The Schneider Electric TSXMBP100 is a single-channel Modbus Plus communication board (also known as a Modbus Plus PCMCIA card) designed for the Modicon Premium series of programmable logic controllers (PLCs).
Parameters
Parameter Specification
Product Series Modicon Premium (TSX Platform)
Module Type Modbus Plus Communication Board (PCMCIA Type II Card)
Commercial Reference TSXMBP100
Communication Protocol Modbus Plus (MB+)
Network Topology Bus (daisy-chain) with terminators.
Data Transfer Rate 1 Megabit per second (1 Mbps)
Media Access Method Token-passing.
Number of Channels 1
Connector 9-pin D-Sub (female) connector for coaxial cable (RG-58) connection.
Cable Type Shielded coaxial cable (RG-58 type, 75 Ω impedance).
Maximum Station Address 64 nodes (addresses 1 to 64) on a single network segment.
Maximum Cable Length 450 meters (1476 feet) per segment without repeaters.
Isolation 1500 V RMS optical isolation between network and PLC logic.
LED Indicators MOD+ (green): Indicates network activity and valid token passing.
ERR (red): Indicates a network communication error.
Compatible PLCs Modicon Premium PLC processors (e.g., TSX P57, P58) with a dedicated communication board slot.
Power Consumption Powered from the PLC backplane (typically 5V DC, current draw minimal).
Operating Temperature 0°C to +60°C (consistent with PLC operating conditions).
Storage Temperature -40°C to +85°C.
Relative Humidity 10% to 95% (non-condensing).
Standards & Certifications CE, UL, cUL, RoHS compliant. Conforms to Modbus Plus specifications.