Parameter Specification / Description Manufacturer & Model Eaton XTCE400M Product Series XTCE Series (Auxiliary Contact Blocks for Large Contactors) Compatible Main Contactors Primarily DILM400. May also fit other large-frame Eaton contactors (e.g., DILM300, DILM500 - verify with catalog). Contact Configuration Highly likely: 1 Changeover Contact (i.e., 1 Normally Open (NO) + 1 Normally Closed (NC) with a common terminal). Contact Material Silver Alloy Rated Operational Current (Ie) For Utilization Category: • AC-15: Up to 10 A @ 230/400 V AC • DC-13: Up to 0.5 A @ 24 V DC (Typical values. Must be verified with official datasheet.) Rated Insulation Voltage (Ui) 690 V Conventional Free-Air Thermal Current (Ith) Typically 15 A or higher. Electrical Endurance > 10 million operations (at rated load) Mechanical Endurance > 20 million operations Terminal Type & Wire Size Screw-clamp terminals. Accepts wire sizes typically up to 2.5 mm² (14 AWG). Degree of Protection IP20 (when mounted on the contactor and installed inside an enclosure). Ambient Temperature Range -25°C to +60°C (for operation) Mounting Method Side-mounted onto compatible large-frame Eaton contactors (e.g., DILM400). Standards & Approvals IEC/EN 60947-5-1, CE, CCC, etc.