Specifications Category Specification Model Series Lexium 28 EVS08N (Common variants: EVS08N04PC, EVS08N08PC, EVS08N12PC). The numeric suffix (04, 08, 12) indicates the continuous output current rating. Main Power Supply Voltage: 100-240 VAC, ±10% Phase: Single-phase or Three-phase Frequency: 50/60 Hz Control Power Supply 24 VDC (±15%) – for logic circuits and safety functions. Output to Motor Type: 3-phase sinusoidal PWM Rated Continuous Current: 4 A, 8 A, or 12 A RMS (depending on model) Max. Output Frequency: 500 Hz Compatible Motors: BCH2 Series PMSMs and other standard 3-phase synchronous motors. Control Modes • Torque Control • Speed Control • Profile Position Control (via built-in interpolator) • Homing Mode • Master/Slave following Feedback System Supports incremental encoders (SinCos 1 Vpp) and absolute encoders (EnDat 2.2, Hiperface). Communication Interfaces • Fieldbus: Integrated CANopen (DS402 profile) as standard. • I/O: Digital inputs (6), digital outputs (3), analog input (±10V), analog output. • Programming Port: Mini-USB for configuration via SoMove software. Key Features • Integrated Safety: Safe Torque Off (STO) per EN 61800-5-2. • Automatic Tuning: Advanced auto-tuning for mechanical system adaptation. • Functions: Electronic gearing, cam profiling, flying saw, brake control. • Protections: Overcurrent, overvoltage, undervoltage, overload, short circuit, motor overheating. Environmental Ratings Operating Temperature: 0°C to +55°C (with derating above 45°C) Storage Temperature: -25°C to +85°C Humidity: < 95% non-condensing Pollution Degree: 2 Overvoltage Category: II Installation Altitude: Up to 1000m without derating. Mounting IP20 protection degree. Designed for panel mounting on a heat-conducting plate. Certifications CE, UL, cULus. Complies with relevant IEC/EN standards.