Technical Data Parameter Specification / Value (Based on PSS Series Architecture) Product Type Modular, High-Availability DC Power Supply System Input Voltage (AC) 3-phase, 400/480 V AC (Standard for this power class) Input Frequency 50/60 Hz Output Voltage (DC) 24 V DC (Nominal, adjustable) Rated Output Current The core PSS72/124 module is designed to deliver approximately 124 A per module at 24V DC. Rated Output Power Approximately ~3.0 kW per module (if 124A @ 24V). A system with multiple modules can provide significantly higher total power. Redundancy Configuration Full N+1 or N+M Redundancy supported. Modules operate in parallel with active current sharing and are hot-swappable without interrupting the output. Efficiency Very High, typically > 92% at full load. Power Factor (PF) > 0.98 (typical), minimizing reactive power demand. Protection & Monitoring Comprehensive: Overload, short-circuit, overvoltage, overtemperature. System-wide monitoring via communication interface (e.g., CANopen) and relay alarm contacts. Cooling Forced air cooling with temperature-controlled fans. Connection High-current screw terminals or busbars for input and output. Mounting / Enclosure 19-inch rack-mount modules installed in a 500mm deep cabinet (-500L). The cabinet includes integrated power distribution busbars and cooling. Operating Temperature 0°C to +60°C (with specified derating above +40°C or +50°C). Standards & Approvals CE, cULus, ATEX (for specific hazardous area variants), IEC 62368-1, IEC 62133, EN 50178.