Technical Parameters Parameter Specification / Value Drive Series & Model ABB ACS350 Compact Drive Product Code ACS350-03E-01A9-4 Rated Output Power 0.37 kW (0.5 HP) Rated Output Current 1.9 A (Decoded from "01A9": 01 = 1.x A, A=10, 9=0.9, so 1.9 A) Input Supply Voltage 3-phase, 380 - 480 V AC (±10%) (*The "-03E" denotes this voltage range and frame size*) Input Supply Frequency 47 - 63 Hz Output Frequency Range 0.1 - 500 Hz Control Method Scalar Control (Volts/Hertz - V/Hz). Enclosure Class IP20 / UL Type 1 (Chassis Type). Must be installed in a protective enclosure. Built-in EMC Filter Typically Not Standard at this micro size. An external filter is recommended/required for EMC compliance. Fieldbus Interface Integrated Modbus RTU via RS-485. Digital/Analog I/O 2 Digital Inputs (DI) 1 Digital Output (DO) - Transistor 1 Analog Input (AI) (0-10 V) 1 Analog Output (AO) (0-20 mA) Overload Capacity 150% of rated current for 60 seconds. Braking Chopper Not built-in. Does not support dynamic braking with a resistor. Safety Function Safe Torque Off (STO) via an optional connection kit. Protection Features Motor thermal overload, overcurrent, short circuit, ground fault, overvoltage, undervoltage. Operating Temperature -10°C to +40°C (without derating). Storage Temperature -40°C to +70°C Mounting DIN-rail mounting (35 mm) Dimensions (WxHxD) Very compact, approximately 45 x 145 x 140 mm (verify with datasheet). Approvals & Standards CE, cULus, RoHS, IEC 61800-5-1.