Technical Specifications / Parameters Parameter Specification Manufacturer Order Code 2CDS214001R0251 Catalogue Type S204-C25 Brand / Series ABB S200 Series (System PRO M) Device Type Miniature Circuit Breaker (MCB) Number of Poles 4-Pole (4P) (Breaks all three phases and the neutral) Rated Current (In) 25 A Rated Operational Voltage (Ue) 400 V AC (3P+N~) Rated Insulation Voltage (Ui) 500 V AC Rated Impulse Withstand Voltage (Uimp) 4 kV Tripping Characteristic C Curve (Standard magnetic setting. Instantaneous tripping range: 5In to 10In) Rated Breaking Capacity (Icn) 10 kA (at 400V AC, per IEC/EN 60947-2) Utilization Category A Standards Compliance IEC/EN 60947-2 (Primary, for industrial applications). May also comply with relevant sections of IEC/EN 60898-1 for final distribution. Terminal Type Cage Clamp Terminal (Screwless clamp) Connectable Conductors Solid/Fine-stranded Copper: 1 - 25 mm² Recommended Tightening Torque 2.0 - 2.5 Nm Electrical Endurance ≥ 20,000 cycles (at In) Mechanical Endurance ≥ 20,000 cycles Ambient Temperature Range -25°C to +60°C (for calibration, derating above +40°C) Mounting Snap-on mounting on 35 mm top-hat DIN Rail (EN 60715) Module Width 72 mm (4 Poles) Primary Functions Overload Protection, Short-Circuit Protection Protection Features Trip-free mechanism, clear "ON"/"OFF" visual indication. All poles switch simultaneously. Accessory Compatibility Compatible with the full range of S200 Series System PRO M accessories: auxiliary contacts (OF, SD), alarm contacts (OF), shunt trips, undervoltage releases, etc. Common Approvals CE, CCC, KEMA, etc.