Technical Parameters General Product Type: Miniature Circuit Breaker (MCB) Model: S254S‑D16 Series: System pro M compact S200 series Number of Poles: 4 (four‑pole) Trip Curve: Type D (thermal‑magnetic) Mounting: DIN‑rail (TH35) Actuator: Toggle with ON/OFF indication Electrical Ratings Rated Current (In): 16 A Rated Operational Voltage: up to ~440 V AC for low‑voltage distribution Rated Insulation Voltage (Ui): ~440 V Rated Impulse Withstand Voltage (Uimp): ~4 kV Rated Short‑Circuit Breaking Capacity (Icu): ~20 kA at 230 V AC ~10 kA at 400 V AC Rated Service Short‑Circuit Breaking Capacity (Ics): Portion of Icu typical for S200 series Energy Limiting Class: Class 3 Mechanical & Connection Terminal Type: Screw terminals (finger‑safe) Connectable Conductor Size: Flexible with ferrule: ~0.75 … 25 mm² Rigid conductor: ~0.75 … 35 mm² Tightening Torque: Approx. 2.8 N·m Mechanical Endurance: ~20,000 operations Electrical Endurance: ~20,000 switching cycles Environmental Operating Ambient Temperature: Approx. −25 °C to +55 °C Storage Temperature: Typical industrial storage ambient Pollution Degree: Suitable for industrial environments Protection Rating: Terminals: IP20 Installed with panel cover: higher front protection possible Physical & Dimensions Modular Width: 4 modules (4P) Approx. Dimensions: Standard S200 series footprint Weight: Typical for 4‑pole S200 series breaker Features & Applications Thermal‑magnetic protection against overload and short circuit High inrush tolerance (Type D characteristic) for inductive and motor loads Widely used in distribution boards, switchboards, and pump circuits Suitable for commercial and light industrial electrical systems

Technical Parameters General Product Type: HRC (High Rupturing Capacity) fuse link Model / Type: OFAFC3GG630 Utilization Category: gG (general purpose, full range protection) Rated Current: 630 A Fuse Size / NH Size: NH3 / Size III Fuse System: DIN‑type industrial fuse link Electrical Ratings Rated Operational Voltage (AC): up to 500 V AC Rated Operational Voltage (DC): Application‑dependent (typically similar DC limits with correct holders) Breaking Capacity: High breaking capacity suitable for industrial systems (typically 80 kA or higher at 500 V AC; depends on exact specification) Rated Insulation Voltage (Ui): Suitably high for low‑voltage distribution applications Performance Overcurrent Protection: Provides full range protection for overload and short‑circuit faults in power distribution Current‑Limiting: Offers current‑limiting behavior to reduce let‑through energy and mechanical stress on system equipment Thermal Characteristics: Stable rating at ambient operating temperatures typical of industrial electrical rooms Mechanical & Physical Construction: Compact NH3 HRC fuse link with robust metal and insulating materials Mounting: Installed in compatible NH3 fuse bases or switch‑fuse disconnectors Indication: Some holders provide blown‑fuse indication when used with this link Environmental Operating Temperature: Standard industrial ambient range Pollution Degree: Designed for typical industrial environments and power distribution boards Applications Overcurrent protection in industrial power distribution systems Protection of feeders and sub‑circuits Protection of transformers and motor circuits Use in NH3 switch‑fuse disconnectors and bases Main and branch circuit protection in electrical panels

Technical Parameters General Product Type: Miniature Circuit Breaker (MCB) Model: S202M‑C6DC Series: System pro M compact S200MDC Number of Poles: 2 (two‑pole configuration) Trip Curve / Characteristic: Type C (thermal‑magnetic) Mounting: DIN‑rail (IEC 60715 TH35) Actuator: Toggle ON/OFF indicator Electrical Ratings Rated Current (In): 6 A Rated Operational Voltage (DC): 440 V DC (nominal DC applications) Rated Insulation Voltage (Ui): 440 V Rated Impulse Withstand Voltage (Uimp): 4 kV Rated Short‑Circuit Breaking Capacity (Icu): 10 kA at rated DC voltage Input Voltage Type: DC (direct current) Trip Mechanism: Thermal element for overload and magnetic element for short‑circuit protection Connection & Wiring Terminal Type: Screw‑type connections Connectable Conductor Size: Typical industrial range (e.g., up to ~25 mm² flexible with ferrules; up to ~35 mm² rigid) Tightening Torque: Standard torque recommended for MCB terminals Mechanical & Durability Mechanical Endurance: High lifecycle suitable for frequent switching Electrical Endurance: Designed for repeated DC fault interruption Contact Position Indication: Visible ON/OFF status Physical & Dimensions Modular Width: 2 units (2P width) Approx. Depth / Length: Standard S200MDC footprint Approx. Height: Typical panel‑mount MCB height Net Weight: Lightweight for modular DIN‑rail systems Environmental Operating Temperature Range: Typical industrial ambient conditions Protection Rating: Terminals: IP20 Panel Mounted Front: Typical panel can provide higher IP rating Pollution Degree: Suitable for industrial environments Standards & Compliance Designed to meet IEC/EN 60898‑2 and IEC/EN 60947‑2 circuit breaker standards for miniature breakers and DC applications. Applications DC power distribution protection Battery‑based systems and UPS/DC buses Industrial control and automation DC circuits Renewable energy (e.g., PV/solar DC circuits, DP systems) Protection for DC motor circuits and control loads

