Key Parameters Parameter Specification Model / Part Number CL2‑623Y (ABB) ABB Catalog No. 1SFA619403R6233 Product Type Compact Pilot Light / Indicator Light Lamp Color Yellow Illumination Illuminated (LED) Rated Voltage 230 V AC Lamp Type Integrated LED Activation Type Pilot light head (indicator) Mounting Hole Diameter 22 mm standard panel cutout Degree of Protection (Front) IP66 / IP67 / IP69K Degree of Protection (Terminals) IP20 Pollution Degree 3 Ambient Operating Temperature –25 °C to +70 °C Storage Temperature –40 °C to +85 °C Connection Type Screw clamp terminals Wire Stripping Length ~8 mm Rated Frequency 50/60 Hz Terminal Screw Torque ~0.9 N·m Dimensions (Approx.) ~30 mm × 30 mm × 52 mm (W×H×D) Net Weight ~0.018 kg

Key Parameters Parameter Specification Model / Part Number 1SFA619101R1112 ABB Catalog No. CP2‑11G‑10 Product Type Compact Pushbutton Actuator Style Flush pushbutton Function Maintained (push once to latch) Illumination Illuminated (with internal lamp) Actuator Color Green Contact Configuration 1 × Normally Open (1NO) Rated Voltage 24 V AC/DC Rated Frequency 50/60 Hz Rated Operational Current (AC‑15) ~1 A @ 240 V / 1.5 A @ 120 V Rated Operational Current (DC‑13) ~0.3 A @ 24 V / 0.2 A @ 125 V Mechanical Durability ~0.5 million operations Bezel / Housing Black plastic Mounting Size Standard 22 mm panel cutout Degree of Protection Terminals IP20 Operating Temperature –25 °C to +70 °C Dimensions (approx.) ~30 × 30 × 55 mm (W × H × D) Typical Applications Machine control panels, operator interfaces, status control

Key Parameters Parameter Specification Product Name ABB MPEP4‑10R Emergency Stop Pushbutton Catalog / Ordering Code 1SFA611524R1001 Product Type Modular emergency stop pushbutton Actuator Type 40 mm red mushroom head Function Emergency stop — pull release Illumination Non‑illuminated Contact Block Not included (no contact block) Mounting Size Standard 22 mm panel cutout Color Red (emergency standard) Degree of Protection Typically front IP66; terminals IP20 (industry typical) Dimensions (approx.) 40 mm × 40 mm × 68 mm (W × H × D) Net Weight ~0.036 kg Environmental Ratings Operating: −25 °C to +70 °C; Storage: −30 °C to +85 °C Standards/Certifications RoHS compliant Range ABB modular pilot devices

Key Parameters Parameter Specification Product Type Selector Switch (compact) Model / Part Number C2SS1‑10B‑10 Extended Type / Catalog ID 1SFA619200R1016 Function Maintained two‑position selector Positions 2 Actuator / Handle Short handle (manual rotary) Contact Configuration 1 × Normally Open (1NO) Illumination Non‑illuminated Bezel / Housing Black plastic Rated Operational Voltage 24 … 300 V AC/DC Rated Operational Current ~1 A at 240 V AC / 0.3 A at 24 V DC Rated Insulation Voltage (Ui) 300 V Rated Impulse Withstand 6 kV Mechanical Durability ~0.5 million operations Ambient Operating Temp. –25 °C to +70 °C Storage Temperature –40 °C to +85 °C Mounting Size ~22 mm compact range Dimensions ~30 × 30 × 72 mm (W × H × D) Terminal Type Screw terminals Degree of Protection Front: IP66 / IP67 / IP69K; Terminals: IP20

