Specifications: Parameter Specification Product Range Lexium 28 (Integrated Servo Drive + Motor) Device Type Integrated Servo System (Drive + Motor) Power Supply Voltage Single-phase, 200-240V AC, 50/60 Hz. Continuous Output Current 3.0 A RMS (This defines the drive's continuous power capability). Peak Output Current 9.0 A (for short-duration overload). Motor Type Integrated Permanent Magnet Synchronous Motor (PMSM). Motor Power (Approx.) ~ 0.75 kW (1.0 HP) at 3000 RPM (based on typical performance for this current rating). Feedback System Built-in incremental encoder (e.g., 2500 pulses/rev) for commutation and position control. Control Modes Torque, Speed, Position (internal setpoint or via fieldbus). Communication Interface Requires an optional plug-in communication module (sold separately) for fieldbus connectivity (e.g., CANopen, Modbus TCP, EtherNet/IP, PROFINET). Includes a basic RS-485 port for configuration. Integrated Functions Basic motion controller, configurable digital I/O, homing sequences. Holding Brake Not included (indicated by the final "X"). Models with an integrated holding brake have a "B" suffix (e.g., M3B). Protection Class Motor: Typically IP65 (shaft seal). Drive section: IP20 (for panel mounting). Configuration Software SoMove or EcoStruxure Machine Expert. Standards & Approvals UL, cULus, CE, RoHS.