Specifications Input Supply: 200–240 V AC (±10%), 1-phase, 50/60 Hz Output Power: 1.5 kW (2 hp) at 240 V Output Current: 7.0 A continuous Overload Capacity: 110% for 60 s every 300 s Output Frequency Range: 0–500 Hz Switching Frequency: 2–16 kHz (adjustable) 4. Physical & Environmental Data Enclosure Rating: IP21 (indoor use, protected against dripping water) Dimensions: 184 × 70 × 155 mm (H × W × D) Weight: ≈ 1.8 kg Cooling: Natural convection (fanless) Ambient Temperature: –10 °C to +50 °C (derating above +40 °C) Relative Humidity: < 95% non-condensing Mounting: Wall or DIN-rail (optional kit) 5. Control & I/O Features Built-in Communication: Modbus RTU via RS‑485 Digital Inputs: 2 (24 V DC, sink/source selectable) Analog Input: 1 (0–10 V / 0–20 mA configurable) Relay Output: 1 (250 V AC, 2 A) Analog Output: 1 (0–20 mA) Integrated Operator Panel: Potentiometer + Start/Stop/Reset buttons Pre-set Macros: Pump, Fan, Conveyor, Hoist, etc. PID Controller: Built-in for simple closed-loop control 6. Motor & Drive Protection Motor Protection: Overload (I²t), stall, phase loss, earth fault Drive Protection: Overvoltage/undervoltage, short circuit, overtemperature Safe Stop: Safe torque off (STO) option via external safety relay 7. Typical Applications Commercial ventilation fans Small water pumps and circulators Conveyors and light material handling Packaging machinery Compressors and mixers (light-duty)

Specifications Input Power: 200–240 V AC, 1‑phase, 50/60 Hz Output Power: 0.37 kW (0.5 hp) at 240 V Output Current: 2.3 A Enclosure Rating: IP21 (finger‑safe, drip‑protected) Dimensions: 152 × 70 × 142 mm (H × W × D) Weight: ≈1.5 kg Cooling: Natural convection (fanless) Ambient Temperature: 0 °C to +50 °C (derating above +40 °C) Key Features Built‑in Modbus RTU via RS‑485 port Essential I/O: 2 digital inputs (24 V DC) 1 analog input (0–10 V / 0–20 mA selectable) 1 relay output (250 V AC, 2 A) 1 analog output (0–20 mA) Integrated Control Panel: Includes potentiometer for speed setting Pre‑programmed Macros: Quick setup for common applications (pump, fan, conveyor, etc.) Motor Protection: Overload, short‑circuit, earth‑fault, and overtemperature protection EMC Compliance: Built‑in RFI filter meets Category C3 standards Typical Applications Small fans and ventilation units Low‑power pumps and circulators Light‑duty conveyors Packaging and labeling machines

Specifications Input: 200-240V AC, 1-phase, 50/60 Hz Output: 0.75 kW (1 HP) at 240V, 4.0 A Motor Control: Voltage/Frequency (V/Hz) control Enclosure: IP21 (finger-safe, drip protected) Dimensions: Ultra-compact (~152 × 70 × 142 mm) Weight: ~1.6 kg Cooling: Natural convection (fanless) Key Features Built-in Modbus RTU (RS-485) Essential I/O: 2 digital inputs 1 analog input (0-10V/0-20mA) 1 relay output 1 analog output (0-20mA) Simple keypad with potentiometer Pre-programmed application macros Basic protection functions Application Areas Small fans and blowers Basic pumps Conveyors Packing machines Material handling equipment OEM machinery

Specifications Compatibility: ACS 100/400/500/600 series drives Display: Monochrome LCD, no backlight Protection: IP20 (indoor use only) Connector: Fixed 9-pin drive connector Dimensions: ~140 × 75 × 25 mm Weight: Approx. 180 g Functions Basic drive control (Start/Stop/Reset) Parameter editing and viewing Real-time monitoring (speed, current, frequency) Fault display and reset Local/Remote mode selection Applications Legacy drive systems maintenance Basic commissioning of older ABB drives Service tool for field technicians Backup interface when PC tools unavailable

