Technical Parameters Parameter / Feature Specification / Detail Model / Type AF400‑30‑11 3‑pole Contactor Main Contact Poles 3 (3‑pole), 3 × Normally‑Open (NO) main contacts Auxiliary Contacts 1 × NO + 1 × NC auxiliary contact block Rated Operational Voltage (Main Circuit) Up to 1000 V AC (IEC rating) Rated Operational Current (AC‑1, general use) Up to 600 A (at 690–1000 V, depending on ambient temp) Motor Load Rating (AC‑3) Up to ~400 A @ 400‑415 V; ~350 A @ 690 V (for motor‑load duty) Maximum Power Handling (AC‑3) Up to ~250 kW–315 kW (depending on voltage & load) Coil / Control Voltage Range Depending on variant: e.g. 100–250 V AC / DC (other coil voltages available) Utilisation Category Suitable for general load switching (AC‑1) and motor switching (AC‑3) duties Contact Making/Breaking Capacity Making capacity up to 10× Ie; breaking capacity up to 8× Ie (per IEC‑60947‑4‑1 for contactors) Terminals / Connections Main circuit: bar‑type terminals (for high-current cables / busbars); Auxiliary: screw‑type terminals Mechanical Durability / Switching Frequency Designed for heavy industrial use, typical mechanical endurance and switching cycles suitable for frequent switching Ambient / Environmental Conditions Operating temperature roughly –40 °C to +70 °C (depending on coil variant and installation); suitable for industrial environments Typical Applications Three‑phase motor start/stop control, heavy load switching, industrial machinery control, power distribution panels, large 3‑phase loads