Parameter Specification / Description Manufacturer & Model Eaton SV3-10-0-0-00 Valve Type Manual Directional Control Valve (Monoblock) Series SV3 Operation Method Manual Lever (Spring Return to Center) Number of Positions 3-Position (Forward / Neutral / Reverse) Number of Ways 4-Way (Ports: P (Pump), T (Tank), A (Actuator 1), B (Actuator 2)) Spool Type Code -0-0- (Typically denotes a Spring-Centered, Open Center spool. Note: Must verify exact spool symbol from Eaton catalog.) Nominal Flow Rate 10 US gallons per minute (gpm) [Approx. 38 liters per minute (l/min)] Maximum Operating Pressure Up to 2500 psi (172 bar) – Verify for specific model, as ratings can vary. Port Size & Thread 3/4" - 16 SAE Straight Threads (O-ring seal) – Typical for size 10. (P, T, A, B ports) Body Material Cast Iron Seal Material Standard: Buna-N (Nitrile) for petroleum-based fluids. Other options may be available. Recommended Fluid Petroleum-based hydraulic oils (Type: AW32, AW46, etc.) meeting Eaton specifications. Fluid Temperature Range -40°F to +200°F (-40°C to +93°C) – Typical for standard seals. Mounting Typically via valve body bolts (through-holes). Specific mounting pattern should be confirmed. Weight (Approx.) ~8-10 lbs (3.6-4.5 kg) – Estimated.