The Schneider Electric EA9L is a Type 1+2 Combined Surge Protective Device (SPD) with a 2-Pole (L+N) configuration and a maximum discharge current (Imax) of 40 kA per mode. Part of the Easy9 range for residential and light commercial applications, it provides primary and secondary surge protection in a single, compact device.

The Schneider Electric EZD is a compact and economical 4-Pole, 100A Moulded Case Circuit Breaker (MCCB). The designation "160E" indicates the frame size (EZD160) and the standard "E" breaking capacity.

The Schneider Electric PRD 40 is a Type 1+2 Combined Surge Protective Device (SPD) with a 3P+N (3-phase + neutral) configuration and an enhanced maximum discharge current (Imax) of 40 kA per phase. Designed for high-risk exposure environments, it provides the highest level of primary surge protection at the service entrance against direct or indirect lightning strikes and severe switching transients in low-voltage AC power systems.

The Schneider Electric PRD is a Type 1+2 Combined Surge Protective Device (SPD) with a 3P+N (3-phase + neutral) configuration and a maximum discharge current (Imax) of 20 kA per phase. Designed for installation at the service entrance or main distribution board, it provides the first and main line of defense against direct or indirect lightning strikes and large switching transients in low-voltage AC power systems.

The Schneider Electric EZD is a compact and economical 4-Pole, 400A Moulded Case Circuit Breaker (MCCB). Designed for simplicity and reliable protection in three-phase distribution systems, it provides essential defense against overloads and short-circuits.

The Schneider Electric ABL8 RPM24200 is a programmable digital power meter from the PowerLogic PM800 series. This compact, DIN-rail mounted device is designed for accurate measurement, monitoring, and basic power quality analysis of single-phase or three-phase electrical systems.

The Schneider Electric LC1F500M7C is a heavy-duty industrial contactor from the Tesys F range. It is designed for reliable switching and control of large three-phase motor loads or high-current resistive loads.

The Schneider Electric iC65N is a standard-breaking capacity, 2-Pole, 6A Miniature Circuit Breaker (MCB) with a Type D tripping characteristic. Part of the widely used Acti 9 iC60 series, it is designed to protect circuits with very high inrush currents against overloads and short-circuits.

The Schneider Electric NSC is a high-performance, compact Air Circuit Breaker (ACB) from the Masterpact series. The model NSC630K refers to the 630A frame size with a K-type breaking capacity and a 3-pole configuration.

The Schneider Electric iSCB2 is a compact and intelligent 4-Pole (4P) Earth Leakage Circuit Breaker (ELCB) / Residual Current Circuit Breaker (RCCB) from the Acti 9 range. The designation "20N2" indicates it has a 20A rated current and is a double-pole (2-module) device with a N (Neutral) pole that is also protected and switched.

The Schneider Electric Compact NSX is a versatile 4-Pole Moulded Case Circuit Breaker (MCCB) equipped with an adjustable electronic trip unit. The key feature of this model is its wide adjustable current range of 100A to 160A, accommodated within a single frame (NSX160 or NSX100, typically NSX160 frame for this range).

The Schneider Electric Compact NSX is a high-performance Moulded Case Circuit Breaker (MCCB) from the Acti 9 / Masterpact series. The model NSX160N refers to the specific 160A frame size with an N-type (High) breaking capacity.