Technical Specifications Specification Typical Value Manufacturer ABB Model / Part Number AF50‑40 (e.g., AF50‑40‑00‑70 or similar variants) Product Type Industrial Power Contactor (AC/DC operated) Contactor Poles 4 main poles (4 NO) Rated Operational Current (AC‑3) ~50 A at 400 V AC (typical) Rated Operational Power (AC‑3) ~22 kW at 400 V AC Rated Operational Current (AC‑1) ~100 A at 400 V AC Control Coil Voltage Wide range variants (e.g., 48‑130 V AC/DC or 100‑250 V AC/DC) Control Circuit Frequency 50/60 Hz (for AC coil versions) Rated Insulation Voltage (Ui) ~1000 V IEC Rated Impulse Withstand Voltage (Uimp) ~8 kV Maximum Breaking Capacity ~1300 A at 440 V AC (cos φ = 0.45) Short‑Time Withstand Current (Icw) ~650 A for 10 s (cold) Mechanical Durability ~10 million operations Electrical Switching Frequency ~300 cycles/hour Operating Temperature Range ~‑40 °C to +70 °C Mounting Style Panel or DIN‑rail (with adaptor) Terminal Type Screw connections Protection Class IP20 at terminals (panel dependent) Applicable Standards IEC 60947‑4‑1 for contactors

Technical Specifications Specification Value Manufacturer ABB Model / Part Number MOD600ADOM4R Product Type Remote I/O Digital Output Module Series / Platform RIO600 Remote I/O System Number of Outputs 4 digital outputs Output Type Discrete digital switching outputs Field Connection Terminal block / field wiring compatible I/O Module Mounting Modular rack or DIN‑rail depending on system Operating Voltage (I/O logic) Typical industrial logic voltage (system dependent) Output Load Capacity Per output current and voltage rating set by system design Communication Interface RIO600 system bus interface to controller or gateway Status Indicators LED indicators for output status Operating Temperature Range Industrial range (e.g., –20 °C to +60 °C) Humidity Rating Standard industrial humidity tolerance Protection Class Typical IP20 (system enclosure dependent) Application Distributed automation control, digital output signaling

Technical Specifications Specification Typical Value Manufacturer ABB Model / Part Number AF305‑30 Product Type 3‑Phase Power Contactor Series AF305 Main Contacts 3 normally‑open (3NO) Auxiliary Contacts Configurations vary by variant (e.g., 1NO+1NC, 2NO+2NC available) Rated Operational Current AC‑3 ~305 A at 380‑415 V AC three‑phase Rated Operational Current AC‑1 ~500 A at 690 V AC Motor Control (AC‑3 Power) Up to ~160 kW at 400 V AC three‑phase Rated Operational Voltage, Main Circuit Up to 1000 V IEC / 600 V UL Control Coil Voltage Range (Uc) Typically 100‑250 V AC/DC (wide coil range available) Control Voltage Frequency 50/60 Hz and DC operation supported Coil Type Magnetic electronic coil with built‑in surge suppression Insulation Voltage (Ui) ~1000 V (IEC) Impulse Withstand Voltage (Uimp) ~8 kV Mechanical Durability ~5,000,000 operations Electrical Switching Frequency ~300 cycles/hour (AC‑3 rated) Mounting Panel or control cabinet mounting Terminal Type Screw / box lug depending on variant Operating Temperature Range ~‑40 °C to +70 °C Protection Class Main terminals typically IP00; coil terminals IP20 Application Motor starting, power switching, industrial automation

Technical Specifications Specification Value Manufacturer ABB Model / Part Number OVR T2 3N 80‑275S P TS QS (also 2CTB815708R0800) Product Type Surge Protective Device (SPD), Type 2 Protection Purpose Protection against transient overvoltages, lightning and switching surges Number of Poles Protected 4 (3 phases + Neutral) Rated Voltage (Uᵣ) 230 V AC Nominal System Voltage (Uₒ) 230 / 400 V AC Maximum Continuous Operating Voltage (U₍c₎) 275 V AC Voltage Protection Level (Uₚ) ~1.4 kV (L‑N, N‑PE) Surge Current Rating (8/20 µs) Max. 80 kA total Nominal Discharge Current (8/20 µs) 20 kA Impulse Current (10/350 µs) ~6.25 kA Rated Service Short‑Circuit Capacity (Iₛₙ) Up to 100 kA Protection Class Class II Standards Compliance IEC 61643‑11 / EN 61643‑11 Mounting DIN‑rail (35 mm) Protection Degree IP20 Operating Temperature Range −40 °C to +80 °C Auxiliary Contacts 1 NO + 1 NC (for remote signalling) Status Indicators Visual indicators for each protection module Auxiliary Circuit Load Min. 12 V DC @10 mA, Max. 250 V AC @1 A Typical Use Surge protection for three‑phase electrical distribution systems