Technical Parameters General Product Type: Miniature Circuit Breaker (MCB) Model: S203M‑D25 Series: System pro M compact S200M Number of Poles: 3 (three‑pole) Trip Curve / Characteristic: Type D (thermal‑magnetic) Mounting: DIN rail (TH35) Actuator: Toggle switch with ON/OFF indication Terminal Type: Screw terminals Applicable Standards: IEC/EN 60898‑1, IEC/EN 60947‑2 Pollution Degree: 3 Overvoltage Category: III Current Limiting Class: 3 Installation Size: Standard modular width for S200M series Electrical Ratings Rated Current (In): 25 A Rated Operational Voltage: AC: up to 400 V AC (IEC 60947‑2): up to 440 V Rated Insulation Voltage (Ui): 440 V Rated Impulse Withstand Voltage (Uimp): 4 kV Rated Short‑Circuit Breaking Capacity: 10 kA (IEC / EN 60898 at 230 V AC) 15 kA (IEC 60947‑2 at 400 V AC) Rated Ultimate Short‑Circuit Breaking Capacity (Icu): Up to 25 kA at 230 V AC Rated Service Short‑Circuit Breaking Capacity (Ics): Typical portion of Icu Frequency Rating: 50/60 Hz Connection & Wiring Connectable Conductor Cross‑Section: Solid: 0.75 – 35 mm² Flexible with Ferrule: 0.75 – 25 mm² Busbar Connection: up to 10 mm × 10 mm Tightening Torque: approx. 2.8 N·m Mechanical & Endurance Mechanical Endurance: ~20,000 cycles Electrical Endurance: ~20,000 switching cycles Power Loss: ~9.3 W total (approx. 3.1 W per pole) Environmental Operating Ambient Temperature: approx. –25 °C to +55 °C Storage Temperature: approx. –40 °C to +70 °C Degree of Protection: Terminals: IP20 With enclosure cover (panel mounted): typical IP40 Physical Dimensions Width: ~52.5 mm Height: ~88 mm Depth / Recess Depth: ~69 mm Weight: approx. ~0.375 kg Features & Applications Thermal‑magnetic protection for circuits with moderate to high inrush currents Suitable for distribution boards, switchboards, and motor circuits Protection against overload and short‑circuit faults in residential, commercial, and industrial environments Can be fitted with auxiliary contacts or accessories to extend functionality

Technical Parameters General Product Type: Compact pushbutton switch Model: CP1‑10R‑02 Actuator Style: Flush pushbutton Actuator Color: Red Design: Non‑illuminated, momentary (spring return) Contact Configuration: 0 Normally Open (NO), 2 Normally Closed (NC) contacts Series: CP1 compact pilot devices Mounting: Panel mount (standard 22 mm hole) Electrical Ratings Rated Insulation Voltage (Ui): Up to ~300 V Rated Impulse Withstand Voltage (Uimp): ~6 kV Rated Operational Voltage: Up to ~300 V AC/DC Rated Operational Current (AC‑15): Up to ~1 A (e.g., 240 V AC) Rated Operational Current (DC‑13): Up to ~0.3 A at 24 V DC; ~0.2 A at 125 V DC Power Loss: Maximum ~5 W Mechanical & Physical Actuation: Momentary pushbutton (returns when released) Mechanical Durability: Approx. 0.5 million operations Terminal Type: Screw clamp terminals Connection Capacity: Flexible or solid conductors ~0.5–1.5 mm² Tightening Torque: Approx. 0.8–1.0 N·m Wire Stripping Length: Approx. 6 mm Weight: ~0.022 kg Dimensions: Width: ~30 mm Height: ~30 mm Depth: ~55 mm Environmental & Protection Front Protection Rating: IP66 / IP67 / IP69K (dust/water protection when installed) Terminal Protection: IP20 Operating Ambient Temperature: ~‑25 °C to +70 °C Storage Temperature: ~‑40 °C to +85 °C Pollution Degree: Suitable for industrial environments Enclosure/NEMA Types: Type 1 / Type 12 / Type 13 / Type 3R / Type 4 / Type 4X (depending on installation and sealing) Applications Start/stop and control signaling Machine panel operator interfaces Manual trigger in automation systems Industrial control and safety circuits

