Specifications General Module Type: Analog output expansion module Series: Modicon TM3 Number of Outputs: 2 analog outputs Resolution: 12‑bit (11 bits + sign) for fine output control Signal Types Supported: • Voltage: 0…10 V, –10…+10 V • Current: 0…20 mA, 4…20 mA Electrical Supply Voltage: 24 V DC (from TM3 bus or controller) Power Consumption: ~70 mA at 24 V DC (full load) Isolation: • Output to supply: 1500 V AC • Output to internal logic: 500 V AC Load Capabilities: Designed to drive devices that accept either voltage or current analog inputs (refer to controller/manual for exact load limits). Mechanical / Mounting Terminal Type: Removable screw terminal block (5.08 mm pitch) Mounting: DIN rail (TH35) or panel with fixing kit Protection Rating: IP20 (industrial enclosure) Dimensions: approx. 23.6 mm (W) × 70 mm (D) × 90 mm (H) Weight: ~0.115 kg Environmental Operating Temperature: –10 °C to +55 °C (horizontal installation); –10 °C to +35 °C (vertical) Humidity Range: 10–95 % (non‑condensing) Compatibility & Standards Compatible With: Modicon M221, M241, M251 and M262 PLCs/controllers Standards: EN/IEC 61131‑2, EN/IEC 61010‑2‑201, CE certified