Technical Parameters Parameter Specification Product Range / Series System Pro M compact, S200 Series Type Miniature Circuit Breaker (MCB) Poles 1 Pole (1P) Rated Current (In) 13A Tripping Characteristic (Curve) C Curve (Medium Starting Current). • Thermal Trip: 1.13 to 1.45 x In (Time-delayed). • Magnetic Trip: 5 to 10 x In (Instantaneous). Rated Operational Voltage (Ue) 230/400V AC Rated Insulation Voltage (Ui) 500V AC Rated Impulse Withstand Voltage (Uimp) 6 kV Rated Frequency 50/60 Hz Rated Breaking Capacity (Icn) 6 kA (6,000 Amps) at 230/400V AC according to IEC/EN 60898-1. 10 kA (10,000 Amps) according to IEC/EN 60947-2. Utilization Category A (for general use, no intentional time delay) Terminals • Upper/Lower: Suitable for both incoming and outgoing connections. • Cable Range: 1 - 25 mm² (solid/stranded) • Torque: 2.0 - 2.5 Nm (for terminal screws M5) Mechanical Endurance 20,000 operating cycles (make & break at no load) Electrical Endurance 10,000 operating cycles (at rated current In) Ambient Temperature Range -25°C to +60°C (for calibration, reference temp is +30°C) Mounting DIN Rail EN 60715 (35mm) Width (Modular Size) 17.5 mm (1 module) Standards Compliance IEC/EN 60898-1 (Domestic and similar use). IEC/EN 60947-2 (Industrial use). CCC, CE, KEMA, etc. Pollution Degree 2 Protection Degree (IP Code) IP20 (when installed in an enclosure) Connection Capacity Up to 2 x 25mm² cables or 1 x 35mm² cable per terminal (depending on type).