Technical Parameters General Performance Type: High-overload gauge pressure transmitter Measured media: Liquids, gases, steam Pressure range: From low spans up to 105 MPa (15,225 psi) depending on sensor option Turn-down ratio: Up to 100:1 Reference accuracy: Up to ±0.06% of calibrated span (depending on configuration) Long-term stability: Typically better than ±0.15% of URL over 10 years Output / Communication 4–20 mA with HART (standard) Optional digital protocols depending on configuration (e.g., Modbus, Profibus PA, Foundation Fieldbus, WirelessHART) Local configuration possible through Through-The-Glass (TTG) keypad without opening housing Mechanical / Materials Wetted parts: Stainless steel or other materials depending on option Diaphragm: Stainless steel or Hastelloy (varies by code) Housing: Aluminum alloy or stainless steel (barrel-type body) Typical process connection: 1/2"–14 NPT female or according to option code Display / Interface “LS” option: Integrated LCD display with local push-buttons Supports configuration, calibration, and diagnostics on site Certifications / Safety SIL2 or SIL3 capable (depending on installation), per IEC 61508 Hazardous-area approvals depending on “TB” / “EY” model options Suitable for safety-critical industrial environments Environmental Designed for extreme process and ambient conditions Wide operating temperature range High resistance to overpressure and vibration