Technical Parameters General Product Type: Miniature Circuit Breaker (MCB) Model: S201‑C6 Series: System Pro M Compact S200 Number of Poles: 1 (Single‑pole) Trip Curve: C‑curve (thermal‑magnetic) Mounting: DIN rail (TH35 standard) Electrical Ratings Rated Current (In): 6 A Rated Operational Voltage (AC): up to ~230/400 V AC (IEC), suitable for up to ~277/480Y VAC in some regions Rated Insulation Voltage (Ui): ~400–440 V Rated Frequency: 50/60 Hz Breaking Capacity: ~6 kA (short‑circuit breaking capacity) Rated Service Short‑Circuit Capacity (Ics): ~7.5 kA Rated Ultimate Short‑Circuit Breaking Capacity (Icu): ~10 kA Rated Impulse Withstand Voltage (Uimp): ~4 kV Energy Limiting Class: Class 3 Trip Mechanism: Thermal for overload + magnetic for short circuit Contact Position Indication: ON/OFF indication Mechanical & Physical Actuator: Toggle switch, black with red/green indication Terminal Type: Screw terminals (failsafe bi‑directional cylinder lift) Connecting Capacity: Busbar: ~10 mm² Flexible conductor with ferrule: ~0.75 – 25 mm² Rigid conductor: ~0.75 – 35 mm² Stranded conductor: ~0.75 – 35 mm² Power Loss: ~2 W at rated conditions Mechanical Endurance: ~20,000 operations Electrical Endurance: ~20,000 operations Environmental Ambient Operating Temperature: ~‑25 °C to +55 °C Storage Temperature: ~‑40 °C to +70 °C Pollution Degree: Suitable for typical industrial/household environments Overvoltage Category: III Degree of Protection: IP20 (breaker body/terminals); panel installation may provide higher front protection Physical Dimensions Width: ~17.5 mm (1 modular unit) Depth / Length: ~69 mm Height: ~88 mm Weight: ~0.125 kg Standards Compliance Designed to meet modern circuit‑breaker safety and performance standards used worldwide, making it suitable for residential, commercial, and light industrial installations. Applications Overload and short‑circuit protection for branch circuits Distribution boards and consumer units Lighting circuits and receptacles Protection of wiring and downstream devices in buildings, factories, and equipment panels General electrical distribution protection up to rated capacity

Technical Parameters General Product Type: Selector switch (compact range) Model: C3SS1‑10R‑20 Actuator: Short rotary handle (red) Illumination: Non‑illuminated Function: Maintained (latching) 3‑position selector Maintained Positions: A, B, C Contact Configuration: 2 × Normally Open (NO) contacts 0 × Normally Closed (NC) contacts Panel Cut‑out Diameter: 22 mm Mechanical Bezel / Housing Material: Black plastic Operator Type: Short handle Number of Positions: 3 Throw / Angle: Approx. 45° between positions Contact Actuation: Maintained through all three positions Mounting / Terminals: Screw terminal connections Compact Size (Approx.): ~30 mm height × ~30 mm width × ~72 mm depth Mechanical Life: ~500,000 operations (typical) Electrical Ratings Rated Operational Voltage: up to ~300 V AC/DC Rated Operational Current (AC‑15): ~1 A @ 220–240 V AC; ~1.5 A @ 24–127 V AC Rated Operational Current (DC‑13): ~0.2 A @ 125 V DC; ~0.3 A @ 24 V DC Contact Material: Industrial silver alloy or equivalent Environmental & Protection Operating Temperature Range: ~‑25 °C to +70 °C Storage Temperature Range: ~‑40 °C to +85 °C Front Protection Rating: IP66 / IP67 / IP69K (when correctly mounted in panel) Terminal Protection: IP20 Pollution Degree: Suitable for typical industrial environments Standards & Compliance Designed to conform to international low‑voltage control equipment standards (e.g., IEC/EN 60947 series). Applications Mode selection (e.g., local/auto/remote) Forward/neutral/reverse or multi‑state control logic Manual inputs and overrides in automation systems Control panel operator stations Machinery and process control interfaces