Technical Parameters Parameter Specification Product Series CL Series (Compact Line Relay) Model Decoding CL2-520R • CL2: Series and possibly frame size designation. • 5: Number of poles / contact configuration. "5" often indicates 2 Changeover Contacts (2 Form C) in some ABB coding systems. • 20: Nominal Coil Voltage = 110V AC (Common code: 20 often corresponds to 110V AC, 50/60Hz). • R: Contact Arrangement code, here likely confirming the 2 Form C configuration and/or a 10A rating. Contact Configuration 2 Changeover (2 Form C / 2 PDT) - 2 poles, each with Common (C), Normally Open (NO), and Normally Closed (NC) terminals. Contact Material Silver Cadmium Oxide (AgCdO) or Silver Tin Oxide (AgSnO₂) for high arc endurance. Rated Load (Resistive, per contact) 10A @ 250V AC 10A @ 30V DC Maximum Switching Voltage 250V AC, 30V DC Maximum Switching Power (per contact) 2,500 VA (AC), 300 W (DC) Coil Voltage 110V AC, 50/60 Hz. Operable range: typically 80% to 110% of nominal. Coil Power Consumption Approx. 3.5 VA (for AC coil). Nominal Coil Current Approx. 32 mA @ 110V AC. Operate / Release Time Typically ≤ 20 ms. Electrical Life ≥ 100,000 operations at rated resistive load. Mechanical Life ≥ 10,000,000 operations (no load). Insulation Resistance > 100 MΩ (at 500V DC). Dielectric Strength (Hi-Pot) Coil to Contacts: 4,000V AC, 50/60Hz for 1 min. Between Open Contacts: 1,500V AC, 50/60Hz for 1 min. Between Poles: 2,000V AC, 50/60Hz for 1 min. Ambient Temperature Range -40°C to +70°C (Operation). Mounting Pluggable onto a dedicated 8-pin or 11-pin CL series socket (e.g., ABB CL-Socket). The socket is DIN-rail mountable. Terminals (via Socket) Screw clamp terminals on the socket. Standards Compliance IEC/EN 61810-1, UL 508, CSA C22.2 No. 14, CE, RoHS. Safety Approvals UL Recognized, CSA Certified. Dimensions (Relay only) Approx. 35mm (W) x 25mm (H) x 40mm (D). Weight Approx. 70g.

Technical Parameters Parameter Specification Product Series MLBL Series (Modular Branch Wiring Duct) Model Decoding MLBL-07G • MLBL: Series name for branch/finger duct. • 07: Likely indicates the internal dimensions (Height x Width). "07" often corresponds to a common size, e.g., 45mm x 60mm (H x W, internal). This is a key identifier for size. • G: Configuration code. Often stands for "with 1 Partition" or "Gris" (French for Gray, indicating color/material type). Most commonly, "G" in this context denotes a partitioned version. Type Snap-on / Hinged Lid Finger Duct Material Polyamide 6.6 (PA66), Halogen-free, Flame Retardant (UL94 V-0). Standard Color Light Gray (similar to RAL 7035). Internal Dimensions (H x W) Approx. 45mm x 60mm (This is the most critical guess; "07" must be verified against catalog). This is the usable space inside the duct base. External Dimensions (H x W) Slightly larger than internal dimensions, depending on wall thickness. Internal Configuration Likely with 1 longitudinal vertical partition, dividing the internal space into 2 compartments of equal or specified unequal width. Partition Material Integral with the duct base (same material). Lid Type Flexible, snap-on "finger" lid. Temperature Range -40°C to +120°C (for continuous use). Flammability Rating UL 94 V-0 (Self-extinguishing). Standards Compliance IEC 61439-1/-2 (Low-voltage switchgear assemblies), RoHS, REACH. Mounting Via integral mounting feet for screwing to backplate, or adhesive backing. Typical Fill Capacity Should not exceed 50-60% of internal cross-sectional area for proper heat dissipation and wire access. Packaging Sold in standard lengths (e.g., 1-meter or 2-meter pieces).

