Number of channels: 8 independent thermocouple input channels. Thermocouple type support: compatible with a variety of standard thermocouples (such as J, K, T, E, R, S, B, N, etc.), select the type through software or hardware configuration. Reference junction compensation: automatically compensate the low temperature reference junction to eliminate the influence of ambient temperature on the measurement accuracy.Linearization processing: Built-in algorithms digitally correct the nonlinear thermocouple output to directly output engineering units (e.g degrees Celsius or Fahrenheit). Resolution: 16-bit digital output for high accuracy temperature measurement (± 0.5 ° C typical). Input quarantine: Each channel has independent quarantine (500VDC) to prevent ground loop interference and overvoltage damage.Wiring mode: front panel screw terminal (P3 connector), supporting direct connection of thermocouple. VME bus interface: Support VME bus address decoding and configure I/O access mode through jumper module (single jumper). Expanded features: Optional current loop receiver module (4-20 mA input) for multi-signal type compatibility.Operating temperature: -20 ° C to + 70 ° C (standard industrial grade), select models support a wide temperature range (-40 ° C to + 85 ° C). Protection grade: IP20 (indoor installation), shock resistance 5G (half sine wave), vibration resistance 5-500Hz (3Grms).Reference junction compensation and linearization ensure measurement accuracy and stability over a wide temperature range (-200 ° C to + 1800 ° C). Support multiple thermocouple types to meet the needs of different industrial scenarios.500VDC quarantine is provided between input channels and between channels and ground to effectively suppress electromagnetic interference and common-mode noise. The input port is equipped with overvoltage protection circuit to prevent the module from being damaged by abnormal voltage.Simplify system debugging by quickly switching I/O access modes with jumper modules. VME bus compatibility supports integration with other GEVME modules (such as processors, I/O cards) to build distributed measurement and control systems.Designed with industrial components, MTBF (mean time between failures) ≥ 100,000 hours. Fanless cooling structure, suitable for fanless chassis deployment.