TMC4AQ2_Schenider_PRODUCT_吉林易择科技技术发展有限公司

The Schneider Electric TMC4AQ2 is an analogue output cartridge designed to expand the output capabilities of a Modicon M241 PLC (Programmable Logic Controller). It provides two configurable analogue outputs that can be used to control external analog devices such as drives, valves, actuators, or other field equipment requiring 0–10 V or 4–20 mA signals. The module has high resolution (16‑bit) for accurate signal generation and integrates into the modular M241 system via a removable spring terminal block

Grace +86 13600179521

DESCRIBE

Specifications Output Channels Number of Outputs: 2 analogue outputs Signal Types: Voltage: 0…10 VDC Current: 4…20 mA DC Resolution: 16‑bit (65,536 steps) for fine signal control Electrical Characteristics Load Impedance: Voltage output: ≥ 2 kΩ Current output: ≤ 500 Ω Conversion & Settling Time: ~10 ms + 1 PLC cycle time Accuracy: ± 0.2 % of full scale @ 25 °C (typical) Temperature Drift: ± 0.006 % of full scale per °C Non‑Linearity: ± 0.05 % of full scale Output Ripple: ± 20 mV typical Electrical Connection & Power Connection Type: Removable spring terminal block, 3.81 mm pitch Supply Voltage: 20.4…28.8 VDC (provided by controller) Power Consumption: ~2 W (typical) Local Indicator: Green LED (PWR) for supply status Isolation & Protection Isolation Voltage: 500 VDC between outputs and internal logic Output Protection: Short‑circuit and open‑circuit protection present Physical & Environmental Dimensions: ~34 mm (W) × 21 mm (D) × 50 mm (H) Weight: ~0.055 kg (55 g) Cable Recommendation: Shielded twisted‑pair cable; < 30 m for reliable output signal

SERVICE HOTLINE Grace +86 13600179521

Mail jilineasyyi@outlook.com ADDRESS Unit 12, 20th Floor, Good View Commercial Centre, 2-16 Garden Street, Mong Kok, Hong Kong

Q Q： info@hongkongeasy.com