test status and recent trip cause Typical Use Commissioning, diagnostics, maintenance Weight / Size Compact, pocket‑sized accessory

Technical Parameters Specification Typical Details Product Type Spring‑charge / Storage Motor for Breaker Mechanism Model Family HDZ‑70‑30x Brand ABB Function Charges the mechanical spring in medium‑voltage circuit breaker operating mechanism Control / Supply Voltage 110–240 V AC/DC (commonly chosen per variant) Drive Power ~180–200 W (motor power for charging spring) Operating Speed Fast torque for charging internal spring mechanism Mounting Mounted on breaker frame or actuator assembly Environment Low‑voltage control compartment within breaker gear Typical Use Medium‑voltage vacuum breaker mechanism actuation Applications Spring charging for breaker open/close operation in switchgear

Technical Parameters Specification Details Product Type Ethernet Communication Interface Module Model / Part Number PNQ22‑FBP.0 (1SAJ261000R0100) Brand ABB Primary Function PROFINET IO interface for Universal Motor Controllers Compatible Devices Up to 4 x UMC100.3 motor controllers Network Protocol PROFINET IO industrial Ethernet Ethernet Ports Dual RJ45 for network connection and daisy‑chain/switch Control Interface Type Industrial Ethernet with integrated switch Supply Voltage 24 V DC control supply Mounting DIN‑rail (IEC standard TH35) Degree of Protection IP20 (enclosure) Operating Temperature 0 °C to +60 °C Storage Temp. ‑25 °C to +70 °C Pollution Degree 3 Power Consumption ~3.5 W Dimensions (W×H×D) ~45 mm × 90 mm × 96 mm Weight ~0.172 kg Indicators LED status for network and communication activity Recommended Mounting Rail TH35‑15 / TH35‑7.5 Standards IEC/EN and industrial Ethernet standards

Technical Parameters Specification Details Product Type AC Magnetic Contactor Series / Model AL9‑40‑00 (4‑pole) Number of Poles 4 Normally Open (4NO) Rated Operational Voltage (AC) Up to 690 V AC Rated Operational Current (AC‑3, motor load) 9 A Rated Operational Current (AC‑1, resistive load) 25–40 A Coil / Control Voltage Options Multiple, e.g., 12 V DC, 24 V DC, 110 V DC, 220 V DC, 230–240 V AC/DC Rated Insulation Voltage 1000 V AC Rated Impulse Withstand Voltage 8 kV Duty Type AC‑1 / AC‑3 (IEC 60947‑4‑1) Mechanical Durability >10 million operations Electrical Durability >1 million operations Terminals Screw‑type connections Auxiliary Contacts None (main poles only) Mounting Panel / DIN rail or screw mount Operating Temperature ‑25 °C to +60 °C Protection Rating IP20 Typical Applications Motor starters, lighting systems, general power switching Standards Compliance IEC 60947 series

Parameters Specification Details (Typical) Product Type Loop Switch / Continuity Module Function Maintains network loop continuity in modular controller systems Communication Interfaces Multiple RJ45 network/BUS ports (Ethernet & internal BUS) Mounting DIN‑rail or panel mount in switchgear Operation Auto‑bypass of removed controllers Typical Use Maintain communication in redundant ring topologies Systems Used with ABB modular rack/withdrawable control modules (e.g., MC510)

Technical Parameters Specification Details Product Type Digital Input Module for PLC I/O system Model / Part Number DI562 (e.g., 1TNE968902R2102) Brand ABB PLC System Compatibility AC500‑eCo / S500‑eCo I/O modules family Number of Digital Inputs 16 channels Input Type Sink/Source (configurable) Nominal Input Voltage 24 V DC Maximum Input Voltage 0 … 30 V Input Current (typ.) ~5 mA per channel Response/Delay Time ~8 ms (typical) Input Signal Range Compatible with standard 24 V DC discrete signals Status Indicators LED indicators for each input channel Isolation Group isolation between channels and logic Connection Type Pluggable terminal/cage connectors Degree of Protection IP20 Operating Temperature 0 … +60 °C Storage Temperature -40 … +70 °C Dimensions (approx.) 135 × 34 × 74 mm (length × width × height) Weight ~0.12 kg