Parameters Parameter Specification Product Series Lexium BSH (Brushless Servo Drives) Device Type Compact Servo Drive Commercial Reference BSH0702P11F2A Power Stage Rating The numeric code "0702" typically indicates the continuous output current. This model is rated for approximately 7 A RMS continuous current (and correspondingly higher peak current). Output Power Corresponds to the motor used (e.g., ~1.5 kW to 3 kW range at common bus voltages). Supply Voltage 3-phase, 200-240 V AC (likely range, as indicated by common BSH ratings). Control Modes Torque, Speed, Position (following setpoint or cam profile). Feedback Interface Supports various motor feedback systems (e.g., EnDat 2.1/2.2, Hiperface, Sin/Cos 1 Vpp). The "F2A" suffix may specify the default or included feedback type. Communication Interface Integrated fieldbus interface (likely CANopen as standard, with options for EtherCAT, PROFINET, etc.). The "P11" part of the code may specify this. Integrated Safety Safe Torque Off (STO) according to SIL 3 / PL e. Programming & Configuration Via Schneider Electric software (SoMachine, EcoStruxure Machine Expert) or dedicated configuration tools. Protection Features Overcurrent, overvoltage, undervoltage, short-circuit, overtemperature, motor overload protection. Cooling Natural convection or forced air (depends on power rating and housing). Mounting Panel mounting. Operating Temperature 0°C to +55°C (with derating above 45°C). Storage Temperature -40°C to +85°C. Standards & Certifications CE, UL, cUL, RoHS compliant.