The TM200CE60R is a high-density, digital input/relay output module from Schneider Electric's Modicon TM2 I/O expansion system. It stands out for providing an exceptionally high number of relay output points in a single compact module.
Specifications
Parameter Category Specification
General Information
Manufacturer / Series Schneider Electric / Modicon TM2
Model / Part Number TM200CE60R
Article Code TM200CE60R
Product Type TM2 60-Channel Digital Input / Relay Output Module
Digital Inputs (60 points)
Number of Inputs 60 (paired 1:1 with relay outputs)
Input Type Sink or Source (configurable in groups via wiring)
Rated Input Voltage 24 VDC
Operating Voltage Range 19.2 to 30 VDC
Input Current Typically 5 mA per point @ 24 VDC
Input Logic "1" ≥ 15 VDC
Input Logic "0" ≤ 5 VDC
Relay Outputs (60 points)
Number of Outputs 60 (paired 1:1 with inputs)
Contact Type Electro-mechanical relay, Form A (SPST-NO) or Form C (SPDT) (Confirm exact type with datasheet)
Contact Configuration Single-Pole, Double-Throw (SPDT / Form C) is common in this series.
Contact Rating (Resistive Load) 2 A at 250 VAC
2 A at 30 VDC
Minimum Switching Load 10 mA at 5 VDC
Electrical Life ≥ 100,000 cycles at rated load (AC1/DC1)
Mechanical Life ≥ 10,000,000 cycles (no load)
Operate/Release Time Approximately 10 ms / 5 ms (typical)
Electrical & Mechanical
Backplane Current (5V) ~ 150 mA (typical, for internal logic)
Field Power Supply Required externally for input circuits and relay coils (24 VDC).
Isolation Reinforced isolation (≥ 1500 Vrms) between: input groups, relay contacts, and system bus.
Connection Removable screw terminal blocks (typically multiple blocks for I/O and power).
Wire Size 0.2 mm² to 1.5 mm² (AWG 24 to 16)
Module Width Compact format, typically 45 mm or 70 mm (refer to specific dimensional drawing).
Environmental
Operating Temperature 0°C to +55°C (32°F to 131°F)
Storage Temperature -25°C to +70°C
Relative Humidity 10% to 95% (non-condensing)
Pollution Degree 2
Certifications & Software
Standards & Approvals CE, UL, cULus, RCM (subject to specific market version)
Configuration Configured in the controller's programming software (e.g., SoMachine, EcoStruxure Machine Expert). The I/O mapping is automatic.
Compatible Controllers Modicon TM2 controllers (via TM2 bus coupler, e.g., TM2ACTM3R), Modicon M221, M241 logic controllers.