Specifications: Parameter Specification Product Range Lexium 18 (Integrated Servo Drive + Motor) Device Type Integrated Servo System (Drive + Motor) Power Supply Voltage Single-phase, 200-240V AC, 50/60 Hz. Continuous Output Current 0.5 A RMS (This defines the drive's continuous power capability). Peak Output Current 1.5 A (for short-duration overload). Motor Type Integrated Permanent Magnet Synchronous Motor (PMSM). Motor Power (Approx.) ~ 0.05 kW to 0.1 kW (approx. 0.07 to 0.13 HP) at rated speed (based on typical performance for this current rating). Feedback System Built-in incremental encoder (e.g., 2500 pulses/rev) for motor commutation and position control. Control Modes Torque, Speed, Position (internal or via fieldbus). Communication Interface Optional plug-in communication module required for fieldbus (e.g., CANopen, EtherNet/IP, Modbus TCP, PROFINET). Includes basic RS-485 port for setup. Integrated Functions Basic motion controller, digital I/O, jogging, homing sequences. Holding Brake Not included (indicated by the "X" suffix). Models with brake have a "B" suffix (e.g., M2B). Protection Class Motor: Typically IP65 (shaft seal). Drive section: IP20 (for panel mounting). Configuration Software SoMove or EcoStruxure Machine Expert. Standards & Approvals UL, cULus, CE, RoHS.