Technical Parameters General Product Type: Miniature contactor relay (mini contactor) Series: KC6 Model / Order Code: KC6‑40E (e.g., KC6‑40E‑05) Control Voltage: 220 – 240 V DC coil Number of Poles: 4 Contact Configuration: 4 × Normally Open (NO) Mounting: DIN‑rail or panel mount with screw terminals Coil Consumption: Low coil power (approx. ~3.5 W at pull‑in and holding) Coil Type: DC‑operated, hum‑free coil for silent operation Switch Position Indication: Incorporated for visible state of contacts Housing: Compact block design for tight spaces Electrical Ratings Rated Control Supply Voltage (Uc): 220 – 240 V DC Rated Insulation Voltage (Ui): Approx. 690 V (IEC) Rated Impulse Withstand Voltage (Uimp): ~6 kV Rated Operational Current (AC‑15): Up to ~4 A at 220 – 240 V AC (control/auxiliary loads) Rated Operational Current (DC‑13): ~0.4 A at 220 – 240 V DC (control loads) Main/Control Circuit Capability: Suitable for small control and signal switching loads Mechanical Terminal Type: Screw connection, secure wiring Mechanical Endurance: High mechanical life suitable for frequent switching Electrical Switching Frequency: Designed for moderate control switching cycles Contact Material: Standard silver alloy or equivalent industrial contact material Physical Approx. Dimensions: Width: ~52.5 mm Depth: ~46.5 mm Height: ~57.5 mm Weight: ~0.175 kg Enclosure Protection: IP20 at terminals (front protection as panel design allows) Environmental Operating Temperature Range: Typical industrial ambient range (e.g., −25 °C to +55 °C) Storage Temperature Range: Extended (e.g., −40 °C to +80 °C) Pollution Degree: Suitable for industrial control environments Applications Signal and control circuit switching Industrial automation control panels Motor control auxiliary switching Residential/commercial electrical systems Space‑limited relay/contactor functions

Technical Parameters General Product Type: Auxiliary Contact Block Model: OA1G10 Configuration: 1 × Normally Open (NO) contact Accessory Type: Auxiliary contact for control and indication circuits Mounting: Snap‑on or side mounting accessory Electrical Ratings Rated Operational Voltage (Ur): Up to 690 V Insulation Voltage (Ui): 690 V Thermal Current (Ith): 16 A free‑air (ambient) Rated Contact Current: Typical control‑circuit rating compatible with industrial switchgear (up to ~16 A) Contact Type: Single‑pole auxiliary contact (switching contact only) Mechanical & Physical Contact Blocks: 1 normally open contact Terminal Type: Screw termination or compatible connector interface Construction: Compact, block‑style accessory Weight: Approx. 0.015 kg External Dimensions: Approx. 11 mm (width) × 37 mm (height) × 21 mm (depth) Environmental Ambient Operating Temperature: Typical industrial range (approx. −25 °C to +70 °C) Pollution Degree: Industrial environments Protection Rating: Auxiliary terminals rated to IP20 (when installed in panel) Applications Status feedback for disconnect switches and contactors Control circuit signaling in automation panels Auxiliary switching for industrial machinery and electrical systems Integration with motor control centers and switchboards Key Features Single NO auxiliary contact for control signal extension Compact design for space‑saving panel layouts Wide voltage range up to 690 V for versatile use Easy mounting on compatible ABB switchgear and accessories Broad application scope in industrial control systems