Technical Specifications Specification Value Manufacturer ABB Model / Part Number AS09‑30‑10‑25 AC220V Product Type AC Contactor Number of Poles 3 (three‑phase) Control Coil Voltage 220 V AC, 50/60 Hz Rated Operational Current 9 A (AC‑3 duty at 220/230/240 V AC) Rated Operational Power (AC‑3) ~2.2 kW at 220–240 V AC; ~4 kW at 400–415 V AC Main Contacts 3 × normally open power contacts Auxiliary Contacts 1 built‑in auxiliary contact (often 1 NO) Intended Load Types Three‑phase motors, non‑inductive or slightly inductive loads Rated Utilization Category AC‑1, AC‑3, AC‑15 (varies by application) Rated Insulation Voltage ~690 V Rated Impulse Withstand Voltage ~6 kV Control Circuit Coil Frequency 50/60 Hz Mounting Style Panel/rail mounting Terminal Type Screw terminals Connection Capacity Flexible and rigid conductor options (typical industrial range) Degree of Protection IP20 (front terminals & housing) Operating Ambient Temperature Approximately –40 °C to +70 °C Storage Temperature Range –60 °C to +80 °C Mechanical Durability High cycle mechanical operation Electrical Switching Frequency Up to typical industrial switching cycles

Technical Specifications Specification Value Manufacturer ABB Model / Part Number S202‑K4 Product Type Miniature Circuit Breaker (MCB) Series System pro M compact S200 Number of Poles 2 (2P) Trip Characteristic K‑curve (thermal‑magnetic) Rated Current (Iₙ) 4 A Rated Operational Voltage Up to 400 V AC (per IEC standards) Maximum Operating Voltage 277 Y / 480 V AC (UL/CSA) Rated Frequency 50 / 60 Hz Breaking / Interrupting Capacity ~6 kA (short‑circuit capacity at rated voltage) Rated Insulation Voltage (Uᵢ) ~440 V Rated Impulse Withstand Voltage (Uᵢₘₚ) ~4 kV Mounting Type DIN‑rail (TH35) Terminal Type Screw terminals Contact Position Indication ON (red) / OFF (green) Protection Degree IP20 (installed within panel) Pollution Degree 3 Operational Temperature Range ~‑25 °C to +55 °C Mechanical Endurance ~20 000 cycles Electrical Endurance ~20 000 AC cycles Dimensions (Approx.) Height: 88 mm × Width: 35 mm × Depth: 69 mm Application Overload and short‑circuit protection in electrical distribution boards

Technical Specifications Specification Value Manufacturer ABB Model / Part Number TINA 8A (2TLA020054R0500) Product Type Safety connection block / DYNlink interface Intended Use Connection block for multiple safety devices in a DYNlink safety loop Compatible Systems ABB Vital, Pluto, and related safety controller platforms Number of Connectors 8 × M12 5‑pole female connectors Signal Wiring Individual wiring for each connected sensor signal Supply Voltage 24 V DC (typical) Current Consumption Approx. 15 mA Information Output Current Up to 10 mA Protection Class IP67 (sealed housing) Operating Temperature Range –10 °C to +55 °C Storage Temperature Range –30 °C to +70 °C Housing Material Polyamide or industrial plastic (rugged) Dimensions Approx. 149 × 50 × 43 mm (L × W × H) Weight Approx. 140 g LED / Indicators Status information LEDs (power/signal status) Cable Entry Diameter 7 – 12 mm (recommended cable range) Standards Compliance Conforms to relevant machine safety standards (e.g., EN ISO 13849, EN 61508) Mounting Style Panel / machine frame mounting as part of safety system

