NZM2/3-XU24DC_EATON_PRODUCT_吉林易择科技技术发展有限公司

Technical Specifications Parameter Specification / Typical Value Manufacturer / Brand Eaton Model Number NZM2/3-XU24DC Product Line NZM (Accessory for) Device Type Alarm Contact (Trip Indication) Compatible Breaker Frame NZM2, NZM3 Mounting Mounts directly onto the compatible NZM breaker Contact Configuration 1 Normally Open (NO) contact (closes only upon a fault trip) Rated Operational Voltage (Ue) 24 V DC Rated Thermal Current (Ith) e.g., 10 A Utilization Category DC-13: For switching DC electromagnetic loads (e.g., relay coils, PLC inputs). Rated Current at DC-13 e.g., 0.5 A @ 24V DC (Please verify from manual) Electrical Life Typically hundreds of thousands of operations. Mechanical Life Typically millions of operations. Standards Compliance As part of the breaker assembly, it helps comply with IEC 60947-2.

Grace +86 13600179521

DESCRIBE

The Eaton NZM2/3-XU24DC is an Alarm Contact (or Trip Indicator Contact) accessory module designed for the NZM2 and NZM3 frame sizes of Eaton's NZM series molded case circuit breakers (MCCBs). This device is a special type of auxiliary contact that provides a remote electrical signal specifically and only when the breaker has tripped automatically due to an overload or a short-circuit fault. It is mechanically designed to differentiate between a manually switched OFF breaker and one that has tripped on a fault.

SERVICE HOTLINE Grace +86 13600179521

Mail jilineasyyi@outlook.com ADDRESS Unit 12, 20th Floor, Good View Commercial Centre, 2-16 Garden Street, Mong Kok, Hong Kong

Q Q： info@hongkongeasy.com