Technical Specifications Input Power: 200-240V AC, 1-phase, 50/60 Hz Output Power: 0.75 kW (1 HP) at 240V Output Current: 4.0 A continuous Output Voltage: 3-phase, 0-240V Enclosure: IP21 (indoor use, protected against dripping water) Dimensions: ~185 × 90 × 153 mm Weight: Approximately 2.0 kg Cooling: Convection cooling (fanless) Key Features Simple Control: Basic speed/torque control Built-in I/O: 2 digital inputs (24V DC) 1 analog input (0-10V/0-20mA) 1 relay output (250V AC, 2A) Communication: Optional fieldbus adapters Protection: Overload, short circuit, overtemperature Application Macros: Pre-programmed for common applications Keypad: Basic control panel included Application Areas Small pumps and fans Conveyor systems Packaging machinery Material handling equipment Basic industrial automation OEM machine integration

Specifications Input: 200-240V AC, 1-phase, 50/60 Hz Output: 2.3 A, 3-phase to motor Power Rating: 0.4 kW (0.5 HP) at 240V Enclosure: IP20 (finger-safe, no water protection) Dimensions: Compact design (~150 × 70 × 140 mm) Cooling: Convection cooling (fanless) Features Basic speed control for AC motors Simple I/O: 2 digital inputs, 1 relay output Modbus RTU communication Easy commissioning with basic keypad Overload protection and fault monitoring Applications Small conveyors Fans and blowers Pumps Basic material handling OEM machinery

Specifications Power Characteristics: Input Supply: 200-240V AC, 3-phase, 47-63 Hz Rated Output Current: 1.7 A continuous (at 240V, 40°C ambient) Overload Capability: 110% for 1 minute every 10 minutes Starting Current: Limited to drive rating (soft start capability) Output Frequency Range: 0-500 Hz Carrier Frequency: 1-12 kHz (adjustable to reduce motor noise) Motor Compatibility: Motor Power Ratings: 0.75 kW (1.0 HP) at 200V AC 1.1 kW (1.5 HP) at 240V AC Motor Types: Standard 3-phase asynchronous squirrel-cage motors Maximum Cable Length: 150 m without output filter (shielded cable recommended) Physical & Mechanical Specifications Parameter Specification Enclosure Rating IP21 (indoor use, protection against finger contact and vertically falling water) Dimensions (H×W×D) 190 × 93 × 147 mm (7.5 × 3.7 × 5.8 in) Weight 1.8 kg (4.0 lbs) Cooling Method Natural convection (fanless design) Mounting Wall or chassis mounting (vertical orientation recommended) Ambient Temperature -15°C to +40°C (full rating) 40°C to 50°C (with derating: 1.5% per °C) Storage Temperature -40°C to +70°C Relative Humidity 5-95% (non-condensing) Altitude Up to 1000 m without derating Pollution Degree 2 (normal industrial environment) Control & I/O Capabilities Standard I/O Configuration: Digital Inputs: 3 programmable (24V DC, PNP/NPN selectable) Configurable for start/stop, direction, preset speeds, etc. Digital Output: 1 relay (changeover contact) Rating: 250V AC/30V DC, 2A maximum Configurable for ready, running, fault, alarm signals Analog Input: 1 configurable (software-selectable) 0-10V DC or 0-20 mA (12-bit resolution) Can be used as speed reference or PID feedback Analog Output: 1 programmable (0-20 mA) Can be configured for speed, current, torque, etc. Built-in Potentiometer: Integrated 1 kΩ, 10-turn pot on control panel Control Features: Control Modes: Voltage/Frequency (V/Hz) control with ECO mode Square-law characteristic for fan applications Direct Torque Control (DTC) optionally available Application Macros: ABB Standard (factory default) 3-Wire Control Hand/Auto Control PID Control Torque Control

