Parameters Parameter Specification Product Family XS1 - Inductive Proximity Sensors Sensor Type Inductive (Shielded / Flush-mountable) Commercial Reference XS1N05PA310 Housing Shape Cylindrical, Threaded Body Diameter M5 (5 mm diameter) Sensing Distance (Sn) 1 mm (Standardized for steel) Hysteresis ≤ 10% of Sn Output Type NPN (Current Sinking) Output Function Normally Open (NO) (Closes on target detection) Supply Voltage 10 V DC to 30 V DC (Ripple ≤ 10%) Output Current ≤ 200 mA (Continuous) Voltage Drop ≤ 1.5 V DC Switching Frequency Up to 5 kHz Response Time ≤ 0.1 ms LED Indicator Yellow LED for output status (ON when target detected). Electrical Connection 3-wire, 1.5 m PVC cable (standard length). Cable Type PUR (Polyurethane) cable available as an option for harsh environments. Material Housing: Nickel-plated brass; Sensing Face: PBT Protection Rating IP67 (Dust-tight and protected against temporary immersion). Operating Temperature -25°C to +70°C Storage Temperature -40°C to +85°C Target Material Steel (ST37) is standard. Sensing distance is reduced for non-ferrous metals (e.g., brass, aluminum). Refer to derating curves. Standard Target 1 mm x 1 mm x 1 mm (Fe 360) square Mounting Flush-mountable (shielded design allows mounting flush with metal surfaces). Standards & Approvals CE, cULus, RoHS compliant.