Parameter Specification / Description Manufacturer & Model Eaton XTCE150GC Product Series XTCE Series (Auxiliary Contact Blocks) Compatible Main Contactors Primarily for DILM150 frame size contactors. Contact Special Feature Gold-Plated Contacts (GC) for superior reliability in low-level signaling. Contact Configuration Not defined by GC. Must be verified. Common possibilities: 1 NO, or 1 NO + 1 NC. Rated Operational Current (Ie) For Utilization Category: • AC-15: Likely 5 - 6 A @ 230/400 V AC • DC-13: Likely 0.2 - 0.3 A @ 24 V DC (Typical for this size block. Verify with official data.) Rated Insulation Voltage (Ui) 690 V Low-Level Switching Rating Gold contacts excel here. Suitable for dry circuit or low-voltage DC signals (e.g., 5V, 10mA) for PLC inputs. Electrical Endurance > 10 million operations (at rated load; potentially higher for low-level switching). Mechanical Endurance > 20 million operations Terminal Type & Wire Size Screw-clamp terminals. Accepts wire sizes up to 2.5 mm² (14 AWG). Degree of Protection IP20 (when mounted on the contactor inside an enclosure). Ambient Temperature Range -25°C to +60°C (for operation) Mounting Method Side-mounted onto compatible Eaton contactors (e.g., DILM150). Standards & Approvals IEC/EN 60947-5-1, CE, CCC, etc.