Parameters Parameter Specification Product Range Modicon TM5 Modular I/O System Module Type Digital Input Module (with individual channel isolation) Commercial Reference TM5SDI6D Number of Channels 6 Input Type Sourcing (PNP) only, positive switching. Input Circuit Individually isolated per channel (500 V AC between channels and to bus). Nominal Input Voltage 24 V DC (SELV / PELV) Input Voltage Range 19.2 V DC to 30 V DC "1" Signal Level ≥ 15 V DC "0" Signal Level ≤ 5 V DC Input Current Typically 4 mA per channel at 24 V DC Sensor Supply (for 3-wire PNP) Integrated per channel (via internal serial connection from L+). Used for wire-break detection. Wire-Break Detection Yes, for 3-wire PNP sensors (detects open circuit in sensor supply or signal line). Filtering Time Configurable per channel: 0.1 ms, 0.2 ms, 0.5 ms, 1 ms, 2 ms, 5 ms, 10 ms. Connection Removable screw terminal block (2 terminals per channel: L+ and Input). Diagnostic LEDs Green LED per channel (indicates "ON" state). Module STATUS LED (Green/Red for power, communication, and error states). Group Fault LED (if configured). Bus Interface TM5 bus via connection to a TM5 base (e.g., TM5SBET1). Power Consumption From 5V bus: 90 mA (typical). From 24V field supply: depends on connected sensors. Operating Temperature 0°C to +60°C Storage Temperature -25°C to +70°C Relative Humidity 10% to 95% (non-condensing) Protection Class IP20 (when mounted on a base and installed in an enclosure). Certifications CE, UL, cUL, RoHS compliant.