Parameters Parameter Specification Product Range Lexium 18 Integrated Servo System Module Type Power Supply & Brake Chopper Module Commercial Reference LXM18PDU02M2X Rated DC Bus Current 2 A (Continuous) Input Power Supply Single-Phase or Three-Phase, 200-240 V AC (+10% / -15%), 50/60 Hz DC Bus Voltage 300 V DC (Nominal) Integrated Brake Chopper Yes Brake Chopper Current 2 A (Peak) External Brake Resistor Required. Must be sized appropriately for the motor's braking energy. A typical option is a 50Ω, 20W or higher wattage resistor, or the Schneider recommended part LXM18BRAKE020 (20W). Communication Interface CANopen (for configuration and monitoring via the connected Lexium 18 drive). Status Indicators Power (PWR), Status (STS), and Network (NET) LEDs. Protection Features Overcurrent, overvoltage, undervoltage, short-circuit, and thermal protection. Cooling Method Convection cooling (fanless). Mounting DIN rail (35 mm). Designed for side-by-side mounting with Lexium 18 servo drives. Ambient Operating Temperature 0°C to +55°C (derating applies above 40°C). Storage Temperature -20°C to +70°C. Relative Humidity 10% to 95% (non-condensing). Protection Class IP20. Dimensions (W x H x D) Approx. 70 mm x 140 mm x 126 mm (Consult official datasheet for precise dimensions). Standards & Certifications CE, UL, cUL, RoHS compliant.