Technical Parameters General Contactor type: 3-pole power contactor Main contacts: 3 NO Auxiliary contacts: 1 NO + 1 NC Mounting method: Fixed, block-type Application: Motor starting, industrial load switching, AC power circuits Control / Coil Circuit Rated control (coil) voltage: 100–250 V AC (50/60 Hz) or 100–250 V DC Coil technology: Electronic AF wide-range coil Built-in surge suppression: Yes Main Circuit Ratings Rated operational voltage (Ue): Up to 1000 V AC Rated insulation voltage (Ui): 1000 V Conventional thermal current (Ith): 1650 A (at 40°C) Rated Operational Current & Power AC-1 (resistive load) Ie (40°C): 1650 A Ie (55°C): approx. 1450 A Ie (70°C): approx. 1270 A AC-3 (motor duty) Ie at 380/400 V: approx. 1060 A Ie at 690 V: approx. 970 A Rated motor power (Pe): ~315 kW at 230 V ~560 kW at 400 V ~630 kW at 415 V ~710 kW at 440/500 V ~1000 kW at 690 V ~600 kW at 1000 V Withstand Capacity Short-time withstand current (Icw): 10 s: approx. 10,000 A 1 s: approx. 12,000 A 30 s: approx. 7,500 A 1 min: approx. 5,500 A Mechanical / Environmental Mechanical endurance: approx. 250,000–500,000 operations Operating temperature: −25°C to +50°C (typical) Storage temperature: −40°C to +70°C Maximum installation altitude: 3000 m Degree of protection: IP00 (main terminals), IP20 (coil terminals) Design Features Wide-range electronic coil improves stability under voltage variation Reduced coil power consumption Pre-mounted auxiliary contacts included Compatible with auxiliary modules and accessories Heavy-duty frame suitable for industrial environments