Technical Parameters Parameter Specification Product Series CP Series (Compact Plug-in Relay) Model Decoding CP1-10R-10 • CP1: Basic series designation. • 10: Nominal Coil Voltage = 24V DC. (Note: In common CP series coding, "10" often corresponds to 24V DC. "12" is 12V DC. Always verify.) • R: Contact Arrangement = 1 Changeover (Form C, 1 CO). • 10: Final code, typically indicating a 10A contact rating. Contact Configuration 1 Changeover (Form C / SPDT) - 1 Common (C), 1 Normally Open (NO), 1 Normally Closed (NC). Contact Material Fine Silver or Silver Alloy. Rated Load (Resistive) 10A @ 250V AC 10A @ 30V DC Maximum Switching Voltage 250V AC, 30V DC Maximum Switching Power 2,500 VA (AC), 300 W (DC) Minimum Switching Load 100 mA at 5V DC (to ensure reliable contact cleaning). Coil Voltage 24V DC (Nominal). Standard operating range: 19.2V DC to 28.8V DC (80% - 120% of nominal). Coil Power Consumption Approx. 0.9W (for DC coil). Nominal Coil Current Approx. 37.5 mA @ 24V DC. Operate Time Typically ≤ 10 ms. Release Time Typically ≤ 5 ms. Electrical Life ≥ 100,000 operations at rated resistive load. Mechanical Life ≥ 10,000,000 operations (no load). Insulation Resistance > 100 MΩ (at 500V DC). Dielectric Strength (Hi-Pot) Coil to Contacts: 4,000V AC, 50/60Hz for 1 min. Between Open Contacts: 1,000V AC, 50/60Hz for 1 min. Ambient Temperature Range -40°C to +70°C (Operation and storage). Shock & Vibration Resistance Suitable for standard industrial environments. Mounting Pluggable onto a standard 8-pin or 10-pin socket (e.g., ABB PF083A or PF103A). Socket is DIN-rail or PCB mountable. Terminals (via Socket) Screw clamp terminals on the socket. Standards Compliance IEC/EN 61810-1, UL 508, CSA C22.2 No. 14, CE, RoHS. Safety Approvals UL Recognized (Component), CSA Certified. Dimensions (Relay only) Approx. 20mm (W) x 10mm (H) x 25mm (D) (for 8-pin type). Dimensions vary slightly by pin count. Weight Approx. 15g.

Technical Parameters Parameter Specification Product Series MPT / MET Series (Thermal Overload Relay) Model Decoding MPET4-10R • MPET: Series and frame size designation. • 4: Likely indicates the current range setting scale or frame size level (e.g., covering a specific FLA range). • 10: Trip Class 10. This means it will trip within 10 seconds at 720% of its set current. • R: Manual Reset operation. Rated Operational Current (Iᵉ) Depends on the specific "4" frame. Typical range for an MPET4 is approximately 0.11A - 25A (or similar). The exact adjustable range is critical and must be verified. Trip Class Class 10 (Standard for general-purpose motors). Poles / Protected Phases 3 Poles (for three-phase motor protection). Ambient Temperature Compensation Yes, typically for -20°C to +60°C. Trip Current Adjustment Continuous dial adjustment within the relay's specified range (e.g., 0.11 - 0.16A up to 18 - 25A). Auxiliary Contacts Typically: • 1 NO (97-98) - Can be used for trip indication. • 1 NC (95-96) - Connected to break the contactor coil circuit. Configuration may vary. Reset Mode Manual Reset (R). Requires physical push-button reset after a trip. Mounting Direct snap-on/plug-on mounting to the side of compatible ABB contactors (e.g., AF09, AF12, AF16, etc.). Can also be mounted separately with a bus kit. Compatible Contactors ABB A, AF, AX series of corresponding sizes. Standards & Approvals IEC/EN 60947-4-1, UL 508, CSA C22.2 No. 14, CE, CCC. Electrical Durability ≥ 5,000 operating cycles (at rated current). Mechanical Durability ≥ 10,000 operating cycles. Screw Terminals For main power (L1, L2, L3 / T1, T2, T3) and auxiliary contacts. Insulation Voltage 690V / 1000V (Ui / Ue). Utilization Category AC-3 (Squirrel cage motor switching).

