Parameters Power & Supply Product Type: Single‑axis servo drive (Lexium 52) ◆ PacDrive 3 platform Rated Supply Voltage: 208 … 480 V AC, 3‑phase (‑15 % / +10 %) Supply Frequency: 50 … 60 Hz ±5 % Continuous Output Current: 6 A (at 8 kHz switching) Peak Output Current: 18 A (3 s peak) Continuous Output Power: ~1.8 kW (≈ 2.41 hp) Continuous Power Rating (drive): ~3.3 kW system context (drive/motor load) Switching Frequency: ~8 kHz Overvoltage Category: III Control & I/O Physical Interface: SERCOS III real‑time motion bus for synchronous motion control with a controller. Digital Inputs: 4 digital inputs (for logic and control signals). Digital Outputs: 2 digital outputs (status or signaling). Logic Control Voltage: 24 V DC (standard industrial control logic). Terminal Connection: Screw terminal blocks (CN1) — typically 0.75…5.3 mm² (AWG 18…10). Compatibility Motors Supported: Designed to work with Schneider servo motors such as SHS and SH3 series (70 mm, 100 mm, 140 mm stacks) optimized for torque and speed with PacDrive systems. Mechanical & Environmental Enclosure Protection: IP20 (indoor industrial applications). Weight: ~1.9 kg (compact, lightweight). Operating Temperature: 0 °C to +50 °C typical industrial range. Environmental Standards: conforms to UL 508C and EN/IEC 61800‑3 (EMC) and CE certified. Features & Highlights Standalone servo drive optimized for precise motion control in automation systems. SERCOS III interface for high‑speed, deterministic motion data exchange with controllers. Integrated digital I/O for simple status and control signals without additional modules. Robust construction with standardized industrial protections and certification. Wide electrical range supports applications worldwide with 208‑480 V AC supply.