Technical Data: Series: Magnecraft / ABB 10 Series Contact Configuration: The standard MM10UR module itself is a single-pole, double-throw (SPDT) relay, also known as 1 Form C. Contacts: 1 Normally Open (NO) and 1 Normally Closed (NC). Coil Voltage: Universal (AC/DC). Rated Voltage Range: 200 - 250V AC, 50/60 Hz AND 200 - 250V DC. Contact Rating (Switching Capacity): Resistive Loads (AC-1): Typically 10 A @ 250V AC / 10 A @ 30V DC. Inductive Loads (AC-15, DC-13): Lower ratings apply (e.g., ~2-3A for motor starters). Always consult the data sheet for specific load category ratings. Electrical Life: Mechanical Life: Typically 10 million operations minimum. Electrical Life: Depends on load; e.g., 100,000+ operations at rated resistive load. Mounting: Designed for use with a standard 8-pin or 11-pin plug-in socket (e.g., ABB PK10 series sockets), which is then mounted on a 35mm DIN-rail. Terminals: Plug-in design for easy replacement. Status Indicator: Red flag/mechanism provides clear, visual indication of the relay's energized/de-energized state. Transient Protection: Not internally fitted as standard. A built-in metal-oxide varistor (MOV) surge suppressor is available as an option (typically denoted by an additional suffix like /M or /V). Standards Compliance: UL 508, CSA, CE, IEC/EN 61810-1.