Specifications: Parameter Specification Product Range Lexium 18 (Integrated Servo Drive + Motor) Device Type Integrated Servo System (Drive + Motor) Power Supply Voltage Single-phase, 200-240V AC, 50/60 Hz. Continuous Output Current 1.5 A RMS (This is a key rating defining the drive's power capability). Peak Output Current 4.5 A (for short-duration overload, e.g., acceleration). Motor Type Integrated Permanent Magnet Synchronous Motor (PMSM). Motor Power (Approx.) ~ 0.4 kW (0.55 HP) at 3000 RPM (based on typical performance for this current rating). Feedback System Built-in incremental encoder (likely 2500 ppr or similar) for motor commutation and position control. Control Modes Torque, Speed, Position (internal setpoint or via fieldbus). Communication Interface Requires an optional plug-in communication module (sold separately) for fieldbus connectivity (e.g., CANopen, EtherNet/IP, Modbus TCP, PROFINET). Includes RS-485 port for basic configuration. Integrated Functions Basic motion controller, I/O (digital inputs/outputs), jerk-limited motion profiles. Holding Brake Optional. The "X" suffix may indicate a standard model without an integrated holding brake. Models with brake have a different suffix (e.g., ...M2B). Protection Class Motor: Typically IP65 (shaft seal). Drive section: IP20 (for panel mounting). Configuration Software SoMove or EcoStruxure Machine Expert. Standards & Approvals UL, cULus, CE, RoHS.