Parameter Category Specification General Information Product Series Eaton MVX9000 (M-Max Series) Article Number / Model MMX34AA1D9F0-0 Type Phase-Conversion AC Drive (Single-Phase Input to Three-Phase Output) Enclosure Rating IP20 / UL Type 1 (Open Chassis) Standards Compliance cULus, CE, RoHS, IEC/EN 61800-5-1 Power Characteristics （这是理解此型号的关键部分） Rated Output Power 7.5 kW (Derived from "34" frame code, representing the 7.5kW/10HP chassis) Output Horsepower (HP) 10 HP Input Supply (Line) 1-Phase, 200-240V AC (+10%/-15%), 50/60 Hz Output to Motor 3-Phase, 0-240V AC, 0-400 Hz Rated Output Current 24 A (Continuous) Derating Requirement MUST BE DERATED! Due to single-phase input, the continuous output current is typically limited to 50-60% of the three-phase input rating. Effective continuous power is ~4-4.5kW. Overload Capacity Limited. Typically 110-120% for 60 seconds due to input rectifier and DC bus stress. Control & Performance Control Methods Enhanced V/f Control, Sensorless Vector Control (SVC) (performance may be limited compared to 3-phase input models). Frequency Reference Sources Analog Input (0-10V, 4-20mA), Digital Presets, Modbus, Keypad Command Sources Digital I/O, Serial Communication, Keypad Standard I/O • Digital Inputs: 4 (24V DC, sink/source) • Digital Output: 1 (Open Collector) • Relay Output: 1 (Changeover, 250V AC/30V DC 2A) • Analog Input: 1 (0-10V/4-20mA) • Analog Output: 1 (0-10V) Communication Ports • RS-485 (Modbus RTU) - Standard • Expansion Slot for optional communication cards Switching Frequency Adjustable 2-16 kHz Key Features • Auto-Tuning • DC Injection Braking • Dynamic Braking Transistor (for external resistor) • PID Controller • Power Loss Ride-Through (limited) • Motor Overload Protection Motor & Protection Suitable Motor Three-Phase Induction Motor, 4-4.5kW (5-6 HP) @ 230V for continuous duty. A 7.5kW motor can be used for light-duty or intermittent applications. Protection Features Overcurrent, Short Circuit, Ground Fault, Overvoltage, Undervoltage, Phase Loss (input), Motor Overload, Overtemperature, DC Bus Undervoltage Physical & Environmental Mounting Panel Mount Dimensions (W x H x D) Approx. 155 x 280 x 205 mm (Same frame as 3-phase 7.5kW models) Weight Approx. 4.5 kg Ambient Temperature 0°C to +50°C (Derating above 40°C). May require better cooling due to higher component stress. Storage Temperature -40°C to +70°C Relative Humidity < 95% RH (non-condensing)