Specifications Power Characteristics: Input Voltage: 200-240V AC, 3-phase (±10%) Input Frequency: 47-63 Hz Rated Output Current: 7.0 A continuous (at 240V, 40°C ambient) Overload Capacity: 110% for 1 minute every 10 minutes Short Circuit Rating: Withstands output short circuits Motor Compatibility: Motor Power Rating: 1.5 kW (2 HP) at 200V 2.2 kW (3 HP) at 240V Motor Types: Standard asynchronous squirrel-cage motors Number of Motors: Can control one motor per drive Parameter Specification Enclosure Rating IP21 (indoor use, protected against touching hazardous parts and vertically falling water drops) Dimensions (H×W×D) 262 × 149 × 180 mm (10.3 × 5.9 × 7.1 in) Weight 4.2 kg (9.3 lbs) Cooling Method Forced air cooling (integrated fan) Ambient Temperature -15°C to +50°C (derating above 40°C) Storage Temperature -40°C to +70°C Relative Humidity <95% non-condensing Altitude Up to 1000 m without derating Vibration 1.0 g (9.81 m/s²) at 10-150 Hz Control & Performance Features Control Methods: Standard Control: Voltage/Frequency (V/Hz) control with ECO mode Advanced Option: Direct Torque Control (DTC) for superior performance Switching Frequency: 1-12 kHz (adjustable)

Specifications Input Characteristics: Supply Voltage: 200-240V AC, 3-phase (±10%) Frequency: 47-63 Hz Power Factor: 0.98 (typical at full load) Inrush Current: < rated input current Output Characteristics: Output Current: 3.0 A continuous (at 240V, 40°C) Overload Capacity: 110% for 1 minute every 10 minutes Output Frequency: 0-500 Hz Output Voltage: 0-100% of supply voltage Carrier Frequency: 1-12 kHz (adjustable) Power Ratings: Motor Power at 240V: 0.75 kW / 1.0 HP Apparent Power (kVA): 1.2 kVA Efficiency: >97.5% (typical at rated load) Physical Specifications Characteristic Specification Enclosure IP21 (finger-safe, protected against dripping water) Dimensions (H×W×D) Approx. 155 × 73 × 147 mm (6.1 × 2.9 × 5.8 in) Weight 1.1 kg (2.4 lbs) Cooling Method Convection cooling (no fan) Mounting Wall/chassis mounting Ambient Temperature -15°C to +50°C (derating above 40°C) Relative Humidity <95% (non-condensing) Altitude <1000 m without derating

Specifications Characteristic Specification Dimensions ~145 × 75 × 25 mm Weight Approx. 200 g Protection IP20 (for indoor use only) Display 2 × 20 character LCD, no backlight Keys 11 tactile membrane keys Connector Fixed, integrated 9-pin connector Cable 1.5 m integrated straight cable Compatible Drives: ACS-AP-S cabinet drives (ACQ series) ACS 600/6000 series (with appropriate interface) ACS 700 series ACS 800 standard drives Communication: DriveBus protocol (500 kbps) Power Supply: 24 V DC via drive connection Operating Temperature: 0°C to +45°C Storage Temperature: -25°C to +70°C Humidity: 10-90% RH, non-condensing

Technical Specifications Protection Class: IP54 (front panel) Operating Temperature: 0°C to +50°C (+32°F to +122°F) Storage Temperature: -25°C to +70°C (-13°F to +158°F) Relative Humidity: 5-95% non-condensing Vibration Resistance: 1.0 g (9.81 m/s²) at 10-150 Hz Connection: Integrated cable with proprietary 15-pin connector Cable Length: Standard 2-meter integrated cable

Technical Specifications Item Specification Compatibility ACS880 series, ACS800 series drives (requires appropriate adapter) Display Color TFT, typically 5.7-inch QVGA (320 x 240 pixels) Protection Class IP65 (front panel) Interface Resistive touchscreen + membrane function keys Communication DriveBus (with ACS-AP-W Adapter Module) Configuration Requires PC tool: ACS-AP-W Configurator for custom screens Power Supply Typically 24 V DC, sourced from the drive or external supply