Technical Specifications Specification Value Manufacturer ABB Model / Part Number MS2X‑2.5 Product Type Manual Motor Starter / Motor Protection Circuit Breaker Rated Current Setting Range 1.6 – 2.5 A Protection Functions Overload protection, short‑circuit protection, phase failure sensitivity Switching Function Manual ON / OFF Number of Poles 3‑pole (three phase) Rated Operational Voltage Up to ~690 V AC Rated Insulation Voltage ~690 V Rated Frequency 50 / 60 Hz Degree of Protection (Housing) IP20 (finger‑safe) Mounting Type DIN‑rail (standard 35 mm) Trip Mechanism Thermal‑magnetic Handle / Actuator Type Rotary handle or toggle switch Adjustable Overload Release Yes (set to motor current) Disconnect Function Yes (manual disconnect via handle) Short‑Circuit Breaking Capacity Up to high kA levels typical for manual starters Terminal Type Screw terminals Typical Applications Motor protection, manual motor ON/OFF control in industrial circuits

Technical Specifications Specification Value Manufacturer ABB Model / Part Number MJS5‑40B (1SFA611705R4006) Product Type Joystick Control Switch (pilot device) Joystick Type Maintained (4‑position) Number of Directions 4 positions (up, down, left, right) Actuator Style Plastic joystick without self‑return Housing Material Plastic Color Black Mounting Hole Size 22 mm panel cut‑out Contact Blocks Not included (sold separately) Protection Degree (Front) IP66 / IP67 / IP69K (depending on installation) Electrical Rating (with proper contacts) Typical AC‑15: up to 6 A @ 230 V (with appropriate contact blocks) Mechanical Durability High mechanical durability (e.g., >0.5 million operations) Operating Temperature Range Approx. ‑25 °C to +70 °C Weight Approx. 0.05 kg Application Manual directional control in industrial automation Standards Meets relevant IEC/EN pilot device and joystick standards

Technical Specifications Specification Value Product Name ABB CT‑MFC.12 Product Type Multifunction Time Relay Model / Part Number CT‑MFC.12 (1SVR508020R0000) Manufacturer ABB Supply Voltage 24–240 V AC / 24–48 V DC Timing Functions Multiple functions including ON‑delay, OFF‑delay, impulse ON, impulse OFF, flasher starting with ON/OFF, pulse former Time Range 0.05 s to 100 h Contact Configuration 1 changeover contact (SPDT / 1 C/O) Rated Current (Contact) Up to 4 A Rated Operational Voltage (Contact) Up to 250 V AC Rated Frequency 50/60 Hz Mounting Type DIN Rail (35 mm standard) Terminal Type Screw terminals Operating Temperature Range Approx. –20 °C to +60 °C Housing Width Approx. 17.5 mm Height Approx. 70 mm Depth Approx. 63 mm Protection Rating Terminals IP20 / Housing up to IP50 (varies by installation) Weight Approx. 0.05 kg Typical Use Control automation timing and sequence functions

Technical Specifications Specification Value Manufacturer ABB Model / Part Number S202‑K0.5 Product Type Miniature Circuit Breaker (MCB) Series S200 / System pro M Number of Poles 2P (2‑pole) Rated Current (Iₙ) 0.5 A Trip Characteristic K (thermal‑magnetic) Thermal Protection Overload protection via bimetallic element Magnetic Protection Short‑circuit protection Rated Operational Voltage Up to ~400 V AC Frequency 50 / 60 Hz Rated Insulation Voltage (Uᵢ) ~440 V Rated Impulse Withstand Voltage (Uₚ) ~4 kV Breaking / Interrupting Capacity Up to 6 kA (AC) Mounting DIN‑rail (TH35) Connection Terminals Finger‑safe screw terminals Trip Indication ON/OFF indicator (often red/green) Operating Temperature Range ~‑25 °C to +55 °C Width (Modules) 2‑module width Protection Degree IP20 (installed in panel) Application Overload and short‑circuit protection in low‑voltage circuits

Technical Specifications Specification Value Manufacturer ABB Model / Part Number DDA202 AC‑63/0.03 Product Type Residual Current Device (RCD) Block Rated Current (Iₙ) 63 A Number of Poles 2 Residual Current Sensitivity (IΔₙ) 30 mA Type of Residual Current AC type Rated Voltage (Uᵣ) 230 / 400 V AC Rated Operational Voltage 230 V AC Rated Insulation Voltage (Uᵢ) 500 V Rated Impulse Withstand Voltage (Uᵢₘₚ) 4 kV Rated Frequency 50 / 60 Hz Operating Characteristic Instantaneous Electrical Endurance 10 000 cycles Power Loss Approx. 5 W Connecting Capacity (Solid / Flexible) 25 mm² Ambient Operating Temperature ‑25 °C to 55 °C Degree of Protection IP2X Mounting DIN Rail Standards Compliance IEC/EN 61009 standard