Technical Parameters General Product Type: Contactor relay / auxiliary contactor Model: NF22E‑13 Poles: 4 poles (4P) Contact Configuration: 2 × Normally Open (NO) + 2 × Normally Closed (NC) auxiliary contacts Mounting / Terminal Type: Screw terminal connections Design: Block type relay suitable for industrial panels Control / Coil Rated Control Supply Voltage: 100 … 250 V AC/DC Rated Frequency: 50 / 60 Hz (for AC coils) Coil Operation: AC/DC compatible within the specified range Electrical Ratings Rated Operational Voltage (Main/Auxiliary Circuits): Up to 690 V Rated Insulation Voltage (Ui): Up to 690 V (IEC) / 600 V (UL/CSA) Conventional Free‑air Thermal Current (Ith): 16 A Rated Operational Current AC‑15: 6 A @ 24 / 127 V AC 4 A @ 220 / 240 V AC 3 A @ 400 / 440 V AC 2 A @ 500 / 690 V AC Rated Operational Current DC‑13: 6 A @ 24 V DC 2.8 A @ 48 V DC 1 A @ 72 V DC 0.55 A @ 110 / 125 V DC 0.27 A @ 220 / 250 V DC 0.15 A @ 400 V DC 0.13 A @ 500 V DC 0.1 A @ 600 V DC Short‑time Withstand Current (Icw): ~140 A for 0.1 s ~100 A for 1 s Performance Maximum Electrical Switching Frequency: AC‑15: ~1200 cycles/hour DC‑13: ~900 cycles/hour Maximum Mechanical Switching Frequency: ~6000 cycles/hour Physical & Dimensions Width: ~45 mm Depth / Length: ~77 mm Height: ~86 mm Net Weight: ~0.27 kg Environmental & Protection Operating Ambient Temperature: −40 °C to +70 °C Storage Temperature: −60 °C to +80 °C Rated Impulse Withstand Voltage (Uimp): 6 kV Terminal Protection Rating: IP20 (terminals) Pollution Degree: Suitable for industrial environments Maximum Operating Altitude (without derating): ~3000 m Standards & Compliance Conforms to IEC/EN 60947‑5‑1 Complies with UL 508 and CSA C22.2 No.14 Applications Switching auxiliary and control circuits Interfacing between control logic (PLC, switches) and loads Automation control panels and machinery Interlocking and feedback signaling OEM and industrial control system integration

Technical Parameters General Product Type: Rotary selector switch (compact range) Model: C2SS5‑30B‑11 Actuator: Short handle, rotary Illumination: Non‑illuminated Color: Black actuator with chrome metal bezel Mounting: Panel mounting with 22 mm cut‑out Function: Maintained two‑position selector Contact Configuration: 1 × Normally Open (NO) contact 1 × Normally Closed (NC) contact Series: ABB compact C2SS selector switch range Electrical Ratings Rated Operational Voltage: 24 – 300 V AC/DC, max 300 V Rated Current (AC‑15): Suitable for signal/control loads Rated Current (DC‑13): Suitable for low‑power DC control loads Rated Insulation Voltage (Ui): 300 V Rated Impulse Withstand Voltage (Uimp): 6 kV Mechanical & Durability Mechanical Life: Approx. 500,000 operations Connection: Screw terminal connections Terminal Protection: IP20 at terminals Front Protection: High protection (e.g., IP66 / IP67 / IP69K) Pollution Degree: Industrial environments Ambient Operating Temperature: Approx. –25 °C to +70 °C Performance Switching Function: Maintained two‑position (e.g., A–C selector) Mechanical Endurance: High for frequent operator use Panel Sealing: Designed to maintain panel ingress protection when installed Applications Mode or function selection in control panels Manual input for automation control logic Forward/reverse or On/Off selection Operator station input in machinery and systems Signal selection and process control interfaces

Technical Parameters General Product Type: Joystick operator (pilot device) Model: MJS6‑60B Actuator Type: Maintained joystick, multi‑direction control Illumination: Non‑illuminated Actuator Color: Black Mounting Cut‑out Diameter: Standard 22 mm panel hole Series: Modular pilot device Mechanical Operating Positions: Multi‑direction maintained (e.g., left, right, forward, reverse, center) Contact Blocks: Not included (sold separately; snap‑on modular contact blocks for NO/NC functions) Mounting Style: Panel mount with modular contact block installation Mechanical Life: High life for frequent manual actuation Housing Material: Durable industrial‑grade plastic / polycarbonate Electrical Contact Blocks: Optional accessory modules fit onto the base (contacts not included) Contact Ratings: Depend on fitted contact blocks (typically 6 A at 250 V AC for standard NO/NC modules) Connection Type: Screw‑type terminals on contact blocks Electrical Life: Contact block dependent Physical Dimensions (Approx): Width: ~48 mm Height: ~54 mm Depth: ~100 mm (including actuator and contact blocks) Weight: Lightweight operator (contact blocks add weight) Environmental Operating Temperature Range: Typical industrial range (e.g., −25 °C to +70 °C) Storage Temperature Range: Extended range for transport/storage Protection Rating: Front: IP66/IP67 with proper panel sealing Terminals: IP20 Pollution Degree: Suitable for industrial environments Applications Machine control panels and operator consoles Direction selection and manual control for conveyors, hoists, and motors Mode selection in automated systems Manual override in industrial automation Control interface in production equipment