Technical Parameters Parameter Specification Product Series CP Series (Compact Plug-in Relay) Model Decoding CP1-33G-10 • CP1: Series designation. • 33: Nominal Coil Voltage = 110V AC (Common code: 33 often corresponds to 110V AC, 50/60Hz). • G: Contact Arrangement = 3 Changeover (3 Form C / 3PST-NO/NC). • 10: Variation code, typically indicating a 10A per contact rating. Contact Configuration 3 Changeover (3 Form C) - 3 poles, each with Common (C), Normally Open (NO), and Normally Closed (NC) terminals. Contact Material Silver Alloy (e.g., AgSnO₂) for high arc resistance and long life. Rated Load (Resistive, per contact) 10A @ 250V AC 10A @ 30V DC Maximum Switching Voltage 250V AC, 30V DC Maximum Switching Power (per contact) 2,500 VA (AC), 300 W (DC) Coil Voltage 110V AC, 50/60 Hz. Operable within a standard range (e.g., 80% to 110% of nominal). Coil Power Consumption Approx. 2.2 VA (for AC coil). Nominal Coil Current Approx. 20 mA @ 110V AC. Operate / Release Time Typically ≤ 20 ms. Note: AC coils have inherent zero-crossing behavior affecting timing. Electrical Life ≥ 100,000 operations at rated resistive load. Mechanical Life ≥ 10,000,000 operations (no load). Insulation Resistance > 100 MΩ (at 500V DC). Dielectric Strength (Hi-Pot) Coil to Contacts: 4,000V AC, 50/60Hz for 1 min. Between Open Contacts: 1,500V AC, 50/60Hz for 1 min. Between Poles: 2,000V AC, 50/60Hz for 1 min. Ambient Temperature Range -40°C to +70°C (Operation). Mounting Pluggable onto an 11-pin socket (e.g., ABB PF113A). The socket is DIN-rail mountable. Terminals (via Socket) Screw clamp terminals on the socket. Standards Compliance IEC/EN 61810-1, UL 508, CSA C22.2 No. 14, CE, RoHS. Safety Approvals UL Recognized, CSA Certified. Dimensions (Relay only) Approx. 29mm (W) x 25mm (H) x 36mm (D). Weight Approx. 55g.

Technical Parameters / Specifications Parameter Specification Product Series CP Series (Compact Plug-in Relay) Model Decoding CP1-12G-10 • CP1: Basic series designation. • 12: Nominal Coil Voltage = 12V DC. • G: Contact Arrangement = 1 Changeover (Form C, 1 CO). (Note: 'G' often denotes a specific, higher-power variant within the 1CO range). • 10: Variation code, typically confirming a 10A contact rating. Contact Configuration 1 Changeover (Form C / SPDT) - 1 common (C), 1 normally open (NO), 1 normally closed (NC). Contact Material Fine Silver or Silver Alloy (AgSnO₂). Rated Load (Resistive) 10A @ 250V AC 10A @ 30V DC Maximum Switching Voltage 250V AC, 30V DC Maximum Switching Power 2,500 VA (AC), 300 W (DC) Minimum Switching Load 100 mA at 5V DC (for reliable contact wiping). Coil Voltage 12V DC (Nominal). Standard operating range: 9V DC to 15V DC. Coil Power Consumption Approx. 1.1 W (for DC coil). Nominal Coil Current Approx. 92 mA @ 12V DC. Operate Time Typically ≤ 15 ms. Release Time Typically ≤ 10 ms. Electrical Life ≥ 100,000 operations at rated resistive load. Mechanical Life ≥ 10,000,000 operations (no load). Insulation Resistance > 100 MΩ (at 500V DC). Dielectric Strength (Hi-Pot) Coil to Contacts: 4,000V AC, 50/60Hz for 1 min. Between Open Contacts: 1,000V AC, 50/60Hz for 1 min. Between Poles & Frame: 2,500V AC, 50/60Hz for 1 min. Ambient Temperature Range -40°C to +70°C (Operation and storage). Shock & Vibration High resistance, suitable for industrial environments. Mounting Pluggable onto a standard 11-pin socket (e.g., ABB PF113A). The socket is DIN-rail mountable. Terminals (via Socket) Screw clamp terminals on the socket for secure wiring. Standards Compliance IEC/EN 61810-1, UL 508, CSA C22.2 No. 14, CCC, CE, RoHS. Safety Approvals UL Recognized (Component), CSA Certified. Dimensions (Relay only) Approx. 29mm (W) x 25mm (H) x 36mm (D). Weight Approx. 40g.

