The Schneider Electric Compact NSX is a high-performance Moulded Case Circuit Breaker (MCCB) from the Acti 9 / Masterpact series. The model NSX100F refers to the specific frame size (100A) with a standard F-type breaking capacity.

The Schneider Electric iC65N is a standard-breaking capacity, single-pole (1P), 32A Miniature Circuit Breaker (MCB) from the widely used Acti 9 iC60 series. It is a fundamental protection device designed to safeguard single-phase final circuits against overloads and short-circuits in residential, commercial, and light industrial electrical installations.

The Schneider Electric EZD is an economical and compact 4-Pole, 160A Moulded Case Circuit Breaker (MCCB). Designed for simplicity and reliability, it provides essential protection against overloads and short-circuits in three-phase electrical distribution systems that require the neutral conductor to be switched and protected (3P+N).

The Schneider Electric CVS is a versatile and robust 100 Amp, 4-Pole (4P) Moulded Case Circuit Breaker (MCCB) from the Compact Versatile Solution range. The designation "100F" specifies the frame size (CVS100) and the "F" breaking capacity category.

The Schneider Electric EZD is a compact and versatile 3-Pole, 80A Moulded Case Circuit Breaker (MCCB). The "MA" designation indicates it is equipped with a Modular Actuator and a standard thermal-magnetic (TM) trip unit, distinguishing it from the basic fixed-handle versions.

The Schneider Electric iPRF1 is a Type 3 Surge Protective Device (SPD) / Final Distribution Level Protector with a 3P+N (3-phase + neutral) configuration and a maximum discharge current (Imax) of 12.5 kA per mode.

The Schneider Electric iC65H is a high-breaking capacity, 2-Pole, 50A Miniature Circuit Breaker (MCB) from the renowned Acti 9 iC60 series. Designed for demanding electrical installations, it provides reliable protection against overloads and short-circuits in single-phase or split-phase circuits.

The Schneider Electric EZD is a compact and economical 3-Pole, 100A Moulded Case Circuit Breaker (MCCB). Designed for simplicity and reliability, it provides essential protection against overloads and short-circuits in three-phase electrical distribution systems.

The Schneider Electric WATSGB100/4X is a 4-pole (3P+N), 100A industrial-grade manual changeover switch from the robust WATSGB series. Designed for durability and reliability, it enables the safe manual transfer of electrical loads between two independent three-phase AC power sources (e.g., utility supply and backup generator).

The Schneider Electric WATSGB250/4X is a 4-pole (3P+N), 250A heavy-duty manual changeover switch from the industrial-grade WATSGB series. Designed for robust and reliable operation, it enables the safe manual transfer of electrical loads between two independent three-phase power sources, such as the main grid and a backup generator.

The Schneider Electric WATSGA-100/4R is a 4-pole (3P+N), 100A manual changeover switch designed for safe and reliable manual transfer between two independent three-phase AC power sources. It provides a simple, robust, and cost-effective solution for applications where backup power is available but automatic transfer is not required.

The Schneider Electric WATSGA160/4R is a 4-pole (3P+N), 160A manual changeover switch from the reliable WATSGA series. It is designed for safe and dependable manual transfer of electrical loads between two separate three-phase power sources, such as a main utility supply and a backup generator.