Key Specifications Parameter Category Specification Drive Series/Model ACS150-01e-07A5-2 Rated Output Current 7.5 A Rated Output Power 2.2 kW (3 HP) Input Supply Voltage 200 - 240 V AC (± 10%), 1-phase Input Supply Phases 1-phase Output Voltage 0 - Input voltage Output Phases 3-phase Enclosure Rating IP20 / UL Open Type (Chassis). Must be installed inside a higher-degree protection cabinet (e.g., IP54). Control Panel Standard removable keypad (non-sealed), supports remote mounting via cable. Cooling Method Self-cooled (convection) Control Method Scalar Control (V/f) Key Standard Features • Removable Keypad: Can be mounted remotely. • Flexible Mounting: DIN rail or screw mounting. • Application Macros: Pre-set parameter sets (Hand/Auto, 2-Wire, 3-Wire, etc.). • Analog Input: 1 channel (configurable for 0/4...20 mA or 0...10 V). • Relay Output: 1 changeover contact. • Modbus RTU (RS-485) available via an optional external module. Protection Features • Motor thermal overload protection (I²t model) • Short circuit, ground fault, overcurrent, and overvoltage protection • IGBT overtemperature protection • Motor stall prevention Typical Applications Small pumps, fans, conveyors, and basic material handling equipment.