Parameters Parameter Specification Product Range Modicon TM5 Modular I/O System Module Type 24 V DC Transistor Digital Output Module Commercial Reference TM5SDO8TA Number of Channels 8 Output Type Sourcing (PNP), solid-state transistor (MOSFET) Output Configuration Single, normally open (NO) contact to 24V+ when active. Supply Voltage 24 V DC (for load power) Output Current per Channel 0.5 A maximum (continuous) Total Module Current 4 A maximum (sum of all channels) Maximum Inrush Current 1 A per channel for 100 ms Voltage Drop ≤ 1.5 V (typical at 0.5 A) Leakage Current ≤ 0.1 mA Response Time Turn-on: ≤ 0.1 ms Turn-off: ≤ 0.5 ms Protection Features Individual short-circuit protection with automatic shutdown and self-recovery after fault clearance. Overload and thermal protection. Connection Removable screw terminal block (1 terminal per channel, plus common power terminals). Diagnostic LEDs Green LED per channel (indicates output activation). Module STATUS LED (Green/Red for power, communication, and error states). Group Fault LED (indicates a fault on any channel). Bus Interface TM5 bus via connection to a TM5 base (e.g., TM5SBER2). Power Consumption From 5V bus: 90 mA (typical) From 24V field supply: Depends on connected loads. Operating Temperature 0°C to +60°C Storage Temperature -25°C to +70°C Relative Humidity 10% to 95% (non-condensing) Protection Class IP20 (when mounted on a base and installed in an enclosure). Certifications CE, UL, cUL, RoHS compliant.