Parameter Specification / Description Manufacturer & Model Eaton XTCE400M22A Product Series XTCE Series (Modular Contact Blocks) Contact Configuration 1 Normally Open (NO) (likely indicated by the "M22A" suffix) Utilization Category / Current Rating Typical ratings for XTCE series contact blocks: • AC-15 (For inductive AC loads): Up to 6 A @ 230/240 V AC • DC-13 (For inductive DC loads): Up to 0.3 A @ 24 V DC (Confirm exact ratings for M22A variant from catalog) Rated Insulation Voltage (Ui) 690 V AC / 600 V DC Rated Impulse Withstand Voltage (Uimp) 6 kV Conventional Free-Air Thermal Current (Ith) Typically 10 A Electrical Endurance > 1 x 10⁷ operations (at rated load) Mechanical Endurance > 3 x 10⁷ operations Terminal Type & Wire Size Screw clamp terminals. Maximum wire size typically 2.5 mm² (14 AWG). Degree of Protection IP40 (when mounted on operator and installed in an enclosure). Ambient Temperature Range -25°C to +55°C (for operation; storage may be wider) Mounting Rear-mounting to compatible Eaton pushbuttons, selector switches, pilot lights, etc. (e.g., XB2, XB4, XB5, XB7 series operators). Standards & Approvals IEC/EN 60947-5-1, CE, UL, CSA, CCC (check datasheet for specific model approvals) Material (Contacts) Silver alloy