Parameters Parameter Specification Product Range Modicon TM7 Distributed I/O System Module Type Configurable Digital I/O Module (DI/DO) Commercial Reference TM7SDM12DTFS Number of Points 12 Point Configuration Each point individually configurable as: • 24V DC Digital Input (Sink/Source) • 24V DC Digital Output (Sourcing - PNP) Input Specifications (when configured as DI) Voltage: 24 V DC nominal (19.2 - 30 V DC) "1" Level: ≥ 15 V DC Input Current: ~3-4 mA Filtering: Configurable Output Specifications (when configured as DO) Type: Sourcing (PNP) transistor Voltage: 24 V DC Current per point: 0.5 A max Total Module Current: 4 A max (sum of all active outputs) Protection: Individual short-circuit and overload protection. Configuration Method Via software (EcoStruxure Machine Expert) or potentially via DIP switches/configuration pins. Isolation 500 V AC between field side and communication/power side. Connection Removable pluggable connector (e.g., M12 or M8 connectors, as indicated by the "FS" suffix likely specifying the connector type). Diagnostic LEDs One bi-color (Green/Red) or two LEDs per point to indicate status (e.g., Green=ON/Input Active, Red=Fault). Module STATUS LED (power/communication). Communication Interface Integrated CANopen or Modbus TCP (via the TM7 communication head). Power Supply 24 V DC (via integrated power connector). Operating Temperature -25°C to +70°C Storage Temperature -40°C to +85°C Relative Humidity 10% to 95% (non-condensing) Protection Class Typically IP67 (when connectors are properly mated). The suffix "FS" may indicate a specific sealing or connector family. Mounting Direct mounting via integrated holes or on a DIN rail (with adapter). Certifications CE, UL, cUL, RoHS compliant.