Technical Parameters Parameter Specification Product Series CP Series (Compact Plug-in Relay) Model Decoding CP1-12R-10 • CP1: Basic series designation. • 12: Nominal Coil Voltage = 12V DC. • R: Contact Arrangement = 1 Changeover (Form C, 1 CO). • 10: Variation code, often indicating 10A contact rating and/or pin layout. Contact Configuration 1 Changeover (Form C / SPDT) - 1 pole, common, normally open (NO), normally closed (NC). Contact Material Silver Alloy (AgSnO₂, AgNi, etc.) Rated Load (Switching Capacity) 10A @ 250V AC / 10A @ 30V DC (Resistive Load). This is the maximum current it can reliably switch. Maximum Switching Voltage 250V AC, 30V DC Maximum Switching Power 2,500 VA (AC), 300 W (DC) Coil Voltage 12V DC (Nominal). Operable within a range (e.g., 9V DC to 15V DC). Coil Power Consumption Approx. 0.9W (for DC coil). Nominal Coil Current Approx. 75 mA @ 12V DC. Operate Time Typically < 10 ms. Release Time Typically < 5 ms. Electrical Life ≥ 100,000 operations at rated load. Mechanical Life ≥ 10,000,000 operations (no load). Insulation Resistance > 100 MΩ (at 500V DC). Dielectric Strength Coil-Contacts: 4,000V AC, 50/60Hz for 1 min. Between Open Contacts: 1,000V AC, 50/60Hz for 1 min. Ambient Temperature Range -40°C to +70°C (Operation). Shock & Vibration Resistance High, suitable for industrial environments. Mounting Pluggable onto a standard 8 or 10-pin socket (e.g., ABB PF083A, PF103A). Socket is typically DIN-rail or PCB mountable. Terminals Plug-in pins. Standards Compliance IEC/EN 61810-1, UL 508, CSA C22.2 No. 14, CE, RoHS. Dimensions (L x W x H) Approx. 29mm x 12.5mm x 25mm (excluding pins). Weight Approx. 20g.

Technical Parameters Parameter Specification / Decoding Product Line ABB Cable Glands / Cable Accessories Type Plastic Cable Gland, EMC Shielding Type (Metal-Sprayed) Part Number Decoding CL-100Gywms • CL: Likely denotes Cable Level or Clamp series. • 100: The entry thread size. This is M40x1.5 (Metric 40mm thread, pitch 1.5mm). This is the size that screws into the enclosure. • G: Likely indicates a specific gland series or design (e.g., standard straight-through). • yw: Yellow-White color, typically associated with PA12 Polyamide material (good mechanical strength, UV resistance, chemical resistance). • ms: Metal-Sprayed (EMC version). Provides conductivity for grounding cable screens. Thread Size (Enclosure Entry) M40 x 1.5 (Metric) Sealing Range (Cable Ø) Typically 13 - 25 mm (This is the outer diameter range of the cable sheath that the gland can effectively clamp and seal). (Must verify with official datasheet) Material (Body & Nut) Polyamide 12 (PA12), Halogen-free, V0 flammability rating. Color: Yellow-White (RAL-like). EMC Shielding Yes. Metal-sprayed surface provides contact for cable screens/shields. Surface Resistance: Typically < 100 mΩ. Sealing Ring Material Often Silicone (SI) or EPDM rubber, integrated. Ingress Protection (IP Rating) Up to IP68 / IP69K when properly installed on a compatible enclosure and cable. Temperature Range -40°C to +100°C (for PA12 material, stationary use). UV Resistance Good (typical for PA12 yellow-white material). Standards Compliance IEC 62444 (Cable glands). EMC: Contributes to compliance with IEC/EN 61000-6-2 and -6-4. RoHS & REACH compliant. Corrosion Resistance Excellent resistance to oils, fuels, and many chemicals. Mounting Torque Refer to datasheet (e.g., 40-50 Nm for M40 size). Certifications May have UL, CSA, GL (marine) depending on specific variant.