1SFB536268D1008_ABB_PRODUCT_吉林易择科技技术发展有限公司

Specifications Parameter Specification Supply Voltage 24 V DC (powered from host device) Power Consumption Typically 2-5 W Isolation Voltage 500 V AC (input to output, typical) Communication Speed If PROFIBUS DP: 9.6 kbit/s - 12 Mbit/s If Modbus RTU: 1200 - 115200 baud Data Update Rate ≤ 10 ms (typical for motor data) Number of Process Data Words 4-8 input / 4-8 output words (typical) 3. Mechanical Specifications Parameter Specification Dimensions (W×H×D) Approx. 45 × 90 × 60 mm (estimate) Weight 100-150 g Housing Material Polycarbonate (PC) or Polyamide (PA) Protection Degree IP20 (for enclosure mounting) Mounting Method Direct plug-in to host device Connection Type 9-pin D-sub (if PROFIBUS) or terminal block Operating Position Any (module orientation independent) 4. Environmental Specifications Parameter Specification Operating Temperature -20°C to +60°C (-4°F to +140°F) Storage Temperature -40°C to +85°C (-40°F to +185°F) Relative Humidity 5% to 95% (non-condensing) Altitude ≤ 2000 m above sea level Vibration Resistance 5-2000 Hz, 1g (IEC 60068-2-6) Shock Resistance 15g, 11ms (IEC 60068-2-27) Pollution Degree 2 (IEC 60664-1)

Grace +86 13600179521

DESCRIBE

The ABB 1SFB536268D1008 is a specialized interface or configuration module designed for ABB's modular low-voltage motor control and protection systems. This specific part number identifies a dedicated accessory that adds critical functionality—most commonly communication interfacing or application-specific configuration—to compatible ABB devices such as motor protective relays, soft starter combinations, or intelligent motor starters.

SERVICE HOTLINE Grace +86 13600179521

Mail jilineasyyi@outlook.com ADDRESS Unit 12, 20th Floor, Good View Commercial Centre, 2-16 Garden Street, Mong Kok, Hong Kong

Q Q： info@hongkongeasy.com