The Schneider Electric Altistart 48 Soft Starter — ATS48C48Q is a heavy‑duty industrial soft starter designed to provide smooth starting and stopping control of three‑phase asynchronous motors. It is part of the Altistart 48 series and is intended for demanding applications such as pumps, fans, compressors, and other large motor‑driven equipment requiring reduced mechanical and electrical stresses during motor start‑up and shut‑down. This soft starter supports torque control and integrated motor protection functions in distributions without an internal bypass, and is suitable for both standard and severe duty conditions

The Schneider Electric ComPacT NSX400F MCCB with Micrologic 2.3 electronic trip unit is a robust, high‑performance molded case circuit breaker designed for low‑voltage distribution systems. It provides reliable protection against overloads, short circuits, and fault conditions in industrial and commercial electrical installations. The Micrologic 2.3 trip unit offers adjustable electronic protection (long‑time, short‑time, and instantaneous), enabling tailored coordination and fault‑clearing performance. The breaker complies with international safety standards and is suitable for fixed panel mounting in distribution boards, motor control centers, and power panels.

The Schneider Electric Altistart 22 Soft Starter — ATS22D62Q is a compact industrial soft starter designed to smoothly start and stop three‑phase asynchronous (induction) motors. It helps limit inrush current and reduce mechanical stress on motors and driven equipment, extending service life and improving reliability. It includes an integrated bypass to reduce heat dissipation once the motor is up to speed, and supports installation within machine frames or control panels. This soft starter is suitable for applications such as pumps, fans, compressors, and material handling machinery. It is compatible with Schneider’s SoMove configuration software for parameter setup and transfer.

The Schneider Electric Masterpact MT40H1 Air Circuit Breaker (ACB) is a high‑capacity protective device designed for low‑voltage electrical distribution systems in industrial, commercial, and utility installations. This circuit breaker frame supports electronic trip units such as Micrologic 5.0A, allowing adjustable protection settings against overloads and short‑circuit faults. The MT40H1 is typically configured as a 3‑pole (3P) breaker and features draw‑out or fixed mounting options for easy integration and maintenance. It provides reliable fault interruption, compliance with international electrical safety standards, and modular protection suitable for main or feeder circuits.

The Schneider Electric Micrologic 6.0H Trip Unit is an advanced electronic protection and measurement module designed for use with low‑voltage Masterpact and similar circuit breakers. It provides comprehensive protection with adjustable LSIG protection functions (Long‑time, Short‑time, Instantaneous, Ground fault), integrated power and current metering, and enhanced diagnostics. The “H” designation includes harmonic and power quality measurement capabilities in addition to standard protective functions, enabling detailed system monitoring, advanced coordination, and improved reliability in industrial and commercial electrical distribution systems. The unit supports optional remote communication and ground fault test functions

The Schneider Electric Altivar 61 Variable Frequency Drive (VFD) model ATV61HD11N4Z is an industrial‑grade motor controller designed for three‑phase asynchronous and synchronous motors. It is optimized for pumping and ventilation applications, offering smooth and energy‑efficient speed and torque control. The drive features integrated Level 3 EMC filtering for reduced electromagnetic interference, multiple control profiles including sensorless flux vector control, and adjustable switching frequency for quiet and efficient operation. Communication support through protocols such as CANopen and Modbus enables easy integration into automation systems. This unit is supplied without a remote graphic terminal (standard version) and is suitable for installation in control panels.

The ABB PSE250‑600‑70 Soft Starter is an industrial electronic motor soft starter designed for smooth starting and stopping control of three‑phase induction motors. It provides reduced electrical and mechanical stress during motor start‑up by controlling voltage or torque ramp application, helping improve system reliability and extend motor life. This soft starter includes built‑in electronic overload protection, LED status indicators, and signal relays, and is suitable for use in pumps, compressors, fans, conveyors, and general industrial motor control applications. Operating voltages range widely, making it adaptable for multiple installations.

The Schneider Electric Altistart 48 Soft Starter — ATS48C59Q is an industrial‑grade electronic soft starter designed for smooth starting and stopping of three‑phase asynchronous motors. It controls motor voltage during start‑up to limit inrush current and reduce mechanical and electrical stresses on motors and driven equipment. This unit is intended for heavy duty industrial applications and pump drives, supporting a broad range of motor sizes and operating conditions. It also provides protection functions such as phase failure and thermal protection for both the motor and the starter. The soft starter complies with international standards and can be integrated into automation systems using communication options such as Modbus (via RS‑485)

The Schneider Electric ComPacT NSX250H Molded Case Circuit Breaker (MCCB) is a low‑voltage protective device designed for industrial and commercial electrical distribution systems. It provides reliable protection against overloads, short circuits, and other electrical faults. The NSX250H series is part of Schneider Electric’s ComPacT NSX new generation architecture and is suitable for use as a main or feeder circuit breaker. It can be configured with various trip units (thermal‑magnetic or electronic) to match specific protection and coordination requirements, and is compliant with international safety and performance standards.

The Schneider Electric Altivar Easy 610 Variable Frequency Drive (VFD) – ATV610D30N4 is a compact industrial inverter designed to control three‑phase asynchronous and synchronous motors. It provides reliable speed and torque regulation for applications such as fans, pumps, compressors, and conveyors. The drive features an integrated EMC filter for reduced electromagnetic interference, a wide output frequency range, and multiple preset speeds to simplify commissioning and operation. It is suitable for cabinet‑mounted installation and supports flexible motor control with adjustable parameters for optimized performance in general industrial environments

The Schneider Electric HVX12‑31‑12/K (HVX EP Series) Vacuum Circuit Breaker is a medium‑voltage circuit protection device designed for use in 12 kV AC power distribution networks. It uses vacuum interrupter technology to switch and interrupt fault currents in three‑phase systems with high reliability and minimal contact wear. This breaker is suitable for indoor switchgear applications and industrial or utility networks, offering draw‑out or fixed configurations, robust insulation, and strong breaking capability. It is engineered to help protect distribution lines, transformers, generators, and other critical electrical equipment from overloads and short circuits through rapid interruption of fault currents.

The Schneider Electric HVX 12‑25‑06/E 210 Vacuum Circuit Breaker is a medium‑voltage protective device designed for use in 12 kV AC power distribution systems. It employs vacuum interrupter technology to interrupt and make electrical circuits reliably under load and fault conditions with minimal contact wear, high dielectric strength, and fast arc extinction. The breaker is suitable for indoor switchgear applications and can be configured as a withdrawable (draw‑out) or fixed mounted unit within metal‑clad or metal‑enclosed switchgear. This type of breaker is commonly used to protect feeders, transformers, bus sections, and other critical assets in utility and industrial power distribution networks.