Parameters Inputs Number of Input Channels: 8 digital inputs Input Type: Type 1, IEC/EN 61131‑2 Logic Type: Sink/Source (can sense active high/low depending on wiring) Rated Input Voltage: 24 V DC Input Voltage Range: 0…28.8 V DC Rated Input Current: ~5 mA per channel Input Impedance: ~4.7 kΩ Outputs Number of Output Channels: 8 relay outputs Output Type: Relay (NO – Normally Open) contacts Rated Output Voltage: 24 V DC / 220 V AC (up to 250 V AC max) Rated Output Current: 2 A per output Max Load per Common: ~4 A (shared) Turn‑on / Turn‑off Times: Typically ≤ 10 ms Relay Life: ~20 million mechanical cycles (100 k cycles electrical under load) Wiring & Connections Connection Type: Removable screw terminal block for field wiring Max Cable Length: Input: up to ~50 m (164 ft) unshielded Output: up to ~150 m (492 ft) unshielded Indicators & Diagnostics Status LEDs: Green LEDs for each channel indicate input/output state (ON/OFF) Mounting & Environment Mounting: DIN‑rail (TH35) per IEC 60715 Protection Rating: IP20 (indoor industrial use) Weight: ~118 g (4.16 oz) Operating Temperature: Typically −10 °C to +55 °C (consult official datasheet) Features & Benefits Combines digital inputs and relay outputs in one module (saves space). Relay outputs support AC and DC loads up to 2 A, making it versatile for different actuator types. Removable terminals simplify installation and maintenance. Modular expansion supports scalable systems with TM3 bus couplers and controllers. Typical Applications Machine automation logic I/O extension Sensing external switches, presence/limit devices Driving small loads such as indicators, solenoids, contactors (via relay) General purpose industrial control systems