Technical Parameters Parameter Specification Series ABB Domae / E200 (Residential Series) Product Type Residual Current Circuit Breaker with Overcurrent Protection (RCBO) Order Code / Article Number E218-16-11 Number of Poles 2-Pole (2P) – Both phase and neutral are switched and protected. Rated Current (In) 16 A Overcurrent Tripping Characteristic C-Curve Rated Residual Operating Current (IΔn) 30 mA Residual Current Type Type AC (for sinusoidal alternating residual currents only) Rated Operational Voltage (Ue) 230V AC (Single-Phase) Rated Frequency 50/60 Hz Rated Short-Circuit Breaking Capacity (Icn) 6 kA (Typical for this series) Residual Current Breaking Capacity 1000 A Trip Time at IΔn ≤ 0.3 seconds Trip Time at 5x IΔn (150 mA) ≤ 0.04 seconds Rated Insulation Voltage (Ui) 500V AC Rated Impulse Withstand Voltage (Uimp) 4 kV Standards Compliance IEC/EN 61009-1 (Core standard for RCBOs) Terminals Suitable for solid and stranded copper conductors. Line/N Load Terminals: 1 - 25 mm² / Line/N Supply Terminals: 1 - 16 mm² Terminal Torque 2.0 N·m Mounting DIN Rail (35mm) mounting Mechanical & Electrical Durability ≥ 10,000 operating cycles Ambient Temperature (Operation) -25°C to +55°C (for calibration) Test Button Yes (Yellow), for periodic manual testing of the residual current mechanism. Status Indication Clear ON/OFF (I/O) flag. The handle moves to a mid-position upon tripping, indicating a fault (overcurrent or residual current).