Parameters Category Parameter Specification for S2C-H10 General Type General Purpose, Plug-in "Ice Cube" Relay Contact Configuration SPDT (1 Form C) – 1 changeover contact. Mounting Plug-in to a compatible 8-pin or 11-pin square base socket (e.g., ABB SA series). Coil Data Rated Coil Voltage (Uc) 110 V AC, 50/60 Hz (Most common interpretation of "H10"). Operational Voltage Range 0.85 to 1.1 x Uc (Typically ~85V to 121V AC). Coil Power Consumption Pick-up: ~4.5 VA; Holding: ~2.0 VA (typical). Coil Impedance Approx. 2.7 kΩ (at 50Hz, typical). Contact Data Contact Material Fine Silver or Silver Alloy. Max. Switching Voltage 250 V AC / 30 V DC. Max. Switching Current (Resistive) 10 A (at 250V AC). Max. Switching Power AC-15: 1500 VA (cos φ=0.3); DC-13: 90 W (L/R=40ms). Minimum Switching Load 100 mA at 5 V DC (for reliable contact operation). Performance Electrical Life > 100,000 operations (at rated load). Mechanical Life > 10 million operations. Operate/Release Time Approx. 15 ms / 10 ms (typical for AC coil). Indication Status Indicator Mechanical flag (visible under transparent cover). Terminals Connection Plug-in pins. Wiring is done to the screw terminals of the mounting socket. Environmental Operating Temperature -40°C to +70°C. Storage Temperature -55°C to +85°C. Protection Degree IP40 (with cover, as mounted). Standards Compliance IEC/EN 61810-1, IEC/EN 60947-5-1. Approvals CE, cULus, CCC.