Parameter Specification Product Family Automation / Drive Components (LUCA Compact Power Supply Series) Device Type Switched-Mode Power Supply (SMPS) with Plug-in Terminals Series Reference LUCAX6BL (where X denotes a specific digit or code for power rating) Possible Power Ratings Interpretation based on common patterns: • If X=3, could be 30W (e.g., LUCA36BL). • If X=6, could be 60W (e.g., LUCA66BL). • Other values are possible. Must verify with official datasheet. Output Voltage 24 V DC (regulated) Input Voltage Range 85 - 264 V AC (47 - 63 Hz) — Universal input. Efficiency Typically > 85% (for mid-to-high power models). Regulation (Line/Load) Typically ±1% Ripple & Noise Standard industrial level. For low-noise requirements, consider the "FU" (Filtered) variant. Inrush Current Limiting Yes. Protection Features Short-circuit, overload, and overvoltage protection (automatic recovery). Isolation Reinforced isolation (IEC/EN 61558). Cooling Natural convection (fanless for lower power; may have fan for higher power, e.g., 60W+). Connection Pluggable spring-cage terminal blocks (characteristic of "BL" suffix). Indicators Green LED for output status. Operating Temperature -20°C to +60°C (with derating). Storage Temperature -40°C to +85°C. Relative Humidity 10% to 95% (non-condensing). Safety Standards IEC/EN 61558, UL 508, CSA C22.2 No. 107.1. EMC Standards EN 55011/EN 55022 (Class B), EN 61000-4 series. Protection Class IP20. Mounting DIN-rail (35 mm). Dimensions Width scales with power rating. A 60W model would be